•   Important Links
• Staff eMail
• StudentMail
• Blackboard
• Print Credit
• Service Desk Ticketing System

Instructions to set Sleep Mode for HP4250 printer model

The adjustable Sleep Delay feature reduces power consumption when the printer has been inactive for an extended period. You can set the length of time before the printer goes into Sleep Mode to 1 min , 15 mins, 30 mins (default), or to 60 mins, 90 mins, 2 hours or 4 hours.

Note: The printer control panel display dims when the printer is in Sleep Mode.
Sleep Mode does not affect printer warm-up time unless the printer was in Sleep Mode for more than 8 hours.

Set the Sleep Delay

1. Press Menu to open the menus
   
   
2. Press  button (Down button) to highlight CONFIGURE DEVICE 
   
   
3. Press  checkmark (Select button) to select CONFIGURE DEVICE 
   
   
4. Press   button (Down button) to highlight SYSTEM SETUP 
   
   
5. Press  checkmark (Select button) to select SYSTEM SETUP 
   
   
6. Press   button (Down button) to highlight SLEEP DELAY 
   
   
7. Press  checkmark (Select button) to select SLEEP DELAY 
   
   
8. Press   button (Up button) or   button (Down button) to select the appropriate time period 
   
   
9. Press  checkmark (Select button) to set the time period 
   
   
10. Press Menu to exit the menu.
    

Turn Sleep Mode On

1. Press Menu to open the menus 
   
   
2. Press   button (Down button) to highlight CONFIGURE DEVICE 
   
   
3. Press  checkmark (Select button) to select CONFIGURE DEVICE 
   
   
4. Press   button (Down button) to highlight RESETS 
   
   
5. Press  checkmark (Select button) to select RESETS 
   
   
6. Press   button (Down button) to highlight SLEEP MODE 
   
   
7. Press  checkmark (Select button) to select SLEEP MODE 
   
   
8. Press   button (Up button) or   button (Down button) to select ON 
   
   
9. Press  checkmark (Select button) to set the selection 
   
   
10. Press Menu to exit the menu.

• Disclaimer
• Privacy
• Copyright
• Accessibility