Flaherty,
B., McGarry, J.P. and McHugh, P.E., “Mathematical models of cell
motility”, available on-line Cell Biochemistry and Biophysics, 2007.
doi: 10.1007/s12013-007-0045-2,
Invited Paper.
Punchard,
M.A., Stenson-Cox, C., O’Cearbhaill, E., Lyons, E., Gundy, S., Murphy,
L., Pandit, A., McHugh, P.E. and Barron V., “Endothelial Cell Response to
Biomechanical Forces under Simulated Vascular Loading Conditions”,
available on-line Journal of Biomechanics,
2007. doi:10.1016/j.jbiomech.2007.03.029
Mullins
L.P., Bruzzi, M.S. and McHugh, P.E., “Measurement of the
microstructural fracture toughness of cortical bone using indentation fracture”, available on-line Journal of Biomechanics, 2007.
doi:0.1016/j.jbiomech.2007.04.020
Thakral,
R., Kaar, K., McHugh, P.E., Brennan, W. and Lalor, S., “Weber B lateral
malleolar fracture and inter fragmentary screw placement”, available on-line EJOST - European Journal of Orthopaedic Surgery and
Traumatology, 2007. doi:
10.1007/s00590-007-0225-1
Harewood,
F. and McHugh, P.E., “Modelling of size dependent failure in
cardiovascular stent struts under tension and bending”, available on-line
Annals of Biomedical Engineering,
2007. doi:10.1007/s10439-007-9326-6
Barron,
V., Brougham, C., Coghlan, K., McLucas, E., O’Mahoney, D., Stenson-Cox,
C. and McHugh, P.E., “The effect of physiological cyclic stretch on the
cell morphology, cell orientation and protein expression of endothelial
cells”, available on-line Journal
of Materials Science: Materials in Medicine, 2007. doi:10.1007/s10856-007-3125-3
Connolley,
T., Nash, D., Buffiere, J-Y. and McHugh, P.E., “X-ray micro-tomography of a
coronary stent deployed in a model artery”,
available on-line Medical Engineering and
Physics, 2007. doi:10.1016/j.medengphy.2006.10.016
Mullins,
L. McGarry, J.P., Bruzzi, M. and McHugh, P.E., “Micromechanical modelling
of cortical bone”, Computer Methods
in Biomechanics and Biomedical Engineering, Vol. 10, No. 3, pp. 159-169,
2007. doi:10.1080/10255840601110802
Ilie,
D.E., O’Donnell, B.P., McGarry, J.P. and McHugh, P.E.,
“Computational Modelling of the Extrusion of an Al-SiC Metal Matrix
Composite using Macroscale and Microscale Methods”, Journal of Strain Analysis for Engineering Design, Vol. 42, pp.
237-252, 2007. doi:10.1243/03093247JSA232
McDonnell,
P., McHugh, P.E. and O’Mahoney, D., “Vertebral Osteoporosis and
Trabecular Bone Quality”, Annals of Biomedical Engineering, Vol.
35, No. 2, pp. 170-189, 2007. doi:10.1007/s10439-006-9239-9
Donnelly,
E.W., Bruzzi, M., Connolley, T. and McHugh, P.E., “Finite element
comparison of performance related characteristics of vascular stents”, Computer Methods in Biomechanics and
Biomedical Engineering, Vol. 10, No. 2, pp. 103-110, 2007. doi:10.1080/10255840601086234
Harewood,
F. and McHugh, P.E., “Comparison of the Implicit and Explicit Finite
Element Methods using Crystal Plasticity”, Computational Materials Science, Vol. 39, Issue 2, pp. 481-494,
2007. doi:10.1016/j.commatsci.2006.08.002
Caulfield,
B., McHugh, P.E. and Lohfeld, S., “Dependence of mechanical properties of
polyamide components on build parameters in the SLS process”, Journal of Materials Processing Technology,
Vol. 182, pp. 477-488, 2007. doi:10.1016/j.matprotec.2006.09.007
Lohfeld,
S., McHugh, P.E., Serban, D., Boyle, D., O’Donnell, G., Peckitt, N.,
“Engineering
assisted surgery: A route for digital design and manufacturing of customized
maxillofacial implants”, Journal of Materials Processing Technology,
Vol. 183, pp. 333-338, 2007. doi:10.1016/j.jmatprotec.2006.10.028
Breen,
L., McHugh, P.E., McCormack, B.A., Muir, G., Quinlan, N., Heraty, K. and
Murphy, B.P., “Development of a novel bioreactor to apply shear stress
and tensile strain simultaneously to cell monolayers”, Review of Scientific Instruments, Vol.
77, 104301, 2006. doi:10.1063/1.2356857
You,
X., Connolley, T., McHugh, P.E., Cuddy, H. and Motz, C., “A Combined
Experimental and Computational Study of Deformation in Grains of Biomedical
Grade 316LVM Stainless Steel”, Acta
Materialia, Vol. 54, pp. 4825-4840, 2006. doi:10.1016/j.actamat.2006.06.021
Harewood,
F. and McHugh, P.E., “Investigation of Finite
Element Mesh Independence in Rate Dependent Materials”, Computational
Materials Science, Vol 37, pp. 442-453, 2006.
O’Cearbhaill,
E., Barron, V. and McHugh, P.E., “Characterisation of a collagen membrane
for its potential use in cardiovascular tissue engineering applications”,
Journal of Materials Science: Materials
in Medicine, Vol. 17, No. 3, pp. 195-201, 2006.
Murphy,
B.P., Cuddy. H., Harewood, F., Connolley, T. and McHugh, P.E., “The
influence of grain size on the ductility of micro-scale stainless steel stent
struts”, Journal of Materials
Science: Materials in Medicine, Vol. 17, No. 1, pp. 1-6, 2006.
Bruzzi,
M.S. and McHugh, P.E., “Micromechanical modelling of the static loading
of an Al 359-SiC MMC”, Journal of
Engineering Materials and Technology, Vol. 127, No. 1, pp. 106-118, 2005.
Weldon,
L.M., McHugh, P.E., Carroll W., Costello, E. and O’Bradaigh C.M.,
“The influence of passivation and electropolishing on the performance of
medical grade stainless steels in static and fatigue loading”, Journal of Materials Science: Materials in
Medicine, Vol. 16, No. 2, pp. 107-117, 2005.
Farrissey,
L.M. and McHugh, P.E., “Determination of elastic and plastic material
properties using indentation: Development of method and application to a thin
surface coating”, Materials Science and Engineering A,
Vol. 399, pp. 254-266, 2005.
McGarry,
J.P., Murphy, B.P. and McHugh, P.E., “Computational mechanics modelling
of cell-substrate contact during cyclic substrate deformation”, Journal of the Mechanics and Physics of Solids,
Vol. 53, No. 12, pp. 2597-2637, 2005.
Lohfeld,
S., Barron, V. and McHugh, P.E., “Biomodels of Bone: A Review”, Invited article, Annals of Biomedical Engineering, Vol. 33, No. 10, pp. 1295-1311,
2005.
Connolley,
T., McHugh, P.E. and Bruzzi, M.S., “A review of deformation and fatigue
of metals at small size scales”, Fatigue
and Fracture of Engineering Materials and Structures, Vol. 28, No. 12, pp.
1119-1152, 2005.
Albertini,
G., Girardin, E., Giuliani, A., Ilie, D.E., O’Donnell B.P., McGarry, J.P.
and McHugh, P.E., “Micromechanical Finite element simulation and
experimental determination of residual stresses after extrusion process in
metal matrix composites”, Advanced
Composites Letters, Vol. 14, Issue 4, 2005.
McGarry,
J.P., O’Donnell, B.P., McHugh, P.E. and McGarry, J.G., “Analysis of the mechanical performance of a
cardiovascular stent design based on micromechanical modelling”, Computational
Materials Science, Vol. 31, pp. 421-438, 2004.
Stenson–Cox,
C., Barron, V., Murphy, B.P., McHugh, P.E. and Smith, T., “Profiling the
shear stress of atherosclerosis; a genomic view”, Current Genomics, Vol. 5, pp. 287-297, 2004.
Savage,
P., O’Donnell, B.P., McHugh, P.E., Murphy, B.P. and Quinn, D.,
“Coronary stent strut size dependent stress-strain response investigated
using micromechanical finite element models”, Annals of Biomedical Engineering, Vol. 32, No.2, pp. 202-211, 2004.
Bruzzi,
M.S. and McHugh, P.E., “Predicting the effects of overloads on fatigue
crack growth in an Al-SiC MMC using a computational model”, Journal of Engineering Materials and
Technology, Vol. 126, No. 2, pp. 172-178, 2004.
Bruzzi,
M.S. and McHugh, P.E., “Micromechanical investigation of the fatigue
crack growth behaviour of Al-SiC MMCs”, International Journal of Fatigue, Vol. 26, pp. 795-804, 2004.
Barron,
V., Lyons, E., Stenson-Cox, C., McHugh, P.E. and Pandit, A., “Bioreactors
for cardiovascular cell and tissue growth: A review”, Annals of Biomedical Engineering, Vol.
31, No. 9, pp. 1017-1030, 2003.
Bruzzi,
M.S. and McHugh, P.E., “Application of closure based fatigue modelling
methodology to Al-SiC MMCs”, International
Journal of Fatigue, Vol. 25, pp. 577-584, 2003.
McHugh,
P.E. and Connolly, P.J., “Micromechanical modelling of ductile crack
growth in the binder phase of WC-Co”, Computational
Materials Science, Vol. 27, pp.
423-436, 2003.
Fleming,
P., Lenehan, B., O’Rourke, S., McHugh, P.E., Kaar, K. and McCabe, J.P.,
“Strain on the human sciatic nerve in-vivo during movement of the hip and
knee”, The Journal of Bone and
Joint Surgery, Vol. 85-B. No. 3., pp. 363-365, April 2003.
Murphy,
B.P., Savage, P., McHugh, P.E. and Quinn, D. “The stress-strain behaviour
of coronary stent struts is size dependent”, Annals of Biomedical Engineering, Vol. 31, No. 6, pp. 686-691, 2003.
Bruno,
G., Girardin, E. Giuliani, A., Manescu, A., Rustichelli, F., O’Donnell,
B. and McHugh, P.E. “Residual stress analysis in aerospace MMC materials
by neutron diffraction”, Applied
Physics A – Materials Science and Processing, Vol. 74, pp. S1701-S1703, 2002.
Christofides,
C., McHugh, P.E., Forn, A. and Picas J.A., “Wear of a thin surface
coating: modelling and experimental investigations”, Computational
Materials Science, Vol. 25, 1-2, pp. 61-72, 2002.
Bruzzi,
M.S. and McHugh, P.E., “Methodology for modelling the small crack fatigue
behaviour of aluminium alloys”, International Journal of Fatigue, Vol.
24, 10, pp. 1071-1078, 2002.
Bruzzi,
M.S., McHugh P.E., O’Rourke, F. and Linder, T., “Micromechanical
Modelling of the Static and Cyclic Loading of an Al 2141 – SiC
MMC”, International Journal of
Plasticity, Vol. 17, 4, pp. 565-599, 2001.
Farrissey,
L., Ludwig, M., McHugh, P.E. and Schmauder, S., “An atomistic study of
void growth in single crystalline copper”, Computational Materials Science,
Vol. 18, pp. 102-117, 2000.
Schmauder,
S., Melander, A., McHugh, P.E., Rohde, J., Honle, S., Mintchev, O., Thuvander,
A., Thoors, H., Quinn, D. and Connolly, P., “New Tool Materials with a
Structural Gradient for Milling Applications”, J. Phys. IV France, Vol.
9, pp. 147-156, 1999.
Farrissey,
L., Schmauder, S., Dong, M., Soppa, E., Poech, M.H. and McHugh, P.E.,
“Investigation of the Strengthening of Particulate Reinforced Composites
using Different Analytical and Finite Element Models”, Computational Materials Science,
Vol. 15, pp. 1-10, 1999.
Connolly,
P.J. and McHugh, P.E., “Fracture Modelling of WC-Co Hardmetals using
Crystal Plasticity Theory and the Gurson Model”, Fatigue and Fracture of Engineering Materials and Structures, Vol. 22, pp. 77-86, 1999.
McHugh,
P.E. and Mohrmann, R., “Modelling of Creep in a Ni base Superalloy using
a Single Crystal Plasticity Model”, Computational
Materials Science, Vol. 9, pp. 134-140, 1997.
O’Regan,
T.L., Quinn, D.F., Howe, M.A. and McHugh, P.E., ‘‘Void Growth
Simulations in Single Crystals’’, Computational Mechanics, Vol. 20, pp.115-121, 1997.
McHugh,
P.E. and Riedel, H., ‘‘A Liquid Phase Sintering Model: Application
to Si3N4 and WC-Co’’, Acta Materialia, Vol. 45, No. 7, pp. 2995-3003, 1997.
Quinn,
D.F., Connolly, P.J., Howe, M.A. and McHugh, P.E., ‘‘Simulation
Void Growth in WC-Co Hardmetals using Crystal Plasticity Theory’’, Int. J. Mech. Sci., Vol. 39, No. 2, pp.
173-183, 1997.
O’Grady,
M., McCarthy, B., Donnellan, I., McHugh, P.E. and Heslin, P., “Vibration
in an Automobile Internal Rear-View Mirror”, Key Engineering Materials, Vols. 118-119, pp. 35-42, 1996.
O’Regan,
T.L., Quinn, D.F. and McHugh, P.E., ‘‘Finite Element Simulations in
Metals using Remeshing’’, Key
Engineering Materials, Vols. 118-119, pp. 171-178, 1996.
O’Dowd,
N.P., Lim, L.H. and McHugh, P.E., ‘‘Thermomechanical Modelling of
Aluminium Matrix Composites’’, Key
Engineering Materials, Vols. 118-119, pp. 187-192, 1996.
Lim,
L.H., O’Dowd, N.P. and McHugh, P.E., “Computational Modelling of
the Cyclic Behaviour of Aluminium and Aluminium Matrix Composites”, Computational Materials Science, Vol. 5,
pp. 187-194, 1996.
McHugh,
P.E. and Connolly, P., “Modelling the Thermo-Mechanical Behaviour of an
Al alloy-SiC Composite - Effects of Particle Shape and Microscale
Failure”, Computational Materials
Science, Vol. 3, pp. 199-206, 1994.
McHugh
P.E., Asaro R.J. and Shih C.F., “Computational Modeling of Metal Matrix
Composite Materials-I. Isothermal Deformation Patterns in Ideal
Microstructures”, Acta metall.
mater., Vol. 41, No. 5, pp. 1461-1476, 1993.
McHugh
P.E., Asaro R.J. and Shih C.F., “Computational Modeling of Metal Matrix
Composite Materials-II. Isothermal Stress-Strain Behavior”, Acta metall. mater., Vol. 41, No. 5, pp.
1477-1488, 1993.
McHugh,
P.E., Asaro, R.J. and Shih, C.F., “Computational Modeling of Metal Matrix
Composite Materials-III. Comparisons with Phenomenological Models”, Acta metall. mater., Vol. 41, No. 5, pp.
1489-1499, 1993.
McHugh,
P.E., Asaro, R.J. and Shih, C.F., “Computational Modeling of Metal Matrix
Composite Materials-IV. Thermal Deformations”, Acta metall. mater., Vol. 41, No. 5, pp. 1501-1510, 1993.
McHugh,
P.E., Varias, A.G., Asaro, R.J. and Shih, C.F., “Computational Modeling
of Microstructures”, Future Generation
Computer Systems, Vol. 5, pp. 295-318, 1989.