Book Chapters

Fallon, E. (1990) 'The role of CAD in the ergonomics design process' In: Karwowski, W (eds). Computer-Aided Ergonomics. Taylor and Francis, London. [Details]

Fallon, E. (2001) 'The role of computer simulation in human factors and ergonomics' In: Karwowski, W (eds). International Encyclopedia of Ergonomics and Human Factors. Taylor and Francis, London. [Details]

Fallon, E. (2001) 'Allocation of functions: past, present and future perspectives' In: Karwowski, W (eds). International Encyclopedia of Ergonomics and Human Factors. Taylor and Francis, London. [Details]

 

Peer Reviewed Journals

Fallon, E. (1995) 'Basic Guide to System Safety by J.W. Vincoli, Van Nostrand Reinhold (1993)'. Journal of Production Planning and Control, 5 (5). [Details]

Fallon, E. (1996) 'CSCW in Practice: An Introduction and Case Studies, by D. Diaper & C. Sanger'. Ergonomics Abstracts, 28 (4). [Details]

Junker C., (1996) 'Definition and construction of a single switch control environment for music composition'. International Journal of Rehabilitation Research, 19 :79-87. [Details]

McCarthy, J., & Bannon L. (2000) 'Dialogues on function allocation'. International Journal of Human Computer Studies, 52 (2):191-201. [Details]

McCarthy, J., & Bannon L. (Eds.) (2000) 'Special Edition on, Allocation of Functions'. International Journal of Human Computer Studies, 52 (2):191-383. [Details]

Dockrell, S., Kelly, M., Masterson, B., & Shields, N. (2003) 'Ergonomics in schools - Are we meeting the needs of our schoolchildren?'. Physiotherapy Ireland, 24 (2):38-39. [Details]

Fallon, E. (2003) 'A commentary on developing work and quality improvement strategies IV'. AI and Society, 17 (2):192-195. [Details]

Duffy, V., (Eds.) (2007) 'Special Edition on, Advances in Agile Enterprises'. Human Factors and Ergonomics in Manufacturing, 17 (5&6):413-586. [Details]

Dockrell, S., Kelly, M., Masterson, B., Shields, N., (2007) 'School children’s use of computers and teachers’ education in computer ergonomics'. Ergonomics, 50 (10):1657-1667. [DOI] [Details]

Dockrell, S., Kelly, M., Gavin, R., (2009) 'Sources and nature of secondary school teachers' education in computer-related ergonomics'. Computers & Education, 53 (2):504-510. [Details]

Chadwick, L., (2012) 'Human reliability assessment of a critical nursing task in a radiotherapy treatment process'. Applied Ergonomics, 43 :89-97. [DOI] [Details]

 

Conference Publications

Bannon, L., McCarthy, J. (eds.) (1997) Revisiting the Allocation of Functions Issue: New Perspectives ALLFN?97 [Details]

Karwowski, W., (Eds.) (2004) Human and Organisational Issues in the Digital Enterprise Proceedings of the 9th Conference on Human Aspects of Advanced Manufacturing Agility and Hybrid Automation Dept. of Industrial Engineering, National University of Ireland Galway, Ireland, [Details]

       

Conference Paper

Brennan, L., Gallwey, T.J., O'Kelly, M.E.J (1986) Simulation as a tool in ergonomics. Proceedings of IMC3. University College Galway: Conference Paper [Details]

Brennan, L., Gallwey, T.J., O'Kelly, M.E.J (1986) An investigation of the effects of ergonomics principles on flowline productivity. Proceedings of The Ergonomics Society Annual Conference. Durham: Conference Paper [Details]

Brennan, L., Gallwey, T.J., O'Kelly, M.E.J (1986) Simulation modelling as a tool in human factors engineering. Proceedings of The Summer Simulation Conference. Reno, Nevada: Conference Paper [Details]

Brennan, L., Gallwey, T.J., O'Kelly, M.E.J (1987) Effect of production feedback on a self-paced assembly line. Trends in Ergonomics / Human Factors IV. North Holland: Conference Paper [Details]

Dillon, A., Sweeney, M., Herring, V., John, P., (1988) Psychological Investigations of Designer Style. Alvey MMI Conference. Conference Paper [Details]

John, P., Sieumienuch, C., Sinclair, M., (1988) The importance and role of human factors in implementing advanced manufacturing technology. Proceedings of the International Ergonomics Association Congress. Melbourne, Australia: Conference Paper [Details]

Dillon, A., Sweeney, M., & Herring, V., (1991) An investigation of the concept of designer style and its implications for the design of CAD Man-Machine Interfaces. Advances in Industrial Ergonomics and Safety. Conference Paper [Details]

Fallon, E. (1992) Towards the development of a computer-aided shop floor control station design system. Proceedings of the Third International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation. Gelsenkirchen, Germany: Conference Paper [Details]

Saunders, R.P., (1993) The potential threat of repetitive strain injuries to Irish manufacturing industry. Proceedings of the 10th Conference of the Irish Manufacturing Committee. Conference Paper [Details]

Nallen, P.G., McCarthy, M., O'Kelly, M.E.J. (1994) The use of Monte-Carlo simulation in workstation design. Proceedings of the 12th Congress of The International Ergonomics Association. Toronto, Canada: Conference Paper [Details]

Hogan, M., Gill, M., Foley, E. (1995) User requirements for a computerised system of health and safety information in Ireland. Advances in Industrial Ergonomics & Safety. Conference Paper [Details]

Fallon, E. (1996) Does Ergonomics have a role in Irish manufacturing?. Irish Manufacturing Committee (IMC-13), Re-Engineering for World Class Manufacturing. Conference Paper [Details]

Jameson, C.M. (1996) An ergonomic assessment of the appropriateness of primary school furniture in Ireland. Advances in Applied Ergonomics. Conference Paper [Details]

Gill,M., (1997) The effectiveness of using combined mimic / emergent features and mimic / multi-level flow modelling displays in a pilot process control environment. Engineering Psychology and Cognitive Ergonomics, Job Design and Product Design. Conference Paper [Details]

Kearney, D. (1997) The role of the user in the Irish software industry. ALLFN’97, Revisiting the Allocation of Functions Issue: New Perspectives. Conference Paper [Details]

O'Reilly, C. (1997) An investigation into the effects of vibration exposure and seating on ride comfort in buses on Irish roads. From Experience to Innovation. Institute of Occupational Health, Finland: Conference Paper [Details]

Kelly, M.B., (1999) Usability of Computer Aided Ergonomics (CAE) Tools: Users’ perceptions. Proceedings of the International Conference on Computer-Aided Ergonomics and Safety. Universitat Politecnica De Catalunya, Barcelona: Conference Paper [Details]

O'Neill, N., Kelly, M.B., (1999) The Relevance of Ergonomic Issues in Developing and Selecting Shiftwork Systems in Large Manufacturing Industries in Ireland. ICPR-15 Manufacturing for a Global Market. University of Limerick, Limerick: Conference Paper [Details]

O'Regan, N. (2000) An ergonomic evaluation of hand tool and workstation design in an industrial setting. IMC-17 Building on Manufacturing Advances of the Nineties; Proceedings of the 17th Conference of the Irish Manufacturing Committee. Department of Industrial Engineering, National University of Ireland, Galway: Conference Paper [Details]

Fernandez Carro, L., Diez Campa (2002) An investigation of the impact of cleanroom environments on workers in the medical device manufacturing industry. Contemporary Ergonomics 2002, Proceedings of The Ergonomics Society Annual Conference. Cambridge: Conference Paper [Details]

Mitchell, D. A., Diez Campa (2002) An investigation of the relative accuracy of 3D motion analysis and electrogoniometers in measuring wrist flexion and extension. Proceedings of the 2nd International Conference on Occupational Risk Prevention, Gran Canaria Island. Gran Canaria Island: Conference Paper [Details]

Conway, S., Duignan, C., (2003) An assessment of the physiological effects on baggage handlers of unloading and loading an aircraft while using a mobile baggage conveyor system. Ergonomics in the Digital Age, Proceedings of the XVth Triennial Congress of The International Ergonomics Association; 7th Joint Conference of the Ergonomics Society of Japan and the Japanese Ergonomics Society. Seoul Korea: The Ergonomics Society of Korea: Conference Paper [Details]

Nugent, R., Hegarty, S., (2007) An ergonomic study of blocklaying. Contemporary Ergonomics 2007, Proceedings of The Ergonomics Society Annual Conference. Nottingham: Conference Paper [Details]

Dunne, M., (2007) An ergonomic evaluation of the seated position at a hairdresser’s workstation. Contemporary Ergonomics 2007, Proceedings of The Ergonomics Society Annual Conference. Nottingham: Conference Paper [Details]

Chadwick, L., (2007) Applying human error identification in dental care. Ergonomics in Contemporary Enterprise, Proceedings of the 11th Conference on Human Aspects of Advanced Manufacturing Agility and Hybrid Automation. Poznan, Poland: Conference Paper [Details]

Dockrell, S., Kelly, M., Galvin, R., (2008) Computers use and ergonomics in post primary schools. Irish Ergonomics Review, Proceedings of the Annual Irish Ergonomics Scoiety Annual Conference. Conference Paper [Details]

Chadwick, L., (2008) Examining the application of a Human-Error Identification technique to determine the Performance-Shaping Factors that affect dental care. Int. conference, Healthcare systems, Ergonomics and Patient Safety. Strasbourg, France: Conference Paper [Details]

Chadwick, L., (2008) The analysis and application of Human Error Identification in dental care. AHFE. Las Vegas: Conference Paper [Details]

Nugent, R., Gill, D., (2008) An ergonomic assessment of blocklaying task elements using the Quick Exposure Check . AHFE International; Proceedings of the Second International Conference on Human Factors and Ergonomics jointly with 12th International Conference on Human Aspects of Advanced Manufacturing. Las Vegas; USA: Conference Paper [Details]

Nugent, R. (2009) Evaluating musculoskeletal disorder risk to Irish Plasterers using the Quick Exposure Check . 17th World Congress on Ergonomics organised by the International Ergonomics Association and the Chinese Ergonomics Society. Beijing, China: Conference Paper [Details]

Chadwick, L., van der Putten, W.J. (2009) Learning from Risk Assessment in Radiotherapy. DIGITAL HUMAN MODELING, PROCEEDINGS. Conference Paper [Details]

Chadwick, L., O'Brien (2009) Opportunities for Error Recovery Related to Hand Written Hospital Prescriptions in a Critical Care Environment. Conference Paper [Details]

Chadwick, L., van der Putten, W.J., (2009) Risk Assessment in Radiotherapy - Lessons from Systems Engineering. WC 2009, IFMBE Proceedings 25/XII. Conference Paper [Details]

Chadwick, L., van der Putten, W.J., Kelly, J., (2009) Risk assessment of patient records in radiotherapy. 26th International Conference of the International Society for Quality in Health Care: Designing for Quality. Dublin, Ireland: Conference Paper [Details]

Chadwick, L. (2010) HFMEA™ of a Radiotherapy Information System - Challenges & Recommendations for Future Studies. Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries. Boca Raton, Fl: Conference Paper [Details]

Power, F. Integrating Occupational Health and Safety Activities with Total Quality Management. TQM and Human Factors - towards successful integration. Centre for Studies of Humans, Technology and Organisation, Linkoping: Conference Paper [Details]

Conference Poster

Nugent, R., (2009) Analysing task elements in blocklaying. Irish Ergonomics Review, Proceedings of the Annual Irish Ergonomics Scoiety Annual Conference. Conference Poster [Details]

           

Other Item

Fitzgerald, K., (1998) Study to investigate incorporation of needs of sports spectators in stadia design in Ireland. The Barbour Index Microfiche No. 7120. Other Item [Details]

Chadwick, L., van der Putten, W.J. (2009) Risk Assessment in Radiotherapy using tools from Systems Engineering. 1st International conference on Modern Radiotherapy: Challenges and advances in radiation protection of patients, French Nuclear Regulator. Versailles, France: Other Item [Details]

Chadwick, L., van der Putten, W.J. (2010) An Analysis of the Impact of Trends in Automation on Roles in Radiotherapy Using Function Allocation. Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries. Boca Raton, Fl: Other Item [Details]

 

Reviews

Fallon, E. (1987) Report on the Fourth Industrial Ergonomics and Safety Conference. The Ergonomist, The Ergonomics Society UK. Miami, Florida: Reviews [Details]

 

Technical Publication

Duignan, C., (2005) Best Manual Handling Practices at Dublin Airport: Executive Summary. Health and Safety Authority. Dublin: Technical Publication [Details]

Duignan, C., (2005) Best Manual Handling Practices at Dublin Airport: Final Report. Health and Safety Authority. Dublin: Technical Publication [Details]