Dr. Annette M. Harte

B.E.,M.ENG.SC.,PH.D.,C.ENG.,M.IEI

Contact Details

Senior Lecturer
Dept. of Civil Engineering
Civil Engineering Building
NUI Galway

T: Ext. 2732
E: annette.harte@nuigalway.ie
 
researcher

Biography

Peer Reviewed Journals

  Year Publication
(2013) 'Comparison of vibrational comfort assessment criteria for design of timber floors among the European countries'
Zhang, B., Jorissen, A., Rasmussen, B, Harte, A. (2013) 'Comparison of vibrational comfort assessment criteria for design of timber floors among the European countries'. Engineering Structures, 52 (1):592-607 [DOI] [Details]
(2013) 'Finite element modelling of castellated timber I-joists'
Baylor, G, Harte, A.M. (2013) 'Finite element modelling of castellated timber I-joists'. Construction And Building Materials, 47 (Oct 2013):680-688 [DOI] [Details]
(2013) 'Nonlinear numerical modelling of FRP reinforced glued laminated timber beams'
Raftery, G.M., Harte, A.M. (2013) 'Nonlinear numerical modelling of FRP reinforced glued laminated timber beams'. Composites Part B-Engineering, 52 (Sep 2013):40-50 [DOI] [Details]
(2013) 'Localised assessment of pipeline integrity during ultra-deep S-lay installation'
O'Grady, R,Harte, A (2013) 'Localised assessment of pipeline integrity during ultra-deep S-lay installation'. Ocean Engineering, 68 :27-37 [DOI] [Details]
(2011) 'Structural evaluation of castellated timber I-joists'
Harte, A.M., Baylor, G. (2011) 'Structural evaluation of castellated timber I-joists'. Engineering Structures, 33 (12):3748-3754 [Details]
(2011) 'A Probabilistic Approach to the Simulation of Non-Linear Stress-Strain Stress-Strain Relationships for Oriented Strandboard Subject to In-Plane Tension'
McTigue, A. T. & Harte, A.M. (2011) 'A Probabilistic Approach to the Simulation of Non-Linear Stress-Strain Stress-Strain Relationships for Oriented Strandboard Subject to In-Plane Tension'. Key Engineering Materials, 478 :54-63 [DOI] [Details]
(2011) 'Low-grade glued laminated timber reinforced with FRP plate'
Raftery, GM,Harte, AM (2011) 'Low-grade glued laminated timber reinforced with FRP plate'. Composites Part B-Engineering, 42 :724-735 [DOI] [Details]
(2009) 'Bond quality at the FRP-wood interface using conventional wood laminating adhesives'
Raftery, G., Harte, A. and Rodd, P. (2009) 'Bond quality at the FRP-wood interface using conventional wood laminating adhesives'. International Journal of Adhesion and Adhesives, 29 (2):101-110 [Details]
(2009) 'Bonding of FRP materials to wood using thin epoxy gluelines'
Raftery, GM,Harte, AM,Rodd, PD (2009) 'Bonding of FRP materials to wood using thin epoxy gluelines'. International Journal Of Adhesion And Adhesives, 29 :580-588 [DOI] [Details]
(2008) 'Qualification of wood adhesives for structural softwood glulam with large juvenile wood content'
Raftery, G., Harte, A. and Rodd, P. (2008) 'Qualification of wood adhesives for structural softwood glulam with large juvenile wood content'. Journal of the Institute of Wood Science, [Details]
(2007) 'Overinjection of thermoplastic composites II. Numerical simulation'
Harte, AM,Mc Namara, JF (2007) 'Overinjection of thermoplastic composites II. Numerical simulation'. Journal Of Materials Processing Technology, 182 :21-27 [DOI] [Details]
(2007) 'Overinjection of thermoplastic composites I. Processing and testing of components'
Harte, A.M., McNamara, J.F. (2007) 'Overinjection of thermoplastic composites I. Processing and testing of components'. Journal of Materials Processing Technology, 182 :12-20 [Details]
(2006) 'Use of micromechanical modelling in the material characterisation of overinjected thermoplastic composites'
Harte, AM,Mc Namara, JF (2006) 'Use of micromechanical modelling in the material characterisation of overinjected thermoplastic composites'. Journal Of Materials Processing Technology, 173 :376-383 [DOI] [Details]
(2006) 'Effect of additional webs on structural performance of I-beams'
Bahadori Jahromi, A., Zhang, B., Harte, A., Walford, B., Bayne, K. & Turner, J (2006) 'Effect of additional webs on structural performance of I-beams'. J. Institute of Wood Science, 17 (2):148-158 [Details]
(2006) 'Characterizing the wave environment in the fatigue analysis of flexible risers'
Sheehan, JM,Grealish, FW,Harte, AM,Smith, RJ (2006) 'Characterizing the wave environment in the fatigue analysis of flexible risers'. Journal Of Offshore Mechanics And Arctic Engineering-Transactions Of The Asme, 128 :108-118 [DOI] [Details]
(2006) 'Influence of cross-section on the strength of timber beams'
Bahadori-Jahromi, A,Kermani, A,Zhang, B,Harte, AM,Bayne, K,Turner, J,Walford, B (2006) 'Influence of cross-section on the strength of timber beams'. Proceedings Of The Institution Of Civil Engineers-Structures And Buildings, 159 :103-114 [Details]
(2005) 'Development of an analytical tool for the design of deep water riser/flow line thermal insulation systems'
Williams, D,Harte, A,Grealish, F (2005) 'Development of an analytical tool for the design of deep water riser/flow line thermal insulation systems'. Journal Of Offshore Mechanics And Arctic Engineering-Transactions Of The Asme, 127 :96-103 [DOI] [Details]
(2004) 'A coupled temperature-displacement model for predicting the long-term performance of offshore pipeline insulation systems'
Harte, AM,Williams, D,Grealish, F (2004) 'A coupled temperature-displacement model for predicting the long-term performance of offshore pipeline insulation systems'. Journal Of Materials Processing Technology, 155 :1242-1246 [DOI] [Details]
(2004) 'A Multilevel Approach to the Optimisation of a Light Rail Vehicle Bodyshell'
Harte, A. M., McNamara, J. F. & Roddy, I. D. (2004) 'A Multilevel Approach to the Optimisation of a Light Rail Vehicle Bodyshell'. J. Comp.Str, 63 (03-Apr):447-453 [DOI] [Details]
(2004) 'A combined riser mooring system for deepwater applications'
Hogg, B,Harte, AM,Grealish, F (2004) 'A combined riser mooring system for deepwater applications'. Journal Of Offshore Mechanics And Arctic Engineering-Transactions Of The Asme, 126 :273-279 [DOI] [Details]
(2003) 'Application of optimization methods to the design of high performance composite pipelines'
Harte, A.M., McNamara, J.F. & Roddy, I.D. (2003) 'Application of optimization methods to the design of high performance composite pipelines'. J. Materials Processing Technology, 142 (1):58-64 [Details]
(2001) 'Finite Element Modelling of the Semi-Rigid Behaviour of Pultruded FRP Connections'
Harte, A.M & McCann, D. (2001) 'Finite Element Modelling of the Semi-Rigid Behaviour of Pultruded FRP Connections'. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 119 :98-103 [Details]
(2001) 'Evaluation of optimisation techniques in the design of composite pipelines'
Harte, A.M., McNamara, J.F. & Roddy, I. (2001) 'Evaluation of optimisation techniques in the design of composite pipelines'. Journal of Materials Processing Technology, 118 :478-484 [Details]
(1993) 'Modelling procedures for the stress analysis of flexible pipe cross sections'
Harte, A.M. and McNamara, J.F. (1993) 'Modelling procedures for the stress analysis of flexible pipe cross sections'. Journal of Offshore Mechanics and Arctic Engineering; Trans. of the ASME, 115 :46-51 [Details]
(1993) 'Numerical Modelling of Heat Transfer during Overinjection of Thermoplastic Composite Materials'
Harte, A.M & McNamara, J.F. (1993) 'Numerical Modelling of Heat Transfer during Overinjection of Thermoplastic Composite Materials'. Engineering Materials, 86-87 :115-122 [Details]
(1992) 'Three-Dimensional Analytical Simulation of Flexible Pipe Wall Structure'
McNamara, J.F. & Harte, A.M (1992) 'Three-Dimensional Analytical Simulation of Flexible Pipe Wall Structure'. Trans. of the American Society of Mechanical Engineers; J. Offshore Mechanics and Arctic Engineering, 114 (2):69-75 [Details]

Book Chapters

  Year Publication
(2012) 'Comparison of vibrational serviceability criteria for design of timber floors among the European Union countries'
Zhang, B., Rasmussen, B., Jorissen, A., Harte, A. (2012) 'Comparison of vibrational serviceability criteria for design of timber floors among the European Union countries' In: Net-acoustics for timber-based lightweight buildings and elements. Brussels: COST. [Details]
(2009) 'Timber engineering: an introduction'
Harte, A.M. (2009) 'Timber engineering: an introduction' In: ICE manual of construction materials. [Details]
(2009) 'Repair of Glulam using GFRP rods'
Raftery, G.M. & Harte, A.M. (2009) 'Repair of Glulam using GFRP rods' In: Structural Studies, Repairs and Maintenance of Heritage Architecture XI. Wessex, UK: WIT Press. [Details]
(2003) 'Short and long-term performance of polymer foam insulation systems in deepwater offshore applications'
Harte, A.M., Williams, D. & Grealish, F. (2003) 'Short and long-term performance of polymer foam insulation systems in deepwater offshore applications' In: Advanced Composites: The Balance Between Performance and Cost. [Details]
(1997) 'Finite element thermomechanical modelling of overinjected thermoplastic composite components'
Harte, A.M. & McNamara, J.F. (1997) 'Finite element thermomechanical modelling of overinjected thermoplastic composite components' In: Advances in Computational Engineering Science. [Details]
(1995) 'Materials characterisation of overinjected thermoplastic components'
Harte, A.M. & McNamara, J.F. (1995) 'Materials characterisation of overinjected thermoplastic components' In: Constitutive Laws. Experiments and Numerical Implementation. [Details]

Conference Publications

  Year Publication
(1995) International Conference on Computational Engineering Science
Harte, A.M. & McNamara, J.F. (1995) Materials characterisation of overinjected thermoplastic components . In: S.N. Alturi, G. Yagawa & T.A. Cruse eds. International Conference on Computational Engineering Science , pp.1836-1837 [Details]
(1993) 6th European Conference on Composite Materials; European Association for Composite Materials
Harte, A.M. and McNamara, J.F. (1993) Thermal and mechanical analysis of over injected composite components . In: A.R. Bunsell et al eds. 6th European Conference on Composite Materials; European Association for Composite Materials Bordeaux, , pp.39-50 [Details]
(1993) ABAQUS User's Conference
Harte, A.M. and McNamara, J.F. (1993) Thermal and mechanical analysis of over injected composite components ABAQUS User's Conference Aachen, Germany, [Details]
(1992) IMF-8
Harte, A.M. and McNamara, J.F (1992) Numerical Modelling of Heat Transfer during Overinjection of Thermoplastic Composite Materials IMF-8 University College, Dublin, [Details]
(1990) Ninth International Conference on Offshore Mechanics and Arctic Engineering, ASME
Harte, A.M. and McNamara, J.F. (1990) Verification of Analytical Modelling Procedures for the Stress Analysis of Flexible Pipe Cross-Sections Ninth International Conference on Offshore Mechanics and Arctic Engineering, ASME Houston, Texas, , pp.99-103 [Details]
(1989) IDFC-6. The Sixth Irish Materials Forum
McNamara, J.F. and Harte, A.M. (1989) Mechanical Properties of Layered Composite Pipe Sections IDFC-6. The Sixth Irish Materials Forum Trinity College, Dublin, [Details]
(1989) 8th International Conference on Offshore Mechanics and Arctic Engineering, ASME
McNamara J.F. and Harte, A.M. (1989) Three Dimensional Analytical Simulation of Flexible Pipe Wall Structure 8th International Conference on Offshore Mechanics and Arctic Engineering, ASME The Hague, The Netherlands, , 19-MAR-89 - 23-MAR-89 , pp.477-482 [Details]
(1984) 5th International Conference on Finite Elements in Water Resources
Harte, A.M. and McNamara, J.F. (1984) Application of Constraints in Modelling Tidal Power Generation 5th International Conference on Finite Elements in Water Resources University of Vermont, [Details]

Other Journals

  Year Publication
(1982) 'A Computer Simulation of Water Circulation in Galway Bay'
Harte, A.M, Gilroy, J.P. & McNamara, J.F. (1982) 'A Computer Simulation of Water Circulation in Galway Bay' Engineers Journal, 35 (6) :6-7. [Details]

Conference Paper

  Year Publication
(2010) Numerical Modelling of FRP Plate Reinforced Glulam. Proceedings of 11th World Conference on Timber Engineering.
Raftery, G.M. & Harte, A.M. (2010) Numerical Modelling of FRP Plate Reinforced Glulam. Proceedings of 11th World Conference on Timber Engineering. Riva del Garda, Italy: Conference Paper [Details]
(2010) Numerical Modelling of FRP Plate Reinforced Glulam.
Raftery, G. & Harte, A. M. (2010) Numerical Modelling of FRP Plate Reinforced Glulam. Conference Paper [Details]
(2010) A Probabilistic Approach to Non-Linear Simulation of Stress-Strain Relationships for OSB Subjected to In-Plane Tension. Proceedings of 4th International Conference on Advanced Computational Engineering and Experimenting.
McTigue, A. & Harte A.M. (2010) A Probabilistic Approach to Non-Linear Simulation of Stress-Strain Relationships for OSB Subjected to In-Plane Tension. Proceedings of 4th International Conference on Advanced Computational Engineering and Experimenting. Paris, France: Conference Paper [Details]
(2010) A Probabilistic Approach to the Simulation of Non-Linear Stress-Strain Relationships for Oriented Strandboard. Proceedings of Society of Wood Science and Technology (SWST) 53rd International Convention.
McTigue, A. & Harte, A.M. (2010) A Probabilistic Approach to the Simulation of Non-Linear Stress-Strain Relationships for Oriented Strandboard. Proceedings of Society of Wood Science and Technology (SWST) 53rd International Convention. Geneva, Switzerland: Conference Paper [Details]
(2009) Experimental testing of FRP plate reinforced glulam. Proceedings of Advanced Composites in Construction.
Raftery, G.M. & Harte, A.M. (2009) Experimental testing of FRP plate reinforced glulam. Proceedings of Advanced Composites in Construction. Edinburgh, UK: Conference Paper [Details]
(2009) Repair of Glulam using GFRP rods. Proceedings of 11th International Conference on Structural Repair and Maintenance of Heritage Architecture.
Raftery, G.M. & Harte, A.M. (2009) Repair of Glulam using GFRP rods. Proceedings of 11th International Conference on Structural Repair and Maintenance of Heritage Architecture. Tallinn, Estonia: Conference Paper [Details]
(2009) Experimental Testing of FRP Plate Reinforced Glulam.
Raftery, G. & Harte, A. M. (2009) Experimental Testing of FRP Plate Reinforced Glulam. Conference Paper [Details]
(2009) Flexural reinforcement of glue-laminated timber beams using prestressed FRP plates. Proceedings of 4th International Conference on Advanced Composites in Construction.
Brady, J. & Harte, A.M. (2009) Flexural reinforcement of glue-laminated timber beams using prestressed FRP plates. Proceedings of 4th International Conference on Advanced Composites in Construction. Edinburgh, UK: Conference Paper [Details]
(2009) Repair of Glulam using GFRP rods.
Raftery, G. & Harte, A. M. (2009) Repair of Glulam using GFRP rods. Conference Paper [Details]
(2008) Prestressed FRP flexural strengthening of softwood glue-laminated timber beams. Proceedings of 10th World Conference on Timber Engineering.
Brady, J. & Harte, A.M. (2008) Prestressed FRP flexural strengthening of softwood glue-laminated timber beams. Proceedings of 10th World Conference on Timber Engineering. Miyazaki, Japan: Conference Paper [Details]
(2008) Composite Beams of timber and FRP. Proceedings of Joint Symposium on Concrete and Bridge and Infrastructure Research in Ireland.
Harte, A.M. & Brady, J. (2008) Composite Beams of timber and FRP. Proceedings of Joint Symposium on Concrete and Bridge and Infrastructure Research in Ireland. NUI Galway: Conference Paper [Details]
(2007) Hygrothermal Compliance at FRP-Wood Bonded Interfaces. Proceedings of Advanced Composites in Construction.
Raftery, G.M., Harte, A.M. & Rodd, P.D. (2007) Hygrothermal Compliance at FRP-Wood Bonded Interfaces. Proceedings of Advanced Composites in Construction. Bath, UK: Conference Paper [Details]
(2007) Hygrothermal Compliance at FRP-Wood Bonded Interfaces.
Raftery, G., Harte, A. M. and Rodd, P. (2007) Hygrothermal Compliance at FRP-Wood Bonded Interfaces. Conference Paper [Details]
(2006) Durability Assessment of Adhesives and Reinforcement at the GFRP-Wood Interface.
Raftery, G., Harte, A. M. and Rodd, P. (2006) Durability Assessment of Adhesives and Reinforcement at the GFRP-Wood Interface. Conference Paper [Details]
(2006) Performance Evaluation of Adhesives and Reinforcements in GFRP-Wood Connections.
Raftery, G., Harte, A. M. and Rodd, P. (2006) Performance Evaluation of Adhesives and Reinforcements in GFRP-Wood Connections. Conference Paper [Details]
(2006) Durability Assessment of Adhesives and Reinforcement at the FRP-Wood Interface. Proceedings of 3rd International Conference on FRP Composites in Civil Engineering.
Raftery, G.M., Harte, A.M. & Rodd, P.D. (2006) Durability Assessment of Adhesives and Reinforcement at the FRP-Wood Interface. Proceedings of 3rd International Conference on FRP Composites in Civil Engineering. Miami, FL, USA: Conference Paper [Details]
(2006) Performance evaluation of adhesives and reinforcements in GFRP-wood connections. Proceedings of 9th World Conference on Timber Engineering.
Raftery, G.M. & Harte, A.M. (2006) Performance evaluation of adhesives and reinforcements in GFRP-wood connections. Proceedings of 9th World Conference on Timber Engineering. Portland, Oregan, USA: Conference Paper [Details]
(2005) Evaluation of wood adhesives for a glue-laminated softwood. Proceedings of Wood Adhesives 2005 Conference.
Raftery, G.M. & Harte, A.M. (2005) Evaluation of wood adhesives for a glue-laminated softwood. Proceedings of Wood Adhesives 2005 Conference. San Diego, USA: Conference Paper [Details]
(2005) Evaluation of Wood Adhesives for a Glue-laminated Softwood.
Raftery, G. & Harte, A. M. (2005) Evaluation of Wood Adhesives for a Glue-laminated Softwood. Conference Paper [Details]
(2005) Characterisation of the wave environment in the fatigue analysis of flexible risers. Proceedings of 24th International Conference on Offshore Mechanics and Arctic Engineering.
Sheehan, J., Grealish, F., Smith, R. & Harte, A.M. (2005) Characterisation of the wave environment in the fatigue analysis of flexible risers. Proceedings of 24th International Conference on Offshore Mechanics and Arctic Engineering. Halkidiki, Greece: Conference Paper [Details]
(2005) Design optimisation of timber I-joists. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation.
O'Toole, C. & Harte, A.M. (2005) Design optimisation of timber I-joists. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation. UCC, Ireland: Conference Paper [Details]
(2004) REPOTIM: The Development of a Hybrid Fibre Reinforced Polymer Timber Beam Using Irish Grown Sitka Spruce.
Raftery, G. & Harte, A. M. (2004) REPOTIM: The Development of a Hybrid Fibre Reinforced Polymer Timber Beam Using Irish Grown Sitka Spruce. Conference Paper [Details]
(2004) REPOTIM: The Development of a Hybrid Fibre Reinforced Polymer Timber Beam Using Irish Grown Sitka Spruce. Proceedings of Coford Conference on Forest Research and Development in Ireland.
Raftery, G. & Harte, A. M. (2004) REPOTIM: The Development of a Hybrid Fibre Reinforced Polymer Timber Beam Using Irish Grown Sitka Spruce. Proceedings of Coford Conference on Forest Research and Development in Ireland. Tullamore, Ireland: Conference Paper [Details]
(2003) Coupled Temperature-Displacement Model for Predicting the Long-Term Performance of Offshore Pipeline Insulation Systems. Proceedings of International Conference on Advanced Materials and Processing Technologies.
Harte, A.M., Williams, D. & Grealish, F. (2003) Coupled Temperature-Displacement Model for Predicting the Long-Term Performance of Offshore Pipeline Insulation Systems. Proceedings of International Conference on Advanced Materials and Processing Technologies. DCU, Ireland: Conference Paper [Details]
(2003) A Combined Riser Mooring System for Deepwater Applications. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering.
Hogg, B., Harte, A. & Grealish, F. (2003) A Combined Riser Mooring System for Deepwater Applications. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. Cancun, Mexico: Conference Paper [Details]
(2003) Development of Analytical Tool for the Design of Deepwater Riser/Flowline Thermal Insulation Systems. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering.
Williams, D., Harte, A. & Grealish, F. (2003) Development of Analytical Tool for the Design of Deepwater Riser/Flowline Thermal Insulation Systems. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. Cancun, Mexico: Conference Paper [Details]
(2001) Flexural strengthening of RC beams using externally bonded CFRP laminates. Proceedings of 2001 Colloquium on Concrete Research in Ireland.
Harte, A.M., Meade, S. & McKeever, K. (2001) Flexural strengthening of RC beams using externally bonded CFRP laminates. Proceedings of 2001 Colloquium on Concrete Research in Ireland. NUI, Galway, Ireland: Conference Paper [Details]
(2000) Application of Optimisation Methods to the Design of High Performance Composite Pipelines. Proceedings of 3rd International Conference in Pipeline Technology.
Harte, A.M., McNamara, J.F. & Roddy, I. (2000) Application of Optimisation Methods to the Design of High Performance Composite Pipelines. Proceedings of 3rd International Conference in Pipeline Technology. Brugge, Belgium: Conference Paper [Details]
(1999) Optimisation techniques for the design of composite structural components. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation.
Roddy, I., McNamara, J.F. & Harte, A.M. (1999) Optimisation techniques for the design of composite structural components. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation. NUI, Galway, Ireland: Conference Paper [Details]
(1999) Finite element modelling of pultruded beam-column connections. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation.
McCann, D. & Harte, A.M. (1999) Finite element modelling of pultruded beam-column connections. Proceedings of Annual Symposium of Irish Society for Scientific and Engineering Computation. NUI, Galway, Ireland: Conference Paper [Details]
(1999) Evaluation of optimisation techniques in the design of composite pipelines. Proceedings of the International Conference on Advances in Mateirals and Processing Technologies.
Harte, A.M., McNamara, J.F., and Roddy, I. (1999) Evaluation of optimisation techniques in the design of composite pipelines. Proceedings of the International Conference on Advances in Mateirals and Processing Technologies. Dublin City University: Conference Paper [Details]
(1999) Evaluation of optimisation techniques for the design of composite structural components. Proceedings of the International Conference on Integrity, Reliability and Failure, Porto, INEGI-FEUP.
Roddy, I., McNamara, J.F. and Harte, A.M. (1999) Evaluation of optimisation techniques for the design of composite structural components. Proceedings of the International Conference on Integrity, Reliability and Failure, Porto, INEGI-FEUP. University of Porto, Portugal: Conference Paper [Details]
(1998) Shape and thickness optimisation of a composite light rail vehicle body-shell. Proceedings of IMC-15 : Fifteenth Conference of the Irish Manufacturing Committee.
Cunningham, R., O' Sullivan, M., McNamara, J.F. & Harte, A.M. (1998) Shape and thickness optimisation of a composite light rail vehicle body-shell. Proceedings of IMC-15 : Fifteenth Conference of the Irish Manufacturing Committee. Conference Paper [Details]
(1998) Shape and thickness optimisation of a composite light rail vehicle bodyshell. Proceedings of the 15th Conference of the Irish Manufacturing Committee.
Cunningham, R., O'Sullivan, M., McNamara, J.F. & Harte, A.M. (1998) Shape and thickness optimisation of a composite light rail vehicle bodyshell. Proceedings of the 15th Conference of the Irish Manufacturing Committee. Jordanstown, Northern Ireland: Conference Paper [Details]
(1995) Materials characterisation of overinjected thermoplastic components. Proceedings of International Conference on Computational Engineering Science.
Harte, A.M. & McNamara, J.F. (1995) Materials characterisation of overinjected thermoplastic components. Proceedings of International Conference on Computational Engineering Science. Hawaii, USA: Conference Paper [Details]
(1993) Thermal and mechanical analysis of overinjected composite components. Proceedings of 6th European Conference on Composite Materials.
Harte, A.M. & McNamara, J.F. (1993) Thermal and mechanical analysis of overinjected composite components. Proceedings of 6th European Conference on Composite Materials. Bordeaux, France: Conference Paper [Details]
(1993) Thermal and mechanical analysis of overinjected composite components. Proceedings of ABAQUS Users' Conference.
Harte, A.M. & McNamara, J.F. (1993) Thermal and mechanical analysis of overinjected composite components. Proceedings of ABAQUS Users' Conference. Aachen, Germany: Conference Paper [Details]
(1990) Verification of Analytical Modelling procedures for the Stress Analysis og Flexible Pipe cross-sections. Proceedings of 9th International Conference on Offshore Mechanics and Arctic Engineering.
Harte, A.M. & McNamara, J.F. (1990) Verification of Analytical Modelling procedures for the Stress Analysis og Flexible Pipe cross-sections. Proceedings of 9th International Conference on Offshore Mechanics and Arctic Engineering. Houston, Texas, USA: Conference Paper [Details]
(1989) Mechanical properties of layered composite pipe sections. Proceedings of 6th Irish Materials Forum.
McNamara, J.F. & Harte, A.M (1989) Mechanical properties of layered composite pipe sections. Proceedings of 6th Irish Materials Forum. TCD, Ireland: Conference Paper [Details]
(1989) Three-Dimensional Analytical Simulation of Flexible Pipe Wall Structure. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering.
Harte, A.M. & McNamara, J.F. (1989) Three-Dimensional Analytical Simulation of Flexible Pipe Wall Structure. Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. The Hague, Holland: Conference Paper [Details]
(1984) Application of constraints in modelling tidal power generation. Proceedings of 5th International Conference on Finite elements in Water Resources.
Harte, A.M., Gilroy, J.P. & McNamara, J.F. (1984) Application of constraints in modelling tidal power generation. Proceedings of 5th International Conference on Finite elements in Water Resources. Conference Paper [Details]
(1982) A Computer Simulation of Water Circulation in Galway Bay. Proceedings of IEI Seminar, Galway Bay- An Amenity and Natural Resource.
Harte, A.M. & McNamara, J.F. (1982) A Computer Simulation of Water Circulation in Galway Bay. Proceedings of IEI Seminar, Galway Bay- An Amenity and Natural Resource. UCG, Ireland: Conference Paper [Details]

Other Item

  Year Publication
(2000) Application of optimisation methods to the design of high performance composite pipelines. Pipeline Technology.
Harte, A.M., McNamara, J.F. and Roddy, I.D. (2000) Application of optimisation methods to the design of high performance composite pipelines. Pipeline Technology. Other Item [Details]
(1997) Finite element thermomechanical modelling of overinjected thermoplastic composite components. Advances in Computational Engineering Science.
Harte, A.H. & McNamara, J.F. (1997) Finite element thermomechanical modelling of overinjected thermoplastic composite components. Advances in Computational Engineering Science. Other Item [Details]
(1995) Materials characterisation of overinjected thermoplastic composite components. Constitutive Laws - Experiements and Numerical Implementation.
Harte, A.M. & McNamara, J.F. (1995) Materials characterisation of overinjected thermoplastic composite components. Constitutive Laws - Experiements and Numerical Implementation. Other Item [Details]
(1982) A Computer Simulation of Water Circulation in Galway Bay. Institution of Engineers of Ireland Seminar, Galway Bay - An Amenity and Natural Resource.
Harte, A.M., Gilroy, J.P. and McNamara, J.F. (1982) A Computer Simulation of Water Circulation in Galway Bay. Institution of Engineers of Ireland Seminar, Galway Bay - An Amenity and Natural Resource. University College Galway: Other Item [Details]
(1982) A Computer Simulation of Water Circulation in Galway Bay. The Engineers Journal.
Harte, A.M., Gilroy, J.P. and McNamara, J.F. (1982) A Computer Simulation of Water Circulation in Galway Bay. The Engineers Journal. Other Item [Details]

Non Published Reports

  Year Publication
(2011) Engineering the West to 2020 - Reinventing our region.
Dolan, F., Fogarty, P, Harte, A., Madden, M., McHugh, P, Mulligan, B, Mulry, B, O'Donoghue, P, Ryan, H. & Tuohy, J. (2011) Engineering the West to 2020 - Reinventing our region. Non Published Reports [Details]