Prof. Sean Leen

B.Eng.,M.Eng.Sc.,Ph.D.,PGCAP

Contact Details

Professor
Mechanical & Biomedical Eng
ENG-2051
New Engineering Building
NUI Galway

T: Ext. 5955
E: sean.leen@nuigalway.ie
 
researcher

Biography

Peer Reviewed Journals

  Year Publication
(2015) 'High temperature, low cycle fatigue characterisation of MarBN at 600⁰C'
Barrett, RA, O'Hara, E, O'Donoghue, P.E., Leen,SB (2015) 'High temperature, low cycle fatigue characterisation of MarBN at 600⁰C'. Trans Asme, Journal Of Pressure Vessel Technology, [Details]
(2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permability'
Grogan, D. M., Ó Brádaigh, C.M., Leen, S.B. (2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permability'. Composite Structures, 120 :246-261 [Details]
(2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr stents'
Sweeney, CA, O'Brien, B, Dunne, FPE, McHugh, PE, Leen, SB. (2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr stents'. Acta Materialia, 78 :341-353 [Details]
(2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'
O'Hagan, CP, O'Brien, BJ, Leen, SB, Monaghan, RFD. (2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'. Energy & Fuels, 29 :3082-3095 [DOI] [Details]
(2015) 'micro-scale testing and micromechanical modelling for high cycle fatgiue for CoCr stent material'
Sweeney, CA, O'Brien, B, Dunne, FPE, McHugh, PE, Leen, SB. (2015) 'micro-scale testing and micromechanical modelling for high cycle fatgiue for CoCr stent material'. Journal Of Mechanical Behavior Of Biomedical Materials, 46 :244-260 [Details]
(2015) 'Damage and permeability in tape-laid theromplastic composite cryogenic tanks'
Grogan, D.M., Ó Brádaigh, C.M., McGarry, J.P., Leen, S.B. (2015) 'Damage and permeability in tape-laid theromplastic composite cryogenic tanks'. Composites Part A-Applied Science And Manufacturing, 78 :390-402 [Details]
(2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'
O’Hagan CP, O’Brien BJ, Griffin F, Hooper B, Leen SB, Monaghan RFD (2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'. Energy And Fuels, 29 (5):3082-3095 [Details]
(2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permeability'
Grogan, DM,Bradaigh, CMO,Leen, SB (2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permeability'. Composite Structures, 120 :246-261 [DOI] [Details]
(2015) 'Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels'
1) Li, D-F, O’Donoghue, PE, Hyde, CJ, O’Dowd, NP, Leen, SB, (2015) 'Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels'. International Journal Of Fatigue, [Details]
(2015) 'Damage and permeability in tape-laid thermoplastic composite cryogenic tanks'
Grogan, DM,Bradaigh, CMO,McGarry, JP,Leen, SB (2015) 'Damage and permeability in tape-laid thermoplastic composite cryogenic tanks'. Composites Part A-Applied Science And Manufacturing, 78 :390-402 [DOI] [Details]
(2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'
Barrett, RA, O’Donoghue, PE, Leen, SB (2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'. Computational Materials Science, 92 :286-297 [DOI] [Details]
(2015) 'Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing'
O'Hagan, CP,O'Brien, BJ,Griffin, F,Hooper, B,Leen, SB,Monaghan, RFD (2015) 'Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing'. Energy & Fuels, 29 :3082-3095 [DOI] [Details]
(2015) 'Finite element based damage assessment of composite tidal turbine blades'
Fagan, EM; Leen, SB; Kennedy, CR; Goggins, J (2015) 'Finite element based damage assessment of composite tidal turbine blades'. Journal Of Physics; Conference Series, 628 ((2015) 012106) [DOI] [Details]
(2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'
Barrett, RA, O’Donoghue, PE, Leen, SB (2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'. Journal Of Pressure Vessel Technology, [Details]
(2015) 'Modelling of fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM, Harte, AM, Leen, SB (2015) 'Modelling of fretting in the pressure armour layer of flexible marine risers'. Tribology International, [Details]
(2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'. International Journal Of Fatigue, 62 :180-193 [DOI] [Details]
(2014) 'A multi-axial cyclic viscoplasticity model for high temperature fatigue of P91 steel'
Barrett, RA, T.P. Farragher, N.P. O’Dowd, O’Donoghue, PE, Leen, SB (2014) 'A multi-axial cyclic viscoplasticity model for high temperature fatigue of P91 steel'. Materials Science And Technology, 30 :67-74 [DOI] [Details]
(2014) 'A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel'
Barrett, RA, T.P. Farragher, C.J. Hyde, N.P. O’Dowd, O’Donoghue, PE, Leen, SB (2014) 'A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel'. Journal Of Pressure Vessel Technology, 136 (021402) [DOI] [Details]
(2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'. Tribology International, 76 :100-115 [DOI] [Details]
(2014) 'Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates'
Grogan, DM,Leen, SB,Semprimoschnig, COA,Bradaigh, CMO (2014) 'Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates'. Composites Part A-Applied Science And Manufacturing, 66 :237-250 [DOI] [Details]
(2014) 'High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material'
1) T.P. Farragher, S. Scully, N.P. O'Dowd, C.J. Hyde, S.B. Leen (2014) 'High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material'. Journal Of Pressure Vessel Technology, 136 (021403) [DOI] [Details]
(2014) 'Cyclic viscoplasticity testing and modelling of a service-aged P91 steel'
Hyde, CJ, Sun, W, Hyde, TH, Rousse, JP, Farragher, T, O’Dowd, N.P., Leen, SB, (2014) 'Cyclic viscoplasticity testing and modelling of a service-aged P91 steel'. Journal Of Pressure Vessel Technology, 136 (044501) [DOI] [Details]
(2014) 'A physical corrosion model for bioabsorbable metal stents'
Grogan, JA,Leen, SB,McHugh, PE (2014) 'A physical corrosion model for bioabsorbable metal stents'. Acta Biomaterialia, 10 :2313-2322 [DOI] [Details]
(2014) 'An XFEM-Based Methodology for Fatigue Delamination and Permeability in Composites'
Grogan, D.M., Leen, S.B. and Ó Brádaigh, C.M., (2014) 'An XFEM-Based Methodology for Fatigue Delamination and Permeability in Composites'. Composite Structures, 107 :205-218 [Details]
(2014) 'Micro-macro wear-fatigue of modular hip implant taper lock coupling'
Zhang, T., Harrison, N.M., McDonnell, P.F., McHugh, P.E., Leen, S.B. (2014) 'Micro-macro wear-fatigue of modular hip implant taper lock coupling'. Journal Of Strain Analysis For Engineering Design, 49 (1):2-18 [Details]
(2014) 'Computational micromechanics of bioabsorbable magnesium stents'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2014) 'Computational micromechanics of bioabsorbable magnesium stents'. Journal Of Mechanical Behaviour Of Biomedical Materials, 34 :93-105 [Details]
(2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'
Sweeney, C.A., O'Brien, B., McHugh, P.E., Leen, S.B. (2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'. Biomaterials, 35 :36-48 [Details]
(2014) 'Void Distributions and Permeability Prediction for Rotationally Moulded Polymers'
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M (2014) 'Void Distributions and Permeability Prediction for Rotationally Moulded Polymers'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, [Details]
(2014) 'Process modelling and optimization of keyhole plasma arc welding of thin Ti-6Al-4V'
Sun, W,Mohammed, MB,Xu, L,Hyde, TH,McCartney, DG,Leen, SB (2014) 'Process modelling and optimization of keyhole plasma arc welding of thin Ti-6Al-4V'. Journal Of Strain Analysis For Engineering Design, 49 :410-420 [DOI] [Details]
(2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr alloy'
Sweeney, C.A., O'Brien, B. Dunne, F.P.E., McHugh, P.E. Leen, S.B. (2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr alloy'. Acta Materialia, 78 :341-353 [Details]
(2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'. Biomaterials, 34 (33):8049-8060 [Details]
(2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'
Sweeney, CA,Vorster, W,Leen, SB,Sakurada, E,McHugh, PE,Dunne, FPE (2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'. Journal Of The Mechanics And Physics Of Solids, 61 :1224-1240 [DOI] [Details]
(2013) 'Thermomechanical analysis of a pressurized plain pipe under realistic plant conditions'
Farragher, TP, O’Dowd, NP, Scully, S, Leen, SB (2013) 'Thermomechanical analysis of a pressurized plain pipe under realistic plant conditions'. Journal Of Pressure Vessel Technology, 135 (011204) [DOI] [Details]
(2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'
Mohd Tobi, A, Shipway, PH, Leen, SB (2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'. Tribology International, 58 [Details]
(2013) 'New strategy for the prediction of the gas pressure profile of superplastic forming of Al-5083 aluminium alloy'
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2013) 'New strategy for the prediction of the gas pressure profile of superplastic forming of Al-5083 aluminium alloy'. Materials Science Forum, 735 :204-209 [DOI] [Details]
(2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'
Farragher, TP, Scully, S, O’Dowd, NP, Leen, SB (2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'. International Journal Of Fatigue, 49 :50-61 [DOI] [Details]
(2013) 'A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites'
Kennedy, C.R., Ó Brádaigh, C.M and Leen, S.B. (2013) 'A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites'. Composite Structures, 106 :201-210 [ARAN Link] [Details]
(2013) 'The influence of statistical size effects on the plastic deformation of coronary stents'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2013) 'The influence of statistical size effects on the plastic deformation of coronary stents'. Journal Of Mechanical Behaviour Of Biomedical Materials, 20 :61-76 [Details]
(2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'
Zhang, T., Harrison, N.M., McDonnell, P.F., McHugh, P.E., Leen, S.B. (2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'. Tribology International, 65 :113-127 [Details]
(2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'
Sweeney, C.A., Vorster, W., Leen, S.B., McHugh, P.E., Dunne, F.P.E. (2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'. Journal Of The Mechanics And Physics Of Solids, 61 :1224-1240 [Details]
(2013) 'Design of Composite Tidal Turbine Blades'
Grogan, D.M., Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) 'Design of Composite Tidal Turbine Blades'. Renewable Energy, 57 :151-162 [Details]
(2013) 'An improved unified viscoplastic model for strain-rate sensitivity in high temperature fatigue'
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) 'An improved unified viscoplastic model for strain-rate sensitivity in high temperature fatigue'. International Journal Of Fatigue, 48 :192-204 [DOI] [Details]
(2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'. Wear, 305 :100-114 [DOI] [Details]
(2013) 'Finite element simulation of fretting wear and fatigue in thin steel wires'
Cruzado, A., Leen, S.B., Urchegui, M.A., Gómez, X (2013) 'Finite element simulation of fretting wear and fatigue in thin steel wires'. International Journal Of Fatigue, [DOI] [Details]
(2012) 'Comparison study of two constitutive equations for Al-5083 aluminium alloy'
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2012) 'Comparison study of two constitutive equations for Al-5083 aluminium alloy'. Materialwissenschaft Und Werkstofftechnik (Materials Science And Engineering Technology), 43 (9):780-785 [DOI] [Details]
(2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'
Zhang, T., McHugh, P.E., Leen, S.B. (2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'. International Journal Of Fatigue, 44 :260-272 [Details]
(2012) 'Micromechanical methodology for fatigue in cardiovascular stents'
Sweeney, C.A., McHugh, P.E., McGarry, J.P., Leen, S.B. (2012) 'Micromechanical methodology for fatigue in cardiovascular stents'. International Journal Of Fatigue, 44 :202-216 [Details]
(2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'
Kennedy, CR,Leen, SB,Bradaigh, CMO (2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 226 :203-218 [DOI] [Details]
(2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'
Grogan, JA,Leen, SB,McHugh, PE (2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'. Journal Of The Mechanical Behavior Of Biomedical Materials, 12 :129-138 [DOI] [Details]
(2011) 'A corrosion model for bioabsorbable metallic stents'
Grogan, JA,O'Brien, BJ,Leen, SB,McHugh, PE (2011) 'A corrosion model for bioabsorbable metallic stents'. Acta Biomaterialia, 7 :3523-3533 [DOI] [Details]
(2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'
McCarthy, O.J., McGarry, J.P., Leen, S.B. (2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'. Computational Materials Science, 50 (8):2439-2458 [Details]
(2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'
Ding, J, Houghton, D, Williams, EJ, Leen, SB (2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'. International Journal of Fatigue, 33 :332-342 [DOI] [Details]
(2011) 'Computational study on the effect of contact geometry on fretting behaviour'
Zhang, T, McHugh, P.E., Leen, S.B. (2011) 'Computational study on the effect of contact geometry on fretting behaviour'. Wear, [Details]
(2011) 'Gross slip wear performance of a layered thin W-DLC coating: damage mechanisms and life modelling'
Mohd Tobi, A, Shipway, PH, Leen, SB (2011) 'Gross slip wear performance of a layered thin W-DLC coating: damage mechanisms and life modelling'. Wear, [Details]
(2011) 'Gross slip fretting wear performance of a layered thin W-DLC coating: Damage mechanisms and life modelling'
Tobi, ALM,Shipway, PH,Leen, SB (2011) 'Gross slip fretting wear performance of a layered thin W-DLC coating: Damage mechanisms and life modelling'. Wear, 271 :1572-1584 [DOI] [Details]
(2010) 'Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies'
Leen, S.B., Deshpande, A., Hyde, T.H. (2010) 'Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies'. Key Engineering Materials, 433 :247-256 [DOI] [Details]
(2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'
Bennett, CJ,Leen, SB,Shipway, PH (2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'. Int J Mater Form, 3 :1155-1158 [DOI] [Details]
(2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'
Davis, T., Ding, J., Sun, W. and Leen, S.B (2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'. Proceedings Of The Institution Of Mechanical Engineers, Part L: Journal Of Materials Design & Applications, 224 :41-50 [DOI] [Details]
(2010) 'The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems'
A. L. Mohd Tobi, J. Ding, S Pearson, S. B. Leen, P. H. Shipway (2010) 'The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems'. Tribology International, 43 :1917-1932 [DOI] [Details]
(2010) 'Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy'
Deshpande, A, Leen, SB, Hyde, TH (2010) 'Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy'. ASME J Manufacturing Science and Engineering, (132) [DOI] [Details]
(2010) 'Cyclic thermo-mechanical material modelling and testing of 316 stainless steel'
Hyde, CJ,Sun, W,Leen, SB (2010) 'Cyclic thermo-mechanical material modelling and testing of 316 stainless steel'. International Journal Of Pressure Vessels And Piping, 87 :365-372 [DOI] [Details]
(2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'
Deshpande, AA,Leen, SB,Hyde, TH (2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'. Journal Of Materials Engineering And Performance, 19 :452-466 [DOI] [Details]
(2010) 'A holistic approach on structural integrity of high temperature welds in power plants'
Hyde, TH, Sun, W, Becker, AA, Leen, SB, Shipway, PH, Thomson, RC, Yaghi, AH, Sanchez-Hanton, J (2010) 'A holistic approach on structural integrity of high temperature welds in power plants'. Energy Materials, 4 (1):17-22 [DOI] [Details]
(2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'
Bennett, CJ,Leen, SB,Williams, EJ,Shipway, PH,Hyde, TH (2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'. Computational Materials Science, 50 :125-137 [DOI] [Details]
(2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'
Deshpande, AA,Leen, SB,Sun, W,Hyde, TH (2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'. Int J Mater Form, 3 :1151-1154 [DOI] [Details]
(2010) 'A three-dimensional numerical study of fatigue crack growth using remeshing techniques'
Maligno, A.R. Rajaratnam, S, Leen, S.B., Williams, E.J. (2010) 'A three-dimensional numerical study of fatigue crack growth using remeshing techniques'. Engng Fract Mechs, 77 :94-111 [DOI] [Details]
(2009) 'An multi-scale model for fretting wear with oxidation-debris effects'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'An multi-scale model for fretting wear with oxidation-debris effects'. Proc Instn Mech. Engrs, Part J: J. Engineering Tribology, 223 (7):1019-1031 [Details]
(2009) 'An anisotropic creep damage model for anisotropic weld metal'
Peravali, S., Hyde, T. H., Cliffe, K. A. and Leen, S. B. (2009) 'An anisotropic creep damage model for anisotropic weld metal'. Trans Asme, Journal Of Pressure Vessel Technology, [Details]
(2009) 'A fretting fatigue test for spline coupling contact'
Wavish, P. M., Houghton, D., Ding, K., Leen, S. B., McColl, I. R. & Williams, E. J. (2009) 'A fretting fatigue test for spline coupling contact'. Fatigue & Fracture of Engineering Materials & Structures, [Details]
(2009) 'A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V'
Mohd Tobi, L., Ding, J., Bandak, G., Leen, S. B. & Shipway, P. H. (2009) 'A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V'. Wear, 267 :270-282 [Details]
(2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'
Hyde, TH,Sun, W,Yaghi, AH,Leen, SB (2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :926-935 [DOI] [Details]
(2009) 'A multiaxial fretting fatigue test for spline coupling contact'
Wavish, PM,Houghton, D,Ding, J,Leen, SB,Williams, EJ,McColl, IR (2009) 'A multiaxial fretting fatigue test for spline coupling contact'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :325-345 [DOI] [Details]
(2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'
Leen, SB,Stoyanov, M (2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'. Int J Mater Form, 2 :287-290 [DOI] [Details]
(2009) 'Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V'
Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V'. Tribology International, 42 :1651-1662 [Details]
(2009) 'Multiaxial fretting fatigue testing and prediction for splined couplings'
Houghton, D., Wavish, P. M., Williams, E. J. & Leen, S. B. (2009) 'Multiaxial fretting fatigue testing and prediction for splined couplings'. International Journal of Fatigue, [Details]
(2009) 'Characterisation of fretting-induced wear debris for Ti-6Al-4V'
Everitt, N., Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'Characterisation of fretting-induced wear debris for Ti-6Al-4V'. Wear, 267 :283-291 [Details]
(2008) 'Finite element based predictions for life-limiting behaviour for large SPF tools'
Deshpande, A., Leen, S. B. & Hyde, T. H. (2008) 'Finite element based predictions for life-limiting behaviour for large SPF tools'. Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), 39 (04-May):309-316 [Details]
(2008) 'A methodology for modelling the effects of nitriding on fatigue life'
Hyde, T. R., Leen, S. B. & McColl, I. R. (2008) 'A methodology for modelling the effects of nitriding on fatigue life'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 222 (L1):1-14 [Details]
(2008) 'Finite element simulation of fretting wear-fatigue interaction in spline couplings'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) 'Finite element simulation of fretting wear-fatigue interaction in spline couplings'. Tribology, 2 (1):10-24 [Details]
(2008) 'A combined wear and crack nucleation-propagation methodology for fretting fatigue life prediction'
Madge, J. J., Leen, S. B. & Shipway, P. H. (2008) 'A combined wear and crack nucleation-propagation methodology for fretting fatigue life prediction'. International Journal of Fatigue, 30 :1509-1528 [Details]
(2008) 'Failure prediction for titanium alloys using a superplastic forming limit diagram'
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2008) 'Failure prediction for titanium alloys using a superplastic forming limit diagram'. Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), 39 (04-May):327-331 [Details]
(2008) 'An oxidation-debris model for fretting wear simulation'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) 'An oxidation-debris model for fretting wear simulation'. Proc Instn Mech. Engrs, Part J: J. Engineering Tribology, [Details]
(2008) 'Development and use of an anisotropic damage model for the high-temperature life assessment of a P91 weldment'
Peravali, S., Hyde, T. H., Cliffe, K. A. and Leen, S. B. (2008) 'Development and use of an anisotropic damage model for the high-temperature life assessment of a P91 weldment'. Journal of Strain Analysis, 43 (5):361-382 [Details]
(2007) 'Residual stresses in HVOF sprayed coatings - modelling the effect of spray parameters'
Bansal, P., Shipway, P. & Leen, S. B. (2007) 'Residual stresses in HVOF sprayed coatings - modelling the effect of spray parameters'. Acta Materialia, 55 :5089-5101 [Details]
(2007) 'The application of fretting wear modelling to a spline coupling'
Ding, J, McColl, I.R., Leen, S.B (2007) 'The application of fretting wear modelling to a spline coupling'. Wear, 262 :1205-1216 [Details]
(2007) 'A superplastic forming limit diagram concept for Ti-6Al-4V'
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2007) 'A superplastic forming limit diagram concept for Ti-6Al-4V'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L4):251-264 [Details]
(2007) 'Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude'
Madge, J. J, McColl, I. R. & Leen, S. B. (2007) 'Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude'. Wear, 262 :1159-1170 [Details]
(2007) '“The critical role of fretting wear in the analysis of fretting fatigue'
Madge, JJ, Leen, SB, Shipway, PH (2007) '“The critical role of fretting wear in the analysis of fretting fatigue'. Wear, 263 :542-551 [Details]
(2007) 'A finite element based approach to simulating the effects of debris on fretting wear'
Ding, J., McColl, I. R. & Leen, S. B. (2007) 'A finite element based approach to simulating the effects of debris on fretting wear'. Wear, 263 :481-491 [Details]
(2007) 'A hybrid implicit-explicit FE methodology for coating formation in the high velocity oxy-fuel spraying process'
Bansal, P., Shipway, P. H. & Leen, S. B. (2007) 'A hybrid implicit-explicit FE methodology for coating formation in the high velocity oxy-fuel spraying process'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L4):285-298 [Details]
(2007) 'Application of notch strain techniques to elastic-plastic and elastic-plastic-creep behaviour of complex structures'
Sabesan, R., Leen, S. B. & Hyde, T. H. (2007) 'Application of notch strain techniques to elastic-plastic and elastic-plastic-creep behaviour of complex structures'. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 221 :235-252 [Details]
(2007) 'The effect of weld metal anisotropy on the creep of a pressurized, circumferentially welded pipe'
Hyde, T. H., Peravali, S. & Leen, S. B. (2007) 'The effect of weld metal anisotropy on the creep of a pressurized, circumferentially welded pipe'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L2):77-92 [Details]
(2007) 'Fretting fatigue predictions in a complex coupling'
Ding, J., Sum, W., Rajaratnam, S., Leen, S. B., McColl, I. R. & Williams, E. J. (2007) 'Fretting fatigue predictions in a complex coupling'. International Journal of Fatigue, 29 :1229-1244 [Details]
(2007) 'Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings'
Houghton, D., Wavish, P. M., Leen, S. B. & Williams, E. J. (2007) 'Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings'. Applied Mechanics and Materials, 7-8 :37-42 [Details]
(2006) 'Experimental validation of FE predicted fracture behaviour of thermally sprayed coatings'
Bansal, P, Shipway, P, Leen, SB, Driver, LC (2006) 'Experimental validation of FE predicted fracture behaviour of thermally sprayed coatings'. Materials Science And Engineering, 430 :104-112 [Details]
(2006) 'Effect of particle impact on residual stress development in HVOF sprayed coatings'
Bansal, P., Shipway, P. & Leen, S. B. (2006) 'Effect of particle impact on residual stress development in HVOF sprayed coatings'. Journal of Thermal Spray Technology, 15 (4):570-575 [Details]
(2006) 'Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis'
Pan, W., Leen, S. B. & Hyde, T. H. (2006) 'Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis'. Computers & Structures, 84 :690-698 [Details]
(2006) 'Finite element modelling of the fracture behaviour of brittle coatings'
Bansal, P., Shipway, P. H. & Leen, S. B. (2006) 'Finite element modelling of the fracture behaviour of brittle coatings'. Surface & Coatings Technology, 200 :5318-5327 [Details]
(2006) 'A finite element based methodology for predicting the thermo-mechanical behaviour of superplastic forming tools'
Shang, J., Leen, S. B. & Hyde, T. H. (2006) 'A finite element based methodology for predicting the thermo-mechanical behaviour of superplastic forming tools'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 220 (L3):113-115 [Details]
(2006) 'Finite element based life prediction for high temperature cyclic loading of a large superplastic forming die'
Shang, J., Hyde, T.H., Leen, S.B (2006) 'Finite element based life prediction for high temperature cyclic loading of a large superplastic forming die'. Journal Of Strain Analysis, 401 (8):539-559 [Details]
(2006) 'Towards the modelling of fretting wear and fatigue interaction in spline couplings'
Ding, K, Madge, JJ, Leen, SB, Williams, EJ (2006) 'Towards the modelling of fretting wear and fatigue interaction in spline couplings'. Applied Mechanics And Materials, 5-6 :165-172 [Details]
(2005) 'Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units'
1) Leen, SB, Hyde, TH, Rajaratnam, S and Pan, W (2005) 'Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units'. Key Engineering Materials, 293-294 :261-268 [Details]
(2005) 'Finite element, critical-plane fatigue life prediction of simple and complex contact configurations'
Sum,W. S., Williams, E. J. & Leen, S. B. (2005) 'Finite element, critical-plane fatigue life prediction of simple and complex contact configurations'. International Journal of Fatigue, 27 :403-416 [Details]
(2005) 'A sigmoidal model for superplastic deformation'
Pan, W., Krohn, M., Leen, S. B., Hyde, T. H. & Walloe, S. (2005) 'A sigmoidal model for superplastic deformation'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L3):149-162 [Details]
(2005) 'Approximate prediction methods for multiaxial notch stresses and strains under elastic-plastic and creep conditions'
Hyde, T. H., Sabesan, R. & Leen, S. B. (2005) 'Approximate prediction methods for multiaxial notch stresses and strains under elastic-plastic and creep conditions'. Journal of Strain Analysis, 40 (6):535-548 [Details]
(2005) 'Efficient finite element modelling for complex shaft couplings under non-symmetric loading'
Sum, W., Leen, S. B., Williams, E. J., Rajaratnam, S. & McColl, I. R. (2005) 'Efficient finite element modelling for complex shaft couplings under non-symmetric loading'. Journal of Strain Analysis, 40 (7):655-673 [Details]
(2005) 'Parametric analysis of stresses in welded branched pipes under creep conditions'
Rayner, G., Hyde, T. H., Leen, S. B. & Sun, W. (2005) 'Parametric analysis of stresses in welded branched pipes under creep conditions'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L4):231-248 [Details]
(2005) 'Anisotropic creep behaviour of Bridgman notch specimens'
Hyde, T. H., Jones, I. A., Peravali, S., Sun, W., Wang, J. G. & Leen, S. B. (2005) 'Anisotropic creep behaviour of Bridgman notch specimens'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L3):163-175 [Details]
(2005) 'A simplified fretting test methodology for complex shaft couplings'
Hyde, T. R., Leen, S. B. & McColl, I. R. (2005) 'A simplified fretting test methodology for complex shaft couplings'. Fatigue & Fracture of Engineering Materials & Structures, 28 :1047-1067 [Details]
(2005) 'Design of a multi-axial test specimen for fretting fatigue in splined couplings'
Wavish, P., McColl, I. R. & Leen, S. B. (2005) 'Design of a multi-axial test specimen for fretting fatigue in splined couplings'. Applied Mechanics and Materials, 40636 :267-272 [Details]
(2004) 'Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling'
Ratsimba, C. H. H., McColl, I. R., Williams, E. J., Leen, S. B. & Soh, H. (2004) 'Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling'. Wear, 257 :1193-1206 [Details]
(2004) 'The effect of slip regime on fretting wear-induced stress evolution'
Ding, K., Leen, S.B. and McColl, I.R. (2004) 'The effect of slip regime on fretting wear-induced stress evolution'. International Journal Of Fatigue, [Details]
(2004) 'Finite element simulation and experimental validation of fretting wear'
McColl, I. R., Ding, K. & Leen, S. B. (2004) 'Finite element simulation and experimental validation of fretting wear'. Wear, 256 (11-Dec):1114-1127 [Details]
(2004) 'The measurement of friction for superplastic forming of Ti-6Al-4V'
Kelly, R.B., Leen, S.B., Pashby, I.R, Kennedy, A.R., (2004) 'The measurement of friction for superplastic forming of Ti-6Al-4V'. Materials Science Forum, 447-448 :111-116 [Details]
(2004) 'Approximate prediction methods for notch stresses and strains under elastic-plastic and creep conditions'
Hyde, T. H., Rajaratnam, S. & Leen, S. B. (2004) 'Approximate prediction methods for notch stresses and strains under elastic-plastic and creep conditions'. Journal of Strain Analysis, 39 (5):515-527 [Details]
(2003) 'Fatigue life prediction for a barrelled splined coupling under torque overload'
Leen, S. B., Ratsimba, C. H. H., McColl, I. R. and Williams, E. J. (2003) 'Fatigue life prediction for a barrelled splined coupling under torque overload'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 217 (G3):123-142 [Details]
(2003) 'Parametric study on the frictional contact behaviour between spline teeth'
Sum, W. S., Leen, S. B. & Williams, E. J. (2003) 'Parametric study on the frictional contact behaviour between spline teeth'. Materials Science Forum, 440-441 :69-76 [Details]
(2003) 'Simplified method to predict elastic-plastic behaviour of aeroengine casings'
Sabesan, R., Leen, S. B., Hyde, T. H. (2003) 'Simplified method to predict elastic-plastic behaviour of aeroengine casings'. Key Engineering Materials, Vols. 245-246 :373-380 [Details]
(2002) 'An investigation of the fatigue and fretting performance of a representative aeroengine splined coupling'
Leen, S. B., Hyde, T. H., Ratsimba, C. H. H., Williams, E. J. and McColl, I. R. (2002) 'An investigation of the fatigue and fretting performance of a representative aeroengine splined coupling'. Journal of Strain Analysis, Special Issue: Fretting Fatigue, 37 (6):565-583 [Details]
(2001) 'Macroscopic fretting variables in a splined coupling under combined torque and axial load'
Leen, S. B., Richardson, I. J., McColl, I. R., Williams, E. J. and Hyde, T. R. (2001) 'Macroscopic fretting variables in a splined coupling under combined torque and axial load'. Journal of Strain Analysis, 36 (5):481-499 [Details]
(2000) 'Development of a representative test specimen for frictional contact in splined joint couplings'
Leen, S. B., Hyde, T. R., Williams, E. J., Becker, A. A., McColl, I. R., Hyde, T. H. and Taylor, J. W. (2000) 'Development of a representative test specimen for frictional contact in splined joint couplings'. Journal of Strain Analysis, 35 (6):521-544 [Details]
(2000) 'On the prediction of elastic-plastic generalised load-displacement responses for tubular joints'
Leen, S. B. and Hyde, T. H. (2000) 'On the prediction of elastic-plastic generalised load-displacement responses for tubular joints'. Journal of Strain Analysis, 35 (3):205-220 [Details]
(1999) 'An experimental and finite element study on the non-linear force-displacement characteristics of tubular YT-joints under combined axial loading'
Leen, S. B. and Hyde, T. H. (1999) 'An experimental and finite element study on the non-linear force-displacement characteristics of tubular YT-joints under combined axial loading'. Journal of Strain Analysis, 34 (3):183-207 [Details]
(1999) 'Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes'
Leen, S. B. and Hyde, T. H. (1999) 'Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes'. Journal of International Association for Shell & Spatial Structures, 40 (1):43-55 [Details]
(1997) 'Prediction of elastic-plastic displacements of tubular joints using an energy-based approach'
Leen, S. B. and Hyde, T. H. (1997) 'Prediction of elastic-plastic displacements of tubular joints using an energy-based approach'. Journal of Strain Analysis, 32 (6):435-454 [Details]

Book Chapters

  Year Publication
(2013) 'Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel'
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) 'Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel' In: Advanced Materials Modelling for Structures. Berlin Heidelberg: Springer-Verlag. [DOI] [Details]
(2011) 'Analysis of instability during superplastic deformation'
Leen, S B (2011) 'Analysis of instability during superplastic deformation' In: Superplastic Forming in Advanced Metallic Materials : methods and applications. Cambridge, UK: Woodhead Publishing Ltd. [Details]

Conference Publications

  Year Publication
BioEngineering in Ireland
Grogan, J, O'Brien, B, Leen, S.B., McHugh, P.E., Computational and experimental analysis of the physical performance of biodegradable metallic stents BioEngineering in Ireland [Details]
(2013) Durability of Fibre Reinforced Polymer Composite Materials
Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) Fatigue Life of Immersed Glass Reinforced Polymer Composites Durability of Fibre Reinforced Polymer Composite Materials National Composites Centre, Bristol, UK, [Details]
(2012) Irish Manufacturing Conference, IMC-29
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M. (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks Irish Manufacturing Conference, IMC-29 Belfast, Northern Ireland, [Details]
(2012) IUTAM Symposium Advanced Materials Modelling for Structures
Barrett, RA, O’Donoghue, PE, Leen, SB (2012) Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel . In: Serge Kruch eds. IUTAM Symposium Advanced Materials Modelling for Structures [Details]
(2012) Proceedings of the Irish Manufacturing Conference, IMC-29
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks Proceedings of the Irish Manufacturing Conference, IMC-29 [Details]
(2012) 4th International Conference on Ocean Energy
Hartnett, M; Nash, S; Quinlan, N; Bruzzi, M; Goggins, J; O'Brádaigh, C; Leen, S (2012) Ocean energy numerical modelling and experimental testing facilities at the National University of Ireland, Galway 4th International Conference on Ocean Energy [Details]
(2012) 12th International Conference on Materials in a Space Environment
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. and Ó Brádaigh, C.M, (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels in Cryogenic Fuel Storage Applications 12th International Conference on Materials in a Space Environment Noordwijk, The Netherlands, [Details]
(2012) 12th International Conference on Materials in a Space Environment
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. and Ó Brádaigh, C.M (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels in Cryogenic Fuel Storage Applications . In: rotaional moulding eds. 12th International Conference on Materials in a Space Environment Noordwijk, The Netherlands, [Details]
(2011) ASME PVP-2011
Farragher, TP, O'Dowd, NP, Scully, S, Leen, SB (2011) Thermomechanical analysis of a pressurised plain pipe under realistic plant conditions ASME PVP-2011 Baltimore, Maryland, USA, , 17-JUL-11 - 21-JUL-11 [Details]
(2011) ESAFORM
Otegi, N,. Glados, L., Hurtado, I., Leen, S.B., (2011) Analysis of the capabilities of a hyperbolic constitutive equation for Al-5083 superplastic aluminium alloy ESAFORM Belfast, [Details]
(2011) OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering
Kennedy, C, Leen, S.B., O'Bradaigh, C.M. (2011) A study on the effect of seawater on the fatigue life of polymer composites for tidal turbines OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering Rotterdam, The Netherlands, , 19-JUN-11 - 24-JUN-11 [Details]
(2011) OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering
Josse, T., Billet, A, Leen, S.B., (2011) Prediction of supply vessel motion during transfer to an offshore wind turbine structure OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering Rotterdam, The Netherlands, , 19-JUN-11 - 24-JUN-11 [Details]
(2010) EuroSPF
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2010) Comparison study of two constitutive equations for Al-5083 aluminium alloy EuroSPF Donostia-San Sebastián, Euskadi, Spain, , 08-SEP-10 - 10-SEP-10 [Details]
(2010) SUPERPLASTICITY IN ADVANCED MATERIALS
LEEN, SB et al. (2010) Finite element modelling and experimental testing of thermomechanical behaviour and failure of titanium superplastic forming dies SUPERPLASTICITY IN ADVANCED MATERIALS , pp.247-256 [Details]
(2010) ESAFORM
Bennett, CJ, Leen, SB, Shipway, PH, (2010) A finite element analysis of errors in axisymmetric isothermal and Gleeble compression testing of Ti-6Al-4V ESAFORM Brescia, Italy, , 07-APR-10 - 09-APR-10 [Details]
(2010) ESAFORM 2010
A A Deshpande, S B Leen, W Sun, T H Hyde, (2010) Thermo-mechanical analysis and lifing of Ni-Cr SPF tool ESAFORM 2010 Brescia, Italy, , 07-APR-10 - 09-APR-10 [Details]
(2009) Leeds-Lyon Symposium on Tribology
A. L. Mohd Tobi, J. Ding, S Pearson, S. B. Leen, P. H. Shipway, (2009) The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems Leeds-Lyon Symposium on Tribology Lyon, [Details]
(2009) A holistic approach on structural integrity of high temperature welds in power plants
Hyde, T. H., Sun, W., Becker, A. A., Leen, S. B., Shipway, P. H., Thomson, R. C., Yaghi, A. H., Sanchez-Hanton, J. (2009) A holistic approach on structural integrity of high temperature welds in power plants A holistic approach on structural integrity of high temperature welds in power plants , 06-APR-09 - 07-APR-09 [Details]
(2009) Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy
Deshpande, A., Leen, S. B. & Hyde, T. H. (2009) Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy , 26-JUL-09 - 30-JUL-09 [Details]
(2009) ICSAM
Leen, S.B., Deshpande, A., Hyde, T.H., (2009) Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies ICSAM Seattle, Washington, US, , 29-JUN-09 - 02-JUL-09 [Details]
(2009) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel
Hyde, C. J., Sun, W., Leen, S. B. (2009) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel Cyclic thermo-mechanical material modelling and testing of 316 stainless steel , 21-APR-09 - 23-APR-09 [Details]
(2009) Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation
Everitt, N., Ding, J., Bandak, G., Leen, S. B., Williams, J. & Shipway, P. H. (2009) Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation , 19-APR-09 - 22-APR-09 [Details]
(2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V
Mohd Tobi, A. L., Ding, J., Bandak, G., Leen, S. B. & Shipway, P. H. (2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V , 19-APR-09 - 22-APR-09 [Details]
(2009) Finite element modelling of damage in superplastic forming of a titanium alloy
Leen, S. B. & Stoyanov, M. (2009) Finite element modelling of damage in superplastic forming of a titanium alloy Finite element modelling of damage in superplastic forming of a titanium alloy , 27-APR-09 - 29-APR-09 [Details]
(2009) A multi-scale model for fretting wear with oxidation-debris effects
Ding, J,Leen, SB,Williams, EJ,Shipway, PH (2009) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY A multi-scale model for fretting wear with oxidation-debris effects , pp.1019-1031 [DOI] [Details]
(2009) Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V
Ding, J,Bandak, G,Leen, SB,Williams, EJ,Shipway, PH (2009) TRIBOLOGY INTERNATIONAL Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V , pp.1651-1662 [DOI] [Details]
(2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V
Tobi, ALM,Ding, J,Bandak, G,Leen, SB,Shipway, PH (2009) WEAR A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V , pp.270-282 [DOI] [Details]
(2009) Characterisation of fretting-induced wear debris for Ti-6Al-4 V
Everitt, NM,Ding, J,Bandak, G,Shipway, PH,Leen, SB,Williams, EJ (2009) WEAR Characterisation of fretting-induced wear debris for Ti-6Al-4 V , pp.283-291 [DOI] [Details]
(2008) Multiaxial fretting fatigue testing and prediction for splined couplings
Houghton, D., Wavish, P. M., Williams, E. J. & Leen, S. B. (2008) Multiaxial fretting fatigue testing and prediction for splined couplings Multiaxial fretting fatigue testing and prediction for splined couplings , 14-SEP-08 [Details]
(2008) Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions
Deshpande, A. A., Leen, S. B. & Hyde, T. H. (2008) Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions , 23-JUN-08 - 26-JUN-08 [Details]
(2008) Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V
Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V , 09-SEP-08 - 12-SEP-08 [Details]
(2008) A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method
Leen, S. B., Hyde, T. H., Peravali, S. & Sun, W. (2008) A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method , 27-JUL-08 - 31-JUL-08 [Details]
(2008) An asperity-contact based oxidation model for fretting wear with the presence of debris
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) An asperity-contact based oxidation model for fretting wear with the presence of debris An asperity-contact based oxidation model for fretting wear with the presence of debris , 24-SEP-08 - 27-SEP-08 [Details]
(2008) High-temperature experimental characterisation of XN40F for life prediction of SPF tools
Deshpande, A. A., Leen, S. B. & Hyde, T. H. (2008) High-temperature experimental characterisation of XN40F for life prediction of SPF tools High-temperature experimental characterisation of XN40F for life prediction of SPF tools , 03-SEP-08 - 05-SEP-08 [Details]
(2008) A comparison of failure prediction methods for superplastic deformation
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2008) A comparison of failure prediction methods for superplastic deformation A comparison of failure prediction methods for superplastic deformation , 25-APR-08 - 28-APR-08 [Details]
(2007) Failure prediction for titanium alloys using a superplastic forming limit diagram
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2007) Failure prediction for titanium alloys using a superplastic forming limit diagram Failure prediction for titanium alloys using a superplastic forming limit diagram , 05-SEP-07 - 07-SEP-07 [Details]
(2007) Fatigue crack growth in aeroengine shafts using the finite element method
Sabesan, R., Leen, S. B. & Williams, E. J. (2007) Fatigue crack growth in aeroengine shafts using the finite element method Fatigue crack growth in aeroengine shafts using the finite element method , 26-MAR-07 - 28-MAR-07 [Details]
(2007) The critical role of fretting wear in the analysis of fretting fatigue
Madge, J.J., Leen, S. B. & Shipway, P. H. (2007) The critical role of fretting wear in the analysis of fretting fatigue The critical role of fretting wear in the analysis of fretting fatigue [Details]
(2007) An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding
Sabesan, R., Leen, S. B. & Hyde, T. H. (2007) An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding , 26-MAR-07 - 28-MAR-07 [Details]
(2007) Finite element based predictions for life-limiting behaviour for large SPF tools
Deshpande, A., Leen, S. B. & Hyde, T. H. (2007) Finite element based predictions for life-limiting behaviour for large SPF tools Finite element based predictions for life-limiting behaviour for large SPF tools , 05-SEP-07 - 07-SEP-07 [Details]
(2007) Development of an anisotropic damage model for creep of welds
Peravali, S., Hyde, T. H., Cliffe, K. A. & Leen, S. B. (2007) Development of an anisotropic damage model for creep of welds Development of an anisotropic damage model for creep of welds , 24-APR-07 - 26-APR-07 , pp.267-283 [Details]
(2007) A finite element based approach to simulating the effects of debris on fretting wear
Ding, J., McColl, I. R. & Leen, S. B. (2007) A finite element based approach to simulating the effects of debris on fretting wear A finite element based approach to simulating the effects of debris on fretting wear [Details]
(2007) Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings
Houghton, D., Wavish, P. M., Leen, S. B. & Williams, E. J. (2007) Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings , 04-SEP-07 - 06-SEP-07 , pp.37-42 [Details]
(2007) An anisotropic creep damage model for anisotropic weld metal
Peravali, S., Hyde, T. H., Cliffe, K. A. & Leen, S. B. (2007) An anisotropic creep damage model for anisotropic weld metal An anisotropic creep damage model for anisotropic weld metal , 22-JUL-07 - 26-JUL-07 [Details]
(2006) Towards the modelling of fretting wear and fatigue interaction in spline couplings
Ding, K., Madge, J. J., Leen, S. B. & Williams, E. J. (2006) Towards the modelling of fretting wear and fatigue interaction in spline couplings Towards the modelling of fretting wear and fatigue interaction in spline couplings , 05-SEP-06 - 07-SEP-06 , pp.165-172 [Details]
(2006) A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens
Madge, J. J., McColl, I. R., Leen & S. B. (2006) A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens , 14-MAY-06 - 19-MAY-06 [Details]
(2006) Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods
Rajaratnam, S., Hyde, T. H. & Leen, S. B. (2006) Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods [Details]
(2006) Strain-based failure prediction for superplastic forming
Leen, S. B., Krohn, M. & Hyde, T. H. (2006) Strain-based failure prediction for superplastic forming Strain-based failure prediction for superplastic forming , 26-APR-06 - 28-APR-06 , pp.351-354 [Details]
(2006) High temperature life prediction of superplastic forming dies
Leen, S. B., Shang, J. & Hyde, T. H. (2006) High temperature life prediction of superplastic forming dies High temperature life prediction of superplastic forming dies , 05-DEC-06 - 06-DEC-06 , pp.53-54 [Details]
(2006) Experimental testing and FE modelling of the forming of two titanium SPF alloys
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2006) Experimental testing and FE modelling of the forming of two titanium SPF alloys Experimental testing and FE modelling of the forming of two titanium SPF alloys , 13-SEP-06 - 14-SEP-06 [Details]
(2005) Design of a multi-axial test specimen for fretting fatigue in splined couplings
Wavish, P., McColl, I. R. & Leen, S. B. (2005) Design of a multi-axial test specimen for fretting fatigue in splined couplings Design of a multi-axial test specimen for fretting fatigue in splined couplings , 06-SEP-05 - 08-SEP-05 , pp.267-272 [Details]
(2005) Some microstructural observations of a superplastic titanium alloy
Krohn, M. A., Pan, W., Leen, S. B., Hyde, T. H. & Walloe, S. (2005) Some microstructural observations of a superplastic titanium alloy Some microstructural observations of a superplastic titanium alloy , pp.47-52 [Details]
(2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units
Leen, S. B., Hyde, T. H., Rajaratnam, S. and Pan, W. (2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units , 05-JUL-05 - 07-JUL-05 , pp.261-268 [Details]
(2005) The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die
Shang, J., Leen, S. B. & Hyde, T. H. (2005) The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die , pp.129-134 [Details]
(2005) Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings
Bansal, P., Shipway, P. H. & Leen, S. B. (2005) Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings , 02-MAY-05 - 04-MAY-05 [Details]
(2004) FE modelling of transient heat transfer in SPF dies
Shang, J., Leen, S. B., Pashby, I. R., Hyde, T. H. & Kennedy, A. R. (2004) FE modelling of transient heat transfer in SPF dies FE modelling of transient heat transfer in SPF dies , 07-JUL-04 - 09-JUL-04 , pp.125-131 [Details]
(2004) Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation
Pan, W., Krohn, M., Leen, S. B., Hyde, T. H. and Walloe, S. (2004) Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation , pp.1101-1106 [Details]
(2004) Application of a general formulation approach for steady-state creep lifing of welded branched pipes
Leen, S. B., Hyde, T. H. and Rayner, G. (2004) Application of a general formulation approach for steady-state creep lifing of welded branched pipes Application of a general formulation approach for steady-state creep lifing of welded branched pipes , 14-APR-04 - 16-APR-04 [Details]
(2004) An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel
Soh, H. P., Ding, K., Leen, S. B. & McColl, I. R. (2004) An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel , 29-AUG-04 - 02-SEP-04 [Details]
(2003) Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour
Pan, W., Leen, S. B. & Hyde, T. H. (2003) Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour , 18-SEP-03 - 20-SEP-03 , pp.491-499 [Details]
(2003) Parametric analysis of stresses in a welded branched pipe under creep conditions
Rayner, G., Hyde, T. H. and Leen, S. B. (2003) Parametric analysis of stresses in a welded branched pipe under creep conditions Parametric analysis of stresses in a welded branched pipe under creep conditions , pp.359-369 [Details]
(2003) Effect of coefficient of friction on the fatigue life of splines
Ratsimba, C. H. H., Leen, S. B., McColl, I. R. & Williams, E. J. (2003) Effect of coefficient of friction on the fatigue life of splines Effect of coefficient of friction on the fatigue life of splines , pp.35-44 [Details]
(2003) Simplified method to predict elastic-plastic behaviour of aeroengine casings
Sabesan, R., Leen, S. B. & Hyde, T. H. (2003) Simplified method to predict elastic-plastic behaviour of aeroengine casings Simplified method to predict elastic-plastic behaviour of aeroengine casings , pp.373-380 [Details]
(2003) FE analysis of the creep of branched pipes
Hyde, T. H., Sun, W., Leen, S. B. & Rayner, G. (2003) FE analysis of the creep of branched pipes FE analysis of the creep of branched pipes , pp.41-66 [Details]
(2002) Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens
Kim, J. H., Leen, S. B. & Wykes, C. (2002) Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens , pp.9-12 [Details]
(2002) Fatigue of a representative aeroengine splined coupling
Leen, S. B., Ratsimba, C. H. H., Williams, E. J. & McColl, I. R. (2002) Fatigue of a representative aeroengine splined coupling Fatigue of a representative aeroengine splined coupling , pp.1079-1086 [Details]
(2001) Finite element study on the static strength of a cracked tubular T-joint
Saad, S.B., Leen, S. B. and Hyde, T. H. (2001) Finite element study on the static strength of a cracked tubular T-joint Finite element study on the static strength of a cracked tubular T-joint , 03-APR-01 - 05-APR-01 , pp.247-255 [Details]
(2000) A representative model for life assessment of spline couplings
Hyde, T. R., Leen, S. B., McColl, I. R., Williams, E. J. & Taylor, J. W. (2000) A representative model for life assessment of spline couplings A representative model for life assessment of spline couplings , pp.625-635 [Details]
(2000) The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints
Leen, S. B. and Hyde, T. H. (2000) The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints , 28-MAY-00 - 02-JUN-00 , pp.45-52 [Details]
(1999) Experimental and finite element investigations on the static strength of a plane tubular framework structure
Hyde, T. H., Ou, H. and Leen, S. B. (1999) Experimental and finite element investigations on the static strength of a plane tubular framework structure Experimental and finite element investigations on the static strength of a plane tubular framework structure , pp.63-70 [Details]
(1998) Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes
Leen, S. B. and Hyde, T. H. (1998) Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes , 30-NOV-98 - 04-DEC-98 , pp.24-31 [Details]
(1998) Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction
Leen, S. B. and Hyde, T. H. (1998) Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction , 24-APR-98 - 29-MAY-98 , pp.56-63 [Details]
(1998) A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints
Hyde, T. H., Saad, S. B., Khalid, Y., Leen, S. B. and Warrior, N. A. (1998) A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints , 26-AUG-98 - 28-AUG-98 , pp.293-302 [Details]
(1998) Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld
Leen, S. B. and Hyde, T. H. (1998) Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld , 26-AUG-98 - 28-AUG-98 , pp.285-292 [Details]

Workshops

  Year Publication
(2008) Contact evolution based fretting fatigue prediction, Part One: Experimental and Numerical Modelling Aspects.
Leen, S. B. (2008) Contact evolution based fretting fatigue prediction, Part One: Experimental and Numerical Modelling Aspects. Workshops [Details]
(2006) Finite element simulation of superplastic forming.
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2006) Finite element simulation of superplastic forming. Workshops [Details]
(2005) Life prediction in aeroengine splines.
Williams, E. J., McColl, I. R., Leen, S. B., Sum, W. S., Ding, J. & Ratsimba, C. H. H. (2005) Life prediction in aeroengine splines. Workshops [Details]
(2005) Overview of material behaviour modelling for FE simulation in superplastic forming.
Leen, S. B. (2005) Overview of material behaviour modelling for FE simulation in superplastic forming. Workshops [Details]
(2003) Fretting and fatigue in splined couplings.
Leen, S. B. Hyde, T. R. & McColl, I. R. (2003) Fretting and fatigue in splined couplings. Workshops [Details]
(2001) Fatigue of a representative aeroengine splined coupling under torque overload.
Leen, S. B., Richardson, I. J., Ratsimba, C. H. H., McColl, I. R. & Williams, E. J. (2001) Fatigue of a representative aeroengine splined coupling under torque overload. Workshops [Details]