Prof. Sean Leen

B.Eng.,M.Eng.Sc.,Ph.D.,PGCAP

Contact Details

Professor
Mechanical & Biomedical Eng
ENG-2051
New Engineering Building
NUI Galway
T: Ext. 5955
E: sean.leen@nuigalway.ie
 
researcher
 

Biography

Peer Reviewed Journals

  Year Publication
(2021) 'Dual-phase cohesive zone modelling and experimental validation for hydrogen-assisted cracking of 2205 duplex stainless steel'
Tao, P, Ye, F, Liu, H, Gong, J, Yang, X, Barrett, RA, Leen, SB (2021) 'Dual-phase cohesive zone modelling and experimental validation for hydrogen-assisted cracking of 2205 duplex stainless steel'. Int J Pressure Vessels And Piping, 190 [DOI] [Details]
(2021) 'Experimental investigation on damage evolution in pre-corroded aluminum alloy 7075-T7651 under fatigue loading'
Song, HP,Liu, CC,Zhang, H,Yang, XD,Chen, YJ,Leen, SB (2021) 'Experimental investigation on damage evolution in pre-corroded aluminum alloy 7075-T7651 under fatigue loading'. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 799 [DOI] [Details]
(2021) 'Effect of Welding on Microstructure and Mechanical Response of X100Q Bainitic Steel through Nanoindentation, Tensile, Cyclic Plasticity and Fatigue Characterisation'
Devaney, RJ, O’Donoghue, PE, Leen, SB (2021) 'Effect of Welding on Microstructure and Mechanical Response of X100Q Bainitic Steel through Nanoindentation, Tensile, Cyclic Plasticity and Fatigue Characterisation'. Mat Sci Eng A, 804 [DOI] [Details]
(2021) '“Towards a process-structure model for Ti-6Al-4V during additive manufacturing”'
Yang, X, Barrett, RA, Tong, M, Harrison, NM, Leen, SB (2021) '“Towards a process-structure model for Ti-6Al-4V during additive manufacturing”'. Journal of Manufacturing Processes, 61 :428-439 [DOI] [Details]
(2021) '“Low-cycle fatigue of X100 welded connections for steel catenary risers: Physically-based yield strength modelling and DIC testing”'
O’Donoghue, PE, Leen, SB, Barrett, RA (2021) '“Low-cycle fatigue of X100 welded connections for steel catenary risers: Physically-based yield strength modelling and DIC testing”'. Journal of Advanced Joining Processes, [Details]
(2021) 'Experimental investigation on damage evolution in pre-corroded aluminum alloy 7075-T7651 under fatigue loading'
Song, HP;Liu, CC;Zhang, H;Yang, XD;Chen, YJ;Leen, SB (2021) 'Experimental investigation on damage evolution in pre-corroded aluminum alloy 7075-T7651 under fatigue loading'. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 799 [DOI] [Details]
(2021) 'A Dislocation Mechanics Constitutive Model for Effects of Welding-Induced Microstructural Transformation on Cyclic Plasticity and Low-Cycle fatigue for X100Q Bainitic Steel'
Devaney, RJ, Barrett, RA, O’Donoghue, PE, Leen, SB (2021) 'A Dislocation Mechanics Constitutive Model for Effects of Welding-Induced Microstructural Transformation on Cyclic Plasticity and Low-Cycle fatigue for X100Q Bainitic Steel'. Int J Fatigue, 145 [DOI] [Details]
(2021) 'A High-Fidelity Crystal Plasticity Finite Element Methodology for Low-Cycle Fatigue Using Automatic EBSD Scan Conversion: Application to Cobalt-Chromium Alloy'
Tu, Y, Leen, SB, Harrison, NM, (2021) 'A High-Fidelity Crystal Plasticity Finite Element Methodology for Low-Cycle Fatigue Using Automatic EBSD Scan Conversion: Application to Cobalt-Chromium Alloy'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, [Details]
(2020) 'Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN'
O'Hara, EM;Phelan, B;Osgerby, S;Barrett, RA;Raghavendra, R;Leen, SB;Harrison, NM (2020) 'Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN'. Materialia, 12 [DOI] [Details]
(2020) 'In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T7651'
Song, HP;Liu, CC;Zhang, H;Du, J;Yang, XD;Leen, SB (2020) 'In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T7651'. International Journal Of Fatigue, 137 [DOI] [ARAN Link] [Details]
(2020) 'Prediction of microstructure evolution for additive manufacturing of Ti-6Al-4V'
X Yang, Barrett, RA, Tong, M, Harrison, NM, Leen, SB (2020) 'Prediction of microstructure evolution for additive manufacturing of Ti-6Al-4V'. Procedia Manufacturing, 47 :1178-1183 [DOI] [ARAN Link] [Details]
(2020) 'In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T7651'
Song, HP,Liu, CC,Zhang, H,Du, J,Yang, XD,Leen, SB (2020) 'In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T7651'. International Journal Of Fatigue, 137 [DOI] [Details]
(2020) 'Development and assessment of a blade element momentum theory model for high solidity vertical axis tidal turbines'
Mannion, B,Leen, SB,Nash, S (2020) 'Development and assessment of a blade element momentum theory model for high solidity vertical axis tidal turbines'. Ocean Engineering, 197 [DOI] [ARAN Link] [Details]
(2020) 'A review of thermal, microstructural and constitutive modelling of 9Cr steel for power plant applications: Towards a through-process model for structural integrity of welded connections'
MacArdghail, P, Leen, SB, Harrison, NM (2020) 'A review of thermal, microstructural and constitutive modelling of 9Cr steel for power plant applications: Towards a through-process model for structural integrity of welded connections'. Int J Pressure Vessels And Piping, [ARAN Link] [Details]
(2020) 'A global-local fretting analysis methodology and design study for the pressure armour layer of dynamic flexible marine risers'
O'Halloran, SM;Connaire, AD;Harte, AM;Leen, SB (2020) 'A global-local fretting analysis methodology and design study for the pressure armour layer of dynamic flexible marine risers'. Tribology International, 142 [DOI] [ARAN Link] [Details]
(2020) 'Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN'
O'Hara, EM,Phelan, B,Osgerby, S,Barrett, RA,Raghavendra, R,Leen, SB,Harrison, NM (2020) 'Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN'. Materialia, 12 [DOI] [Details]
(2020) '“A dislocation-based yield strength determination model in nano-indentation test’'
Ping Tao, Fei Ye, Jianming Gong, Richard A. Barrett and Seán B. Leen (2020) '“A dislocation-based yield strength determination model in nano-indentation test’'. Proc I Mech E, Part L, Journal of Materials: Design and Applications, [DOI] [Details]
(2019) 'An experimental study of a flow-accelerating hydrokinetic device'
Mannion B, McCormack V, Kennedy C, Leen S, Nash S (2019) 'An experimental study of a flow-accelerating hydrokinetic device'. Institution of Mechanical Engineers. Proceedings. Part A: Journal of Power and Energy, 233 (1) [DOI] [Details]
(2019) 'A CFD Investigation of a Variable-pitch Vertical Axis Hydrokinetic Turbine with Incorporated Flow Acceleration'
Mannion B, McCormack V, Leen SB and Nash S (2019) 'A CFD Investigation of a Variable-pitch Vertical Axis Hydrokinetic Turbine with Incorporated Flow Acceleration'. Journal of Ocean Engineering and Marine Energy, 5 (1):21-39 [ARAN Link] [Details]
(2019) 'An efficient computational framework for hydrofoil characterisation and tidal turbine design'
Heavey, SC,Leen, SB,McGarry, PJ (2019) 'An efficient computational framework for hydrofoil characterisation and tidal turbine design'. Ocean Engineering, 171 :93-107 [DOI] [ARAN Link] [Details]
(2019) 'An experimental study of a flow-accelerating hydrokinetic device'
Mannion, B,McCormack, V,Kennedy, C,Leen, SB,Nash, S (2019) 'An experimental study of a flow-accelerating hydrokinetic device'. Proceedings Of The Institution Of Mechanical Engineers Part A-Journal Of Power And Energy, 233 :148-162 [DOI] [ARAN Link] [Details]
(2019) 'A comparison of two quasi-static computational models for assessment of intra-myocardial injection as a therapeutic strategy for heart failure'
Fan, YL;Ronan, W;Teh, I;Schneider, JE;Varela, CE;Whyte, W;McHugh, P;Leen, S;Roche, E (2019) 'A comparison of two quasi-static computational models for assessment of intra-myocardial injection as a therapeutic strategy for heart failure'. International Journal For Numerical Methods In Biomedical Engineering, 35 (9) [DOI] [ARAN Link] [Details]
(2019) 'A precipitate evolution-based continuum damage mechanics model of creep behaviour in welded 9Cr steel at high temperature'
Murchu, CO;Leen, SB;O'Donoghue, PE;Barrett, RA (2019) 'A precipitate evolution-based continuum damage mechanics model of creep behaviour in welded 9Cr steel at high temperature'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 233 :39-51 [DOI] [ARAN Link] [Details]
(2019) 'Microstructure modeling of high-temperature microcrack initiation and evolution in a welded 9Cr martensitic steel'
Li, M,O'Donoghue, PE,Leen, SB (2019) 'Microstructure modeling of high-temperature microcrack initiation and evolution in a welded 9Cr martensitic steel'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 233 :2160-2174 [DOI] [ARAN Link] [Details]
(2019) 'A process-structure-property model for welding of 9Cr power plant components: The influence of welding process temperatures on in-service cyclic plasticity response'
Mac Ardghail, P;Harrison, N;Leen, SB (2019) 'A process-structure-property model for welding of 9Cr power plant components: The influence of welding process temperatures on in-service cyclic plasticity response'. International Journal Of Pressure Vessels And Piping, 173 :26-44 [DOI] [ARAN Link] [Details]
(2019) 'Microstructure modeling of high-temperature microcrack initiation and evolution in a welded 9Cr martensitic steel'
Li, M;O'Donoghue, PE;Leen, SB (2019) 'Microstructure modeling of high-temperature microcrack initiation and evolution in a welded 9Cr martensitic steel'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 233 :2160-2174 [DOI] [Details]
(2018) 'Fatigue life of pitch- and stall-regulated composite tidal turbine blades'
Kennedy, CR,Jaksic, V,Leen, SB,Bradaigh, CMO (2018) 'Fatigue life of pitch- and stall-regulated composite tidal turbine blades'. Renewable Energy, 121 :688-699 [DOI] [ARAN Link] [Details]
(2018) 'A strain-gradient, crystal plasticity model for microstructure-sensitive fretting crack initiation in ferritic-pearlitic steel for flexible marine risers'
Ashton, PJ,Harte, AM,Leen, SB (2018) 'A strain-gradient, crystal plasticity model for microstructure-sensitive fretting crack initiation in ferritic-pearlitic steel for flexible marine risers'. International Journal Of Fatigue, 111 :81-92 [DOI] [ARAN Link] [Details]
(2018) 'A two and three-dimensional CFD investigation into performance prediction and wake characterisation of a vertical axis turbine'
Mannion, B,Leen, SB,Nash, S (2018) 'A two and three-dimensional CFD investigation into performance prediction and wake characterisation of a vertical axis turbine'. Journal Of Renewable And Sustainable Energy, 10 [DOI] [ARAN Link] [Details]
(2018) 'Influence of Composite Fatigue Properties on Marine Tidal Turbine Blade Design'
Jaksic, V,Kennedy, CR,Grogan, DM,Leen, SB,Bradaigh, CMO,Davies, P,Rajapakse, YDS (2018) 'Influence of Composite Fatigue Properties on Marine Tidal Turbine Blade Design'. Iutam Symposium On Micromechanics Of Plasticity And Damage Of Multiphase Materials, 245 :195-223 [DOI] [Details]
(2018) 'Validation of the multi-objective structural optimisation of a composite wind turbine blade'
Fagan, EM,Da La Torre, O,Leen, SB,Goggins, J (2018) 'Validation of the multi-objective structural optimisation of a composite wind turbine blade'. Composite Structures, 204 :567-577 [DOI] [ARAN Link] [Details]
(2018) 'Influence of microstructural defects and hydrostatic pressure on water absorption in composite materials for tidal energy'
Grogan, DM,Flanagan, M,Walls, M,Leen, SB,Doyle, A,Harrison, NH,Mamalis, D,Goggins, J (2018) 'Influence of microstructural defects and hydrostatic pressure on water absorption in composite materials for tidal energy'. Journal Of Composite Materials, 52 :2899-2917 [DOI] [ARAN Link] [Details]
(2018) 'Effect of pre-corrosion on damage evolution and crack propagation in aluminum alloy 7050-T7651'
Song, H,Bai, Z,Zhang, H,Niu, Y,Leen, SB (2018) 'Effect of pre-corrosion on damage evolution and crack propagation in aluminum alloy 7050-T7651'. Fatigue & Fracture Of Engineering Materials & Structures, 41 :2376-2390 [DOI] [ARAN Link] [Details]
(2018) 'A through-process, thermomechanical model for predicting welding-induced microstructure evolution and post-weld high-temperature fatigue response'
Mac Ardghail, P,Harrison, N,Leen, SB (2018) 'A through-process, thermomechanical model for predicting welding-induced microstructure evolution and post-weld high-temperature fatigue response'. International Journal Of Fatigue, 112 :216-232 [DOI] [ARAN Link] [Details]
(2018) 'Hydrodynamic Design and Analysis of a Novel Vertical Axis Turbine'
Heavey, SC,Leen, SB,McGarry, JP (2018) 'Hydrodynamic Design and Analysis of a Novel Vertical Axis Turbine'. International Journal Of Offshore And Polar Engineering, 28 :393-401 [DOI] [Details]
(2018) 'The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling'
O'Hara, EM,Harrison, NM,Polomski, BK,Barrett, RA,Leen, SB (2018) 'The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling'. Fatigue & Fracture Of Engineering Materials & Structures, 41 :2288-2304 [DOI] [ARAN Link] [Details]
(2018) 'An experimental study on the key fretting variables for flexible marine risers'
O'Halloran, SM, Harte, AM, Shipway, PH, Leen, SB (2018) 'An experimental study on the key fretting variables for flexible marine risers'. Tribology International, 117 (c):141-151 [DOI] [ARAN Link] [Details]
(2018) 'The effect of ferrite phases on the micromechanical response and crack initiation in the intercritical heat-affected zone of a welded 9Cr martensitic steel'
Li, M,Sun, F,Li, DF,O'Donoghue, PE,Leen, SB,O'Dowd, NP (2018) 'The effect of ferrite phases on the micromechanical response and crack initiation in the intercritical heat-affected zone of a welded 9Cr martensitic steel'. Fatigue & Fracture Of Engineering Materials & Structures, 41 :1245-1259 [DOI] [ARAN Link] [Details]
(2018) 'A two and three-dimensional CFD investigation into performance prediction and wake characterisation of a vertical axis turbine'
Mannion B, Leen SB, Nash S (2018) 'A two and three-dimensional CFD investigation into performance prediction and wake characterisation of a vertical axis turbine'. Journal Of Renewable And Sustainable Energy, 10 (3) [DOI] [ARAN Link] [Details]
(2018) 'A review of the integrity of metallic vehicle armour to projectile attack'
Lenihan, D., Ronan, W., O'Donoghue, P. E., Leen, S. B. (2018) 'A review of the integrity of metallic vehicle armour to projectile attack'. [DOI] [ARAN Link] [Details]
(2018) 'Experimental characterisation and computational modelling for cyclic elastic-plastic constitutive behaviour and fatigue damage of X100Q for steel catenary risers'
Devaney, RJ,O'Donoghue, PE,Leen, SB (2018) 'Experimental characterisation and computational modelling for cyclic elastic-plastic constitutive behaviour and fatigue damage of X100Q for steel catenary risers'. International Journal Of Fatigue, 116 :366-378 [DOI] [ARAN Link] [Details]
(2018) 'A physically-based high temperature yield strength model for 9Cr steels'
Barrett, RA;O'Donoghue, PE;Leen, SB (2018) 'A physically-based high temperature yield strength model for 9Cr steels'. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 730 :410-424 [DOI] [ARAN Link] [Details]
(2017) 'A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM: Shipway, PH; Connaire, A; Leen, SB; Harte, AM (2017) 'A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers'. Tribology International, [DOI] [ARAN Link] [Details]
(2017) 'Experimental investigation, numerical modelling and multi-objective optimisation of composite wind turbine blades'
Fagan, EM,Leen, SB,de la Torre, O,Goggins, J (2017) 'Experimental investigation, numerical modelling and multi-objective optimisation of composite wind turbine blades'. Journal of Structural Integrity and Maintenance, 2 :109-119 [DOI] [ARAN Link] [Details]
(2017) 'A physically-based constitutive model for high temperature microstructural degradation under cyclic deformation'
Barrett, RA;O'Donoghue, PE;Leen, SB (2017) 'A physically-based constitutive model for high temperature microstructural degradation under cyclic deformation'. International Journal Of Fatigue, 100 :388-406 [DOI] [ARAN Link] [Details]
(2017) 'Global and local fatigue analysis of X100 and X60 steel catenary riser girth welds'
Devaney, RJ,O'Donoghue, PE,Leen, SB (2017) 'Global and local fatigue analysis of X100 and X60 steel catenary riser girth welds'. Journal of Structural Integrity and Maintenance, 2 :181-189 [DOI] [ARAN Link] [Details]
(2017) 'Rotational moulding of PEEK polymer liners with carbon fibre/PEEK over tape-placement for space cryogenic fuel tanks'
Murray, BR,Doyle, A,Feerick, PJ,Semprimoschnig, COA,Leen, SB,Bradaigh, CMO (2017) 'Rotational moulding of PEEK polymer liners with carbon fibre/PEEK over tape-placement for space cryogenic fuel tanks'. Materials & Design, 132 :567-581 [DOI] [ARAN Link] [Details]
(2017) 'A physically-based creep damage model for effects of different precipitate types'
Murchu, CO,Leen, SB,O'Donoghue, PE,Barrett, RA (2017) 'A physically-based creep damage model for effects of different precipitate types'. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 682 :714-722 [DOI] [ARAN Link] [Details]
(2017) 'Physical experimental static testing and structural design optimisation for a composite wind turbine blade'
Fagan, EM,Flanagan, M,Leen, SB,Flanagan, T,Doyle, A,Goggins, J (2017) 'Physical experimental static testing and structural design optimisation for a composite wind turbine blade'. Composite Structures, 164 :90-103 [DOI] [ARAN Link] [Details]
(2017) 'Statistical grain size effects in fretting crack initiation'
Ashton, PJ,Harte, AM,Leen, SB (2017) 'Statistical grain size effects in fretting crack initiation'. Tribology International, 108 :75-86 [DOI] [Details]
(2017) 'A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM,Shipway, PH,Connaire, AD,Leen, SB,Harte, AM (2017) 'A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers'. Tribology International, 108 :7-15 [DOI] [ARAN Link] [Details]
(2017) 'Fatigue damage characterisation of MarBN steel for high temperature flexible operating conditions'
O'Hara, EM,Harrison, NM,Polomski, BK,Barrett, RA,Leen, SB (2017) 'Fatigue damage characterisation of MarBN steel for high temperature flexible operating conditions'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 231 :23-37 [DOI] [ARAN Link] [Details]
(2017) 'Influence of material inhomogeneity on the mechanical response of a tempered martensite steel'
Li, M,Sun, FW,Barrett, RA,Meade, E,Li, DF,O'Donoghue, PE,Leen, SB,O'Dowd, NP (2017) 'Influence of material inhomogeneity on the mechanical response of a tempered martensite steel'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 231 :14-22 [DOI] [ARAN Link] [Details]
(2017) 'A multi-scale crystal plasticity model for cyclic plasticity and low-cycle fatigue in a precipitate-strengthened steel at elevated temperature'
Li, DF,Barrett, RA,O'Donoghue, PE,O'Dowd, NP,Leen, SB (2017) 'A multi-scale crystal plasticity model for cyclic plasticity and low-cycle fatigue in a precipitate-strengthened steel at elevated temperature'. Journal Of The Mechanics And Physics Of Solids, 101 :44-62 [DOI] [ARAN Link] [Details]
(2017) 'The effect of the beta phase on the micromechanical response of dual-phase titanium alloys'
Ashton, PJ,Jun, TS,Zhang, Z,Britton, TB,Harte, AM,Leen, SB,Dunne, FPE (2017) 'The effect of the beta phase on the micromechanical response of dual-phase titanium alloys'. International Journal Of Fatigue, 100 :377-387 [DOI] [ARAN Link] [Details]
(2017) 'Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers'
Flanagan, M,Grogan, DM,Goggins, J,Appel, S,Doyle, K,Leen, SB,Bradaigh, CMO (2017) 'Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers'. Composites Part A-Applied Science And Manufacturing, 101 :173-184 [DOI] [ARAN Link] [Details]
(2017) 'Predictions of ICHAZ cyclic thermo-mechanical response in GTAW process for 9Cr steels'
Padraig Mac Ardghail , Richard A. Barrett , Noel Harrison , Sean B. Leen (2017) 'Predictions of ICHAZ cyclic thermo-mechanical response in GTAW process for 9Cr steels'. Journal Of Pressure Vessel Technology-Transactions Of The Asme, 141 (2) [DOI] [ARAN Link] [Details]
(2016) 'Microscale deformation of a tempered martensite ferritic steel: Modelling and experimental study of grain and sub-grain interactions'
Golden, BJ,Li, DF,Guo, YN,Tiernan, P,Leen, SB,O'Dowd, NP (2016) 'Microscale deformation of a tempered martensite ferritic steel: Modelling and experimental study of grain and sub-grain interactions'. Journal Of The Mechanics And Physics Of Solids, 86 :42-52 [DOI] [Details]
(2016) 'Modelling of fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM, Connaire, A, Harte, AM, Leen, SB (2016) 'Modelling of fretting in the pressure armour layer of flexible marine risers'. Tribology International, [DOI] [Details]
(2016) 'Statistical grain size effects in fretting crack initiation'
Ashton, PJ; Harte, AM; Leen, SB (2016) 'Statistical grain size effects in fretting crack initiation'. Tribology International, [DOI] [ARAN Link] [Details]
(2016) 'Modelling of fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM; Connaire, AD; Harte, AM; Leen, SB (2016) 'Modelling of fretting in the pressure armour layer of flexible marine risers'. Tribology International, 100 :306-316 [DOI] [Details]
(2016) 'Damage mechanics based design methodology for tidal current turbine composite blades'
Fagan, EM,Kennedy, CR,Leen, SB,Goggins, J (2016) 'Damage mechanics based design methodology for tidal current turbine composite blades'. Renewable Energy, 97 :358-372 [DOI] [Details]
(2016) 'A microstructural investigation into the accelerated corrosion of P91 steel during biomass co-firing'
O'Hagan, CP,O'Brien, BJ,Leen, SB,Monaghan, RFD (2016) 'A microstructural investigation into the accelerated corrosion of P91 steel during biomass co-firing'. Corrosion Science, 109 :101-114 [DOI] [Details]
(2016) 'Helium permeability of polymer materials as liners for composite overwrapped pressure vessels'
Murray, BR,Leen, SB,Semprimoschnig, COA,Bradaigh, CMO (2016) 'Helium permeability of polymer materials as liners for composite overwrapped pressure vessels'. Journal Of Applied Polymer Science, 133 [DOI] [Details]
(2016) 'Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels'
Li, DF,Barrett, RA,O'Donoghue, PE,Hyde, CJ,O'Dowd, NP,Leen, SB (2016) 'Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels'. International Journal Of Fatigue, 87 :192-202 [DOI] [Details]
(2016) 'Cyclic plasticity of welded P91 material for simple and complex power plant connections'
Li, M,Barrett, RA,Scully, S,Harrison, NM,Leen, SB,O'Donoghue, PE (2016) 'Cyclic plasticity of welded P91 material for simple and complex power plant connections'. International Journal Of Fatigue, 87 :391-404 [DOI] [ARAN Link] [Details]
(2016) 'Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing'
O'Hagan, C. P. and Barrett, R. A. and Leen, S. B. and Monaghan, R. F. D. (2016) 'Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing'. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 138 (2) [DOI] [ARAN Link] [Details]
(2015) 'Finite element based damage assessment of composite tidal turbine blades'
Fagan, EM; Leen, SB; Kennedy, CR; Goggins, J (2015) 'Finite element based damage assessment of composite tidal turbine blades'. Journal Of Physics; Conference Series, 628 ((2015) 012106) [DOI] [Details]
(2015) 'Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing'
O'Hagan, CP,O'Brien, BJ,Griffin, F,Hooper, B,Leen, SB,Monaghan, RFD (2015) 'Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing'. Energy & Fuels, 29 :3082-3095 [DOI] [Details]
(2015) 'Damage and permeability in tape-laid theromplastic composite cryogenic tanks'
Grogan, D.M., Ó Brádaigh, C.M., McGarry, J.P., Leen, S.B. (2015) 'Damage and permeability in tape-laid theromplastic composite cryogenic tanks'. Composites Part A-Applied Science And Manufacturing, 78 :390-402 [ARAN Link] [Details]
(2015) 'micro-scale testing and micromechanical modelling for high cycle fatgiue for CoCr stent material'
Sweeney, CA, O'Brien, B, Dunne, FPE, McHugh, PE, Leen, SB. (2015) 'micro-scale testing and micromechanical modelling for high cycle fatgiue for CoCr stent material'. Journal Of Mechanical Behavior Of Biomedical Materials, 46 :244-260 [ARAN Link] [Details]
(2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'
O'Hagan, CP, O'Brien, BJ, Leen, SB, Monaghan, RFD. (2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'. Energy & Fuels, 29 :3082-3095 [DOI] [ARAN Link] [Details]
(2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'
Barrett, RA, O’Donoghue, PE, Leen, SB (2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'. Computational Materials Science, 92 :286-297 [DOI] [Details]
(2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'
Barrett, RA, O’Donoghue, PE, Leen, SB (2015) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'. Journal Of Pressure Vessel Technology, [ARAN Link] [Details]
(2015) 'Damage and permeability in tape-laid thermoplastic composite cryogenic tanks'
Grogan, DM,Bradaigh, CMO,McGarry, JP,Leen, SB (2015) 'Damage and permeability in tape-laid thermoplastic composite cryogenic tanks'. Composites Part A-Applied Science And Manufacturing, 78 :390-402 [DOI] [Details]
(2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permability'
Grogan, D. M., Ó Brádaigh, C.M., Leen, S.B. (2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permability'. Composite Structures, 120 :246-261 [Details]
(2015) 'Modelling of fretting in the pressure armour layer of flexible marine risers'
O'Halloran, SM, Harte, AM, Leen, SB (2015) 'Modelling of fretting in the pressure armour layer of flexible marine risers'. Tribology International, [Details]
(2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'
O’Hagan CP, O’Brien BJ, Griffin F, Hooper B, Leen SB, Monaghan RFD (2015) 'A porosity-based corrosion model for alkali halide ash deposits during biomass co-firing'. Energy And Fuels, 29 (5):3082-3095 [Details]
(2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permeability'
Grogan, DM,Bradaigh, CMO,Leen, SB (2015) 'A combined XFEM and cohesive zone model for composite laminate microcracking and permeability'. Composite Structures, 120 :246-261 [DOI] [ARAN Link] [Details]
(2015) 'High temperature, low cycle fatigue characterisation of MarBN at 600⁰C'
Barrett, RA, O'Hara, E, O'Donoghue, P.E., Leen,SB (2015) 'High temperature, low cycle fatigue characterisation of MarBN at 600⁰C'. Trans Asme, Journal Of Pressure Vessel Technology, [Details]
(2014) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'
Barrett, RA,O'Donoghue, PE,Leen, SB (2014) 'A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels'. Computational Materials Science, 92 :286-297 [DOI] [Details]
(2014) 'A physical corrosion model for bioabsorbable metal stents'
Grogan, JA,Leen, SB,McHugh, PE (2014) 'A physical corrosion model for bioabsorbable metal stents'. Acta Biomaterialia, 10 :2313-2322 [DOI] [ARAN Link] [Details]
(2014) 'Cyclic viscoplasticity testing and modelling of a service-aged P91 steel'
Hyde, CJ, Sun, W, Hyde, TH, Rousse, JP, Farragher, T, O’Dowd, N.P., Leen, SB, (2014) 'Cyclic viscoplasticity testing and modelling of a service-aged P91 steel'. Journal Of Pressure Vessel Technology, 136 (044501) [DOI] [ARAN Link] [Details]
(2014) 'High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material'
1) T.P. Farragher, S. Scully, N.P. O'Dowd, C.J. Hyde, S.B. Leen (2014) 'High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material'. Journal Of Pressure Vessel Technology, 136 (021403) [DOI] [ARAN Link] [Details]
(2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'
McCarthy, O.J.; McGarry, J.P.; Leen, S.B. (2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'. Tribology International, 76 :100-115 [DOI] [Details]
(2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'
Sweeney, CA;O'Brien, B;McHugh, PE;Leen, SB (2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'. Biomaterials, 35 :36-48 [DOI] [Details]
(2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr stents'
Sweeney, CA, O'Brien, B, Dunne, FPE, McHugh, PE, Leen, SB. (2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr stents'. Acta Materialia, 78 :341-353 [ARAN Link] [Details]
(2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2014) 'The effect of grain orientation on fretting fatigue plasticity and life prediction'. Tribology International, 76 :100-115 [DOI] [ARAN Link] [Details]
(2014) 'A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel'
Barrett, RA, T.P. Farragher, C.J. Hyde, N.P. O’Dowd, O’Donoghue, PE, Leen, SB (2014) 'A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel'. Journal Of Pressure Vessel Technology, 136 (021402) [DOI] [ARAN Link] [Details]
(2014) 'A multi-axial cyclic viscoplasticity model for high temperature fatigue of P91 steel'
Barrett, RA, T.P. Farragher, N.P. O’Dowd, O’Donoghue, PE, Leen, SB (2014) 'A multi-axial cyclic viscoplasticity model for high temperature fatigue of P91 steel'. Materials Science And Technology, 30 :67-74 [DOI] [ARAN Link] [Details]
(2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'. International Journal Of Fatigue, 62 :180-193 [DOI] [ARAN Link] [Details]
(2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr alloy'
Sweeney, C.A., O'Brien, B. Dunne, F.P.E., McHugh, P.E. Leen, S.B. (2014) 'Strain-gradient modelling of grain size effects on fatigue of CoCr alloy'. Acta Materialia, 78 :341-353 [Details]
(2014) 'Process modelling and optimization of keyhole plasma arc welding of thin Ti-6Al-4V'
Sun, W,Mohammed, MB,Xu, L,Hyde, TH,McCartney, DG,Leen, SB (2014) 'Process modelling and optimization of keyhole plasma arc welding of thin Ti-6Al-4V'. Journal Of Strain Analysis For Engineering Design, 49 :410-420 [DOI] [Details]
(2014) 'Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates'
Grogan, DM,Leen, SB,Semprimoschnig, COA,Bradaigh, CMO (2014) 'Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates'. Composites Part A-Applied Science And Manufacturing, 66 :237-250 [DOI] [ARAN Link] [Details]
(2014) 'Void Distributions and Permeability Prediction for Rotationally Moulded Polymers'
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M (2014) 'Void Distributions and Permeability Prediction for Rotationally Moulded Polymers'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, [ARAN Link] [Details]
(2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'
Sweeney, C.A., O'Brien, B., McHugh, P.E., Leen, S.B. (2014) 'Experimental characterisation for micromechanical modelling of CoCr stent fatigue'. Biomaterials, 35 :36-48 [Details]
(2014) 'Computational micromechanics of bioabsorbable magnesium stents'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2014) 'Computational micromechanics of bioabsorbable magnesium stents'. Journal Of Mechanical Behaviour Of Biomedical Materials, 34 :93-105 [Details]
(2014) 'Micro-macro wear-fatigue of modular hip implant taper lock coupling'
Zhang, T., Harrison, N.M., McDonnell, P.F., McHugh, P.E., Leen, S.B. (2014) 'Micro-macro wear-fatigue of modular hip implant taper lock coupling'. Journal Of Strain Analysis For Engineering Design, 49 (1):2-18 [Details]
(2014) 'An XFEM-Based Methodology for Fatigue Delamination and Permeability in Composites'
Grogan, D.M., Leen, S.B. and Ó Brádaigh, C.M., (2014) 'An XFEM-Based Methodology for Fatigue Delamination and Permeability in Composites'. Composite Structures, 107 :205-218 [Details]
(2014) 'High Temperature, Low Cycle Fatigue Characterization of P91 Weld and Heat Affected Zone Material'
Farragher, TP,Scully, S,O'Dowd, NP,Hyde, CJ,Leen, SB (2014) 'High Temperature, Low Cycle Fatigue Characterization of P91 Weld and Heat Affected Zone Material'. Journal Of Pressure Vessel Technology-Transactions Of The Asme, 136 [DOI] [Details]
(2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'
McCarthy, OJ,McGarry, JP,Leen, SB (2014) 'Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti-6Al-4V'. International Journal Of Fatigue, 62 :180-193 [DOI] [Details]
(2014) 'Cyclic Viscoplasticity Testing and Modeling of a Service-Aged P91 Steel'
Hyde, CJ,Sun, W,Hyde, TH,Rouse, JP,Farragher, T,O'Dowd, NP,Leen, SB (2014) 'Cyclic Viscoplasticity Testing and Modeling of a Service-Aged P91 Steel'. Journal Of Pressure Vessel Technology-Transactions Of The Asme, 136 [DOI] [Details]
(2014) 'A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel'
Barrett, RA,Farragher, TP,Hyde, CJ,O'Dowd, NP,O'Donoghue, PE,Leen, SB (2014) 'A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel'. Journal Of Pressure Vessel Technology-Transactions Of The Asme, 136 [DOI] [Details]
(2014) 'Multiaxial cyclic viscoplasticity model for high temperature fatigue of P91 steel'
Barrett, RA,Farragher, TP,O'Dowd, NP,O'Donoghue, PE,Leen, SB (2014) 'Multiaxial cyclic viscoplasticity model for high temperature fatigue of P91 steel'. Materials Science And Technology, 30 :67-74 [DOI] [Details]
(2013) 'A finite element methodology for wear–fatigue analysis for modular hip implants'
Zhang, T. and Harrison, N. M. and McDonnell, P. F. and McHugh, P. E. and Leen, S. B. (2013) 'A finite element methodology for wear–fatigue analysis for modular hip implants'. Tribology International, 65 (0):113-127 [Details]
(2013) 'A finite element methodology for wear–fatigue analysis for modular hip implants'
Zhang, T.,Harrison, N. M.,McDonnell, P. F.,McHugh, P. E.,Leen, S. B. (2013) 'A finite element methodology for wear–fatigue analysis for modular hip implants'. Tribology International, 65 (00):113-127 [Details]
(2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'
Sweeney, CA,Vorster, W,Leen, SB,Sakurada, E,McHugh, PE,Dunne, FPE (2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'. Journal Of The Mechanics And Physics Of Solids, 61 :1224-1240 [DOI] [Details]
(2013) 'Thermomechanical Analysis of a Pressurized Pipe Under Plant Conditions'
Farragher, TP,Scully, S,O'Dowd, NP,Leen, SB (2013) 'Thermomechanical Analysis of a Pressurized Pipe Under Plant Conditions'. Journal Of Pressure Vessel Technology-Transactions Of The Asme, 135 [DOI] [Details]
(2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'
Farragher, TP,Scully, S,O'Dowd, NP,Leen, SB (2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'. International Journal Of Fatigue, 49 :50-61 [DOI] [Details]
(2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'
Tobi, ALM,Shipway, PH,Leen, SB (2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'. Tribology International, 58 :29-39 [DOI] [Details]
(2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'
Zhang, T,Harrison, NM,McDonnell, PF,McHugh, PE,Leen, SB (2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'. Tribology International, 65 :113-127 [DOI] [Details]
(2013) 'An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue'
Barrett, RA,O'Donoghue, PE,Leen, SB (2013) 'An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue'. International Journal Of Fatigue, 48 :192-204 [DOI] [Details]
(2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'
McCarthy, OJ,McGarry, JP,Leen, SB (2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'. Wear, 305 :100-114 [DOI] [Details]
(2013) 'Influence of statistical size effects on the plastic deformation of coronary stents'
Grogan, JA,Leen, SB,McHugh, PE (2013) 'Influence of statistical size effects on the plastic deformation of coronary stents'. Journal Of The Mechanical Behavior Of Biomedical Materials, 20 :61-76 [DOI] [Details]
(2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'
Grogan, JA,Leen, SB,McHugh, PE (2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'. Biomaterials, 34 :8049-8060 [DOI] [Details]
(2013) 'Design of Composite Tidal Turbine Blades'
Grogan, D.M., Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) 'Design of Composite Tidal Turbine Blades'. Renewable Energy, 57 :151-162 [ARAN Link] [Details]
(2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'
Sweeney, C.A., Vorster, W., Leen, S.B., McHugh, P.E., Dunne, F.P.E. (2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'. Journal Of The Mechanics And Physics Of Solids, 61 :1224-1240 [Details]
(2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'
Zhang, T., Harrison, N.M., McDonnell, P.F., McHugh, P.E., Leen, S.B. (2013) 'A finite element methodology for wear-fatigue analysis for modular hip implants'. Tribology International, 65 :113-127 [Details]
(2013) 'A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites'
Kennedy, C.R., Ó Brádaigh, C.M and Leen, S.B. (2013) 'A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites'. Composite Structures, 106 :201-210 [ARAN Link] [Details]
(2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2013) 'Optimizing the design of a bioabsorbable metal stent using computer simulation methods'. Biomaterials, 34 (33):8049-8060 [Details]
(2013) 'Thermomechanical analysis of a pressurized plain pipe under realistic plant conditions'
Farragher, TP, O’Dowd, NP, Scully, S, Leen, SB (2013) 'Thermomechanical analysis of a pressurized plain pipe under realistic plant conditions'. Journal Of Pressure Vessel Technology, 135 (011204) [DOI] [ARAN Link] [Details]
(2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'
Mohd Tobi, A, Shipway, PH, Leen, SB (2013) 'Finite element modelling of brittle fracture of thick coatings under normal and tangential loading'. Tribology International, 58 [ARAN Link] [Details]
(2013) 'New strategy for the prediction of the gas pressure profile of superplastic forming of Al-5083 aluminium alloy'
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2013) 'New strategy for the prediction of the gas pressure profile of superplastic forming of Al-5083 aluminium alloy'. Materials Science Forum, 735 :204-209 [DOI] [Details]
(2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'
Farragher, TP, Scully, S, O’Dowd, NP, Leen, SB (2013) 'Development of life assessment procedures for power plant headers operated under flexible loading scenarios'. International Journal Of Fatigue, 49 :50-61 [DOI] [ARAN Link] [Details]
(2013) 'Finite element simulation of fretting wear and fatigue in thin steel wires'
Cruzado, A., Leen, S.B., Urchegui, M.A., Gómez, X (2013) 'Finite element simulation of fretting wear and fatigue in thin steel wires'. International Journal Of Fatigue, [DOI] [ARAN Link] [Details]
(2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'
O. J. McCarthy, J. P. McGarry, S. B. Leen (2013) 'Microstructure-sensitive prediction and experimental validation of fretting fatigue'. Wear, 305 :100-114 [DOI] [ARAN Link] [Details]
(2013) 'An improved unified viscoplastic model for strain-rate sensitivity in high temperature fatigue'
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) 'An improved unified viscoplastic model for strain-rate sensitivity in high temperature fatigue'. International Journal Of Fatigue, 48 :192-204 [DOI] [ARAN Link] [Details]
(2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'
Sweeney, CA;Vorster, W;Leen, SB;Sakurada, E;McHugh, PE;Dunne, FPE (2013) 'The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation'. Journal of the Mechanics and Physics of Solids, 61 :1224-1240 [DOI] [Details]
(2013) 'Design of composite tidal turbine blades'
Grogan, DM;Leen, SB;Kennedy, CR;Bradaigh, CMO (2013) 'Design of composite tidal turbine blades'. Renewable Energy, 57 :151-162 [DOI] [Details]
(2013) 'The influence of statistical size effects on the plastic deformation of coronary stents'
Grogan, J.A., Leen, S.B., McHugh, P.E. (2013) 'The influence of statistical size effects on the plastic deformation of coronary stents'. Journal Of Mechanical Behaviour Of Biomedical Materials, 20 :61-76 [Details]
(2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'
Grogan, JA,Leen, SB,McHugh, PE (2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'. Journal Of The Mechanical Behavior Of Biomedical Materials, 12 :129-138 [DOI] [ARAN Link] [Details]
(2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'
Kennedy, CR,Leen, SB,Bradaigh, CMO (2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 226 :203-218 [DOI] [ARAN Link] [Details]
(2012) 'Comparison study of two constitutive equations for Al-5083 superplastic aluminium alloy'
Otegi, N,Galdos, L,Hurtado, I,Leen, SB (2012) 'Comparison study of two constitutive equations for Al-5083 superplastic aluminium alloy'. Materialwissenschaft Und Werkstofftechnik, 43 :780-785 [DOI] [Details]
(2012) 'Micromechanical methodology for fatigue in cardiovascular stents'
Sweeney, C.A., McHugh, P.E., McGarry, J.P., Leen, S.B. (2012) 'Micromechanical methodology for fatigue in cardiovascular stents'. International Journal Of Fatigue, 44 :202-216 [Details]
(2012) 'Comparison study of two constitutive equations for Al-5083 aluminium alloy'
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2012) 'Comparison study of two constitutive equations for Al-5083 aluminium alloy'. Materialwissenschaft Und Werkstofftechnik (Materials Science And Engineering Technology), 43 (9):780-785 [DOI] [Details]
(2012) 'Micromechanical methodology for fatigue in cardiovascular stents'
Sweeney, CA;McHugh, PE;McGarry, JP;Leen, SB (2012) 'Micromechanical methodology for fatigue in cardiovascular stents'. International Journal Of Fatigue, 44 :202-216 [DOI] [Details]
(2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'
Grogan, JA;Leen, SB;McHugh, PE (2012) 'Comparing coronary stent material performance on a common geometric platform through simulated bench testing'. Journal Of The Mechanical Behavior Of Biomedical Materials, 12 :129-138 [DOI] [Details]
(2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'
Kennedy, CR;Leen, SB;Bradaigh, CMO (2012) 'A preliminary design methodology for fatigue life prediction of polymer composites for tidal turbine blades'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 226 :203-218 [DOI] [Details]
(2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'
Zhang, T,McHugh, PE,Leen, SB (2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'. International Journal Of Fatigue, 44 :260-272 [DOI] [Details]
(2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'
Zhang, T., McHugh, P.E., Leen, S.B. (2012) 'Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue'. International Journal Of Fatigue, 44 :260-272 [Details]
(2011) 'Gross slip wear performance of a layered thin W-DLC coating: damage mechanisms and life modelling'
Mohd Tobi, A, Shipway, PH, Leen, SB (2011) 'Gross slip wear performance of a layered thin W-DLC coating: damage mechanisms and life modelling'. Wear, [ARAN Link] [Details]
(2011) 'A corrosion model for bioabsorbable metallic stents'
Grogan, JA;O'Brien, BJ;Leen, SB;McHugh, PE (2011) 'A corrosion model for bioabsorbable metallic stents'. Acta Biomaterialia, 7 :3523-3533 [DOI] [Details]
(2011) 'Predicting instability in superplastic forming of metals'
Leen, SB (2011) 'Predicting instability in superplastic forming of metals'. Superplastic Forming Of Advanced Metallic Materials: Methods And Applications, :184-223 [Details]
(2011) 'Predicting instability in superplastic forming of metals'
Leen, SB,Giuliano, G (2011) 'Predicting instability in superplastic forming of metals'. Superplastic Forming Of Advanced Metallic Materials: Methods And Applications, :184-223 [Details]
(2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'
Ding, J,Houghton, D,Williams, EJ,Leen, SB (2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'. International Journal Of Fatigue, 33 :332-342 [DOI] [Details]
(2011) 'A corrosion model for bioabsorbable metallic stents'
Grogan, JA,O'Brien, BJ,Leen, SB,McHugh, PE (2011) 'A corrosion model for bioabsorbable metallic stents'. Acta Biomaterialia, 7 :3523-3533 [DOI] [Details]
(2011) 'Computational study on the effect of contact geometry on fretting behaviour'
Zhang, T, McHugh, P.E., Leen, S.B. (2011) 'Computational study on the effect of contact geometry on fretting behaviour'. Wear, [ARAN Link] [Details]
(2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'
Ding, J, Houghton, D, Williams, EJ, Leen, SB (2011) 'Simple parameters to predict effect of surface damage on fretting fatigue'. International Journal of Fatigue, 33 :332-342 [DOI] [Details]
(2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'
McCarthy, OJ;McGarry, JP;Leen, SB (2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'. Computational Materials Science, 50 :2439-2458 [DOI] [Details]
(2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'
McCarthy, O.J., McGarry, J.P., Leen, S.B. (2011) 'A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting'. Computational Materials Science, 50 (8):2439-2458 [ARAN Link] [Details]
(2010) 'Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy'
Deshpande, A, Leen, SB, Hyde, TH (2010) 'Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy'. ASME J Manufacturing Science and Engineering, (132) [DOI] [ARAN Link] [Details]
(2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'
Deshpande, AA;Leen, SB;Sun, W;Hyde, TH (2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'. International Journal Of Material Forming, 3 :1151-1154 [DOI] [Details]
(2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'
Deshpande, AA;Leen, SB;Hyde, TH (2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'. Journal Of Materials Engineering And Performance, 19 :452-466 [DOI] [Details]
(2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'
Bennett, CJ;Leen, SB;Shipway, PH (2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'. International Journal Of Material Forming, 3 :1155-1158 [DOI] [Details]
(2010) 'Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy (vol 132, 051013, 2010)'
Deshpande, AA;Leen, SB;Hyde, TH (2010) 'Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy (vol 132, 051013, 2010)'. Journal Of Manufacturing Science And Engineering-Transactions Of The Asme, 132 [Details]
(2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'
Davis, T;Ding, J;Sun, W;Leen, SB (2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 224 :41-50 [DOI] [Details]
(2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'
Bennett, CJ;Leen, SB;Williams, EJ;Shipway, PH;Hyde, TH (2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'. Computational Materials Science, 50 :125-137 [DOI] [Details]
(2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'
Bennett, CJ,Leen, SB,Shipway, PH (2010) 'A FINITE ELEMENT ANALYSIS OF ERRORS IN AXISYMMETRIC ISOTHERMAL AND GLEEBLE COMPRESSION TESTING OF Ti-6Al-4V'. Int J Mater Form, 3 :1155-1158 [DOI] [Details]
(2010) 'A three-dimensional numerical study of fatigue crack growth using remeshing techniques'
Maligno, A.R. Rajaratnam, S, Leen, S.B., Williams, E.J. (2010) 'A three-dimensional numerical study of fatigue crack growth using remeshing techniques'. Engng Fract Mechs, 77 :94-111 [DOI] [Details]
(2010) 'Cyclic thermo-mechanical material modelling and testing of 316 stainless steel'
Hyde, CJ,Sun, W,Leen, SB (2010) 'Cyclic thermo-mechanical material modelling and testing of 316 stainless steel'. International Journal Of Pressure Vessels And Piping, 87 :365-372 [DOI] [ARAN Link] [Details]
(2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'
Deshpande, AA,Leen, SB,Hyde, TH (2010) 'Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool'. Journal Of Materials Engineering And Performance, 19 :452-466 [DOI] [ARAN Link] [Details]
(2010) 'Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy'
Leen, SB,Deshpande, A,Hyde, TH (2010) 'Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy'. Journal Of Manufacturing Science And Engineering-Transactions Of The Asme, 132 [DOI] [Details]
(2010) 'The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems'
A. L. Mohd Tobi, J. Ding, S Pearson, S. B. Leen, P. H. Shipway (2010) 'The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems'. Tribology International, 43 :1917-1932 [DOI] [Details]
(2010) 'Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies'
Leen, S.B., Deshpande, A., Hyde, T.H. (2010) 'Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies'. Key Engineering Materials, 433 :247-256 [DOI] [Details]
(2010) 'A holistic approach on structural integrity of high temperature welds in power plants'
Hyde, TH, Sun, W, Becker, AA, Leen, SB, Shipway, PH, Thomson, RC, Yaghi, AH, Sanchez-Hanton, J (2010) 'A holistic approach on structural integrity of high temperature welds in power plants'. Energy Materials, 4 (1):17-22 [DOI] [Details]
(2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'
Deshpande, AA,Leen, SB,Sun, W,Hyde, TH (2010) 'THERMO-MECHANICAL ANALYSIS AND LIFING OF Ni-Cr SPF TOOL'. Int J Mater Form, 3 :1151-1154 [DOI] [Details]
(2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'
Davis, T., Ding, J., Sun, W. and Leen, S.B (2010) 'Computational simulation of the relaxation of local stresses due to foreign object damage under cyclic loading'. Proceedings Of The Institution Of Mechanical Engineers, Part L: Journal Of Materials Design & Applications, 224 :41-50 [DOI] [Details]
(2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'
Bennett, CJ,Leen, SB,Williams, EJ,Shipway, PH,Hyde, TH (2010) 'A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing'. Computational Materials Science, 50 :125-137 [DOI] [ARAN Link] [Details]
(2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'
Hyde, TH;Sun, W;Yaghi, AH;Leen, SB (2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :926-935 [DOI] [Details]
(2009) 'Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V'
Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V'. Tribology International, 42 :1651-1662 [Details]
(2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'
Leen, SB;Stoyanov, M (2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'. International Journal Of Material Forming, 2 :287-290 [DOI] [Details]
(2009) 'A multiaxial fretting fatigue test for spline coupling contact'
Wavish, PM;Houghton, D;Ding, J;Leen, SB;Williams, EJ;McColl, IR (2009) 'A multiaxial fretting fatigue test for spline coupling contact'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :325-345 [DOI] [Details]
(2009) 'Multiaxial fretting fatigue testing and prediction for splined couplings'
Houghton, D., Wavish, P. M., Williams, E. J. & Leen, S. B. (2009) 'Multiaxial fretting fatigue testing and prediction for splined couplings'. International Journal of Fatigue, [Details]
(2009) 'Characterisation of fretting-induced wear debris for Ti-6Al-4V'
Everitt, N., Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'Characterisation of fretting-induced wear debris for Ti-6Al-4V'. Wear, 267 :283-291 [Details]
(2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'
Leen, SB,Stoyanov, M (2009) 'FINITE ELEMENT MODELLING OF DAMAGE IN SUPERPLASTIC FORMING OF A TITANIUM ALLOY'. Int J Mater Form, 2 :287-290 [DOI] [ARAN Link] [Details]
(2009) 'An multi-scale model for fretting wear with oxidation-debris effects'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2009) 'An multi-scale model for fretting wear with oxidation-debris effects'. Proc Instn Mech. Engrs, Part J: J. Engineering Tribology, 223 (7):1019-1031 [Details]
(2009) 'An anisotropic creep damage model for anisotropic weld metal'
Peravali, S., Hyde, T. H., Cliffe, K. A. and Leen, S. B. (2009) 'An anisotropic creep damage model for anisotropic weld metal'. Trans Asme, Journal Of Pressure Vessel Technology, [Details]
(2009) 'A fretting fatigue test for spline coupling contact'
Wavish, P. M., Houghton, D., Ding, K., Leen, S. B., McColl, I. R. & Williams, E. J. (2009) 'A fretting fatigue test for spline coupling contact'. Fatigue & Fracture of Engineering Materials & Structures, [Details]
(2009) 'A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V'
Mohd Tobi, L., Ding, J., Bandak, G., Leen, S. B. & Shipway, P. H. (2009) 'A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V'. Wear, 267 :270-282 [Details]
(2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'
Hyde, TH,Sun, W,Yaghi, AH,Leen, SB (2009) 'Some issues on structural integrity analysis of P91 welds in power plants subjected to high temperature creep*'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :926-935 [DOI] [Details]
(2009) 'A multiaxial fretting fatigue test for spline coupling contact'
Wavish, PM,Houghton, D,Ding, J,Leen, SB,Williams, EJ,McColl, IR (2009) 'A multiaxial fretting fatigue test for spline coupling contact'. Fatigue & Fracture Of Engineering Materials & Structures, 32 :325-345 [DOI] [Details]
(2008) 'A methodology for modelling the effects of nitriding on fatigue life'
Hyde, T. R., Leen, S. B. & McColl, I. R. (2008) 'A methodology for modelling the effects of nitriding on fatigue life'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 222 (L1):1-14 [Details]
(2008) 'Failure prediction for titanium alloys using a superplastic forming limit diagram'
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2008) 'Failure prediction for titanium alloys using a superplastic forming limit diagram'. Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), 39 (04-May):327-331 [Details]
(2008) 'Finite element simulation of fretting wear-fatigue interaction in spline couplings'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) 'Finite element simulation of fretting wear-fatigue interaction in spline couplings'. Tribology, 2 (1):10-24 [Details]
(2008) 'An oxidation-debris model for fretting wear simulation'
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) 'An oxidation-debris model for fretting wear simulation'. Proc Instn Mech. Engrs, Part J: J. Engineering Tribology, [Details]
(2008) 'Finite element based predictions for life-limiting behaviour for large SPF tools'
Deshpande, A., Leen, S. B. & Hyde, T. H. (2008) 'Finite element based predictions for life-limiting behaviour for large SPF tools'. Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), 39 (04-May):309-316 [Details]
(2008) 'Development and use of an anisotropic damage model for the high-temperature life assessment of a P91 weldment'
Peravali, S., Hyde, T. H., Cliffe, K. A. and Leen, S. B. (2008) 'Development and use of an anisotropic damage model for the high-temperature life assessment of a P91 weldment'. Journal of Strain Analysis, 43 (5):361-382 [Details]
(2008) 'A combined wear and crack nucleation-propagation methodology for fretting fatigue life prediction'
Madge, J. J., Leen, S. B. & Shipway, P. H. (2008) 'A combined wear and crack nucleation-propagation methodology for fretting fatigue life prediction'. International Journal of Fatigue, 30 :1509-1528 [Details]
(2007) 'Residual stresses in HVOF sprayed coatings - modelling the effect of spray parameters'
Bansal, P., Shipway, P. & Leen, S. B. (2007) 'Residual stresses in HVOF sprayed coatings - modelling the effect of spray parameters'. Acta Materialia, 55 :5089-5101 [Details]
(2007) 'A finite element based approach to simulating the effects of debris on fretting wear'
Ding, J., McColl, I. R. & Leen, S. B. (2007) 'A finite element based approach to simulating the effects of debris on fretting wear'. Wear, 263 :481-491 [Details]
(2007) '“The critical role of fretting wear in the analysis of fretting fatigue'
Madge, JJ, Leen, SB, Shipway, PH (2007) '“The critical role of fretting wear in the analysis of fretting fatigue'. Wear, 263 :542-551 [Details]
(2007) 'The application of fretting wear modelling to a spline coupling'
Ding, J, McColl, I.R., Leen, S.B (2007) 'The application of fretting wear modelling to a spline coupling'. Wear, 262 :1205-1216 [Details]
(2007) 'A hybrid implicit-explicit FE methodology for coating formation in the high velocity oxy-fuel spraying process'
Bansal, P., Shipway, P. H. & Leen, S. B. (2007) 'A hybrid implicit-explicit FE methodology for coating formation in the high velocity oxy-fuel spraying process'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L4):285-298 [Details]
(2007) 'The effect of weld metal anisotropy on the creep of a pressurized, circumferentially welded pipe'
Hyde, T. H., Peravali, S. & Leen, S. B. (2007) 'The effect of weld metal anisotropy on the creep of a pressurized, circumferentially welded pipe'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L2):77-92 [Details]
(2007) 'Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings'
Houghton, D., Wavish, P. M., Leen, S. B. & Williams, E. J. (2007) 'Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings'. Applied Mechanics and Materials, 7-8 :37-42 [Details]
(2007) 'Fretting fatigue predictions in a complex coupling'
Ding, J., Sum, W., Rajaratnam, S., Leen, S. B., McColl, I. R. & Williams, E. J. (2007) 'Fretting fatigue predictions in a complex coupling'. International Journal of Fatigue, 29 :1229-1244 [Details]
(2007) 'A superplastic forming limit diagram concept for Ti-6Al-4V'
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2007) 'A superplastic forming limit diagram concept for Ti-6Al-4V'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 221 (L4):251-264 [Details]
(2007) 'Application of notch strain techniques to elastic-plastic and elastic-plastic-creep behaviour of complex structures'
Sabesan, R., Leen, S. B. & Hyde, T. H. (2007) 'Application of notch strain techniques to elastic-plastic and elastic-plastic-creep behaviour of complex structures'. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 221 :235-252 [Details]
(2007) 'Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude'
Madge, J. J, McColl, I. R. & Leen, S. B. (2007) 'Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude'. Wear, 262 :1159-1170 [Details]
(2006) 'Finite element modelling of the fracture behaviour of brittle coatings'
Bansal, P., Shipway, P. H. & Leen, S. B. (2006) 'Finite element modelling of the fracture behaviour of brittle coatings'. Surface & Coatings Technology, 200 :5318-5327 [Details]
(2006) 'Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis'
Pan, W., Leen, S. B. & Hyde, T. H. (2006) 'Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis'. Computers & Structures, 84 :690-698 [Details]
(2006) 'Towards the modelling of fretting wear and fatigue interaction in spline couplings'
Ding, K, Madge, JJ, Leen, SB, Williams, EJ (2006) 'Towards the modelling of fretting wear and fatigue interaction in spline couplings'. Applied Mechanics And Materials, 5-6 :165-172 [Details]
(2006) 'Experimental validation of FE predicted fracture behaviour of thermally sprayed coatings'
Bansal, P, Shipway, P, Leen, SB, Driver, LC (2006) 'Experimental validation of FE predicted fracture behaviour of thermally sprayed coatings'. Materials Science And Engineering, 430 :104-112 [Details]
(2006) 'A finite element based methodology for predicting the thermo-mechanical behaviour of superplastic forming tools'
Shang, J., Leen, S. B. & Hyde, T. H. (2006) 'A finite element based methodology for predicting the thermo-mechanical behaviour of superplastic forming tools'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 220 (L3):113-115 [Details]
(2006) 'Effect of particle impact on residual stress development in HVOF sprayed coatings'
Bansal, P., Shipway, P. & Leen, S. B. (2006) 'Effect of particle impact on residual stress development in HVOF sprayed coatings'. Journal of Thermal Spray Technology, 15 (4):570-575 [Details]
(2006) 'Finite element based life prediction for high temperature cyclic loading of a large superplastic forming die'
Shang, J., Hyde, T.H., Leen, S.B (2006) 'Finite element based life prediction for high temperature cyclic loading of a large superplastic forming die'. Journal Of Strain Analysis, 401 (8):539-559 [Details]
(2005) 'Finite element, critical-plane fatigue life prediction of simple and complex contact configurations'
Sum,W. S., Williams, E. J. & Leen, S. B. (2005) 'Finite element, critical-plane fatigue life prediction of simple and complex contact configurations'. International Journal of Fatigue, 27 :403-416 [Details]
(2005) 'A sigmoidal model for superplastic deformation'
Pan, W., Krohn, M., Leen, S. B., Hyde, T. H. & Walloe, S. (2005) 'A sigmoidal model for superplastic deformation'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L3):149-162 [Details]
(2005) 'Parametric analysis of stresses in welded branched pipes under creep conditions'
Rayner, G., Hyde, T. H., Leen, S. B. & Sun, W. (2005) 'Parametric analysis of stresses in welded branched pipes under creep conditions'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L4):231-248 [Details]
(2005) 'Design of a multi-axial test specimen for fretting fatigue in splined couplings'
Wavish, P., McColl, I. R. & Leen, S. B. (2005) 'Design of a multi-axial test specimen for fretting fatigue in splined couplings'. Applied Mechanics and Materials, 40636 :267-272 [Details]
(2005) 'Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units'
1) Leen, SB, Hyde, TH, Rajaratnam, S and Pan, W (2005) 'Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units'. Key Engineering Materials, 293-294 :261-268 [Details]
(2005) 'A simplified fretting test methodology for complex shaft couplings'
Hyde, T. R., Leen, S. B. & McColl, I. R. (2005) 'A simplified fretting test methodology for complex shaft couplings'. Fatigue & Fracture of Engineering Materials & Structures, 28 :1047-1067 [Details]
(2005) 'Efficient finite element modelling for complex shaft couplings under non-symmetric loading'
Sum, W., Leen, S. B., Williams, E. J., Rajaratnam, S. & McColl, I. R. (2005) 'Efficient finite element modelling for complex shaft couplings under non-symmetric loading'. Journal of Strain Analysis, 40 (7):655-673 [Details]
(2005) 'Approximate prediction methods for multiaxial notch stresses and strains under elastic-plastic and creep conditions'
Hyde, T. H., Sabesan, R. & Leen, S. B. (2005) 'Approximate prediction methods for multiaxial notch stresses and strains under elastic-plastic and creep conditions'. Journal of Strain Analysis, 40 (6):535-548 [Details]
(2005) 'Anisotropic creep behaviour of Bridgman notch specimens'
Hyde, T. H., Jones, I. A., Peravali, S., Sun, W., Wang, J. G. & Leen, S. B. (2005) 'Anisotropic creep behaviour of Bridgman notch specimens'. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design & Applications, 219 (L3):163-175 [Details]
(2004) 'Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling'
Ratsimba, C. H. H., McColl, I. R., Williams, E. J., Leen, S. B. & Soh, H. (2004) 'Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling'. Wear, 257 :1193-1206 [Details]
(2004) 'Finite element simulation and experimental validation of fretting wear'
McColl, I. R., Ding, K. & Leen, S. B. (2004) 'Finite element simulation and experimental validation of fretting wear'. Wear, 256 (11-Dec):1114-1127 [Details]
(2004) 'Approximate prediction methods for notch stresses and strains under elastic-plastic and creep conditions'
Hyde, T. H., Rajaratnam, S. & Leen, S. B. (2004) 'Approximate prediction methods for notch stresses and strains under elastic-plastic and creep conditions'. Journal of Strain Analysis, 39 (5):515-527 [Details]
(2004) 'The effect of slip regime on fretting wear-induced stress evolution'
Ding, K., Leen, S.B. and McColl, I.R. (2004) 'The effect of slip regime on fretting wear-induced stress evolution'. International Journal Of Fatigue, [Details]
(2004) 'The measurement of friction for superplastic forming of Ti-6Al-4V'
Kelly, R.B., Leen, S.B., Pashby, I.R, Kennedy, A.R., (2004) 'The measurement of friction for superplastic forming of Ti-6Al-4V'. Materials Science Forum, 447-448 :111-116 [Details]
(2003) 'Fatigue life prediction for a barrelled splined coupling under torque overload'
Leen, S. B., Ratsimba, C. H. H., McColl, I. R. and Williams, E. J. (2003) 'Fatigue life prediction for a barrelled splined coupling under torque overload'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 217 (G3):123-142 [Details]
(2003) 'Parametric study on the frictional contact behaviour between spline teeth'
Sum, W. S., Leen, S. B. & Williams, E. J. (2003) 'Parametric study on the frictional contact behaviour between spline teeth'. Materials Science Forum, 440-441 :69-76 [Details]
(2003) 'Simplified method to predict elastic-plastic behaviour of aeroengine casings'
Sabesan, R., Leen, S. B., Hyde, T. H. (2003) 'Simplified method to predict elastic-plastic behaviour of aeroengine casings'. Key Engineering Materials, Vols. 245-246 :373-380 [Details]
(2002) 'An investigation of the fatigue and fretting performance of a representative aeroengine splined coupling'
Leen, S. B., Hyde, T. H., Ratsimba, C. H. H., Williams, E. J. and McColl, I. R. (2002) 'An investigation of the fatigue and fretting performance of a representative aeroengine splined coupling'. Journal of Strain Analysis, Special Issue: Fretting Fatigue, 37 (6):565-583 [Details]
(2001) 'Macroscopic fretting variables in a splined coupling under combined torque and axial load'
Leen, S. B., Richardson, I. J., McColl, I. R., Williams, E. J. and Hyde, T. R. (2001) 'Macroscopic fretting variables in a splined coupling under combined torque and axial load'. Journal of Strain Analysis, 36 (5):481-499 [Details]
(2000) 'On the prediction of elastic-plastic generalised load-displacement responses for tubular joints'
Leen, S. B. and Hyde, T. H. (2000) 'On the prediction of elastic-plastic generalised load-displacement responses for tubular joints'. Journal of Strain Analysis, 35 (3):205-220 [Details]
(2000) 'Development of a representative test specimen for frictional contact in splined joint couplings'
Leen, S. B., Hyde, T. R., Williams, E. J., Becker, A. A., McColl, I. R., Hyde, T. H. and Taylor, J. W. (2000) 'Development of a representative test specimen for frictional contact in splined joint couplings'. Journal of Strain Analysis, 35 (6):521-544 [Details]
(1999) 'An experimental and finite element study on the non-linear force-displacement characteristics of tubular YT-joints under combined axial loading'
Leen, S. B. and Hyde, T. H. (1999) 'An experimental and finite element study on the non-linear force-displacement characteristics of tubular YT-joints under combined axial loading'. Journal of Strain Analysis, 34 (3):183-207 [Details]
(1999) 'Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes'
Leen, S. B. and Hyde, T. H. (1999) 'Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes'. Journal of International Association for Shell & Spatial Structures, 40 (1):43-55 [Details]
(1997) 'Prediction of elastic-plastic displacements of tubular joints using an energy-based approach'
Leen, S. B. and Hyde, T. H. (1997) 'Prediction of elastic-plastic displacements of tubular joints using an energy-based approach'. Journal of Strain Analysis, 32 (6):435-454 [Details]

Book Chapters

  Year Publication
(2018) 'Influence of Composite Fatigue Properties on Marine Tidal Turbine Blade Design'
Jaksic, V;Kennedy, CR;Grogan, DM;Leen, SB;Bradaigh, CMO (2018) 'Influence of Composite Fatigue Properties on Marine Tidal Turbine Blade Design' In: Durability of Composites in a Marine Environment 2. Solid Mechanics and Its Applications. DORDRECHT: SPRINGER. [DOI] [Details]
(2013) 'Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel'
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) 'Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel' In: Advanced Materials Modelling for Structures. Berlin Heidelberg: Springer-Verlag. [DOI] [Details]
(2011) 'Analysis of instability during superplastic deformation'
Leen, S B (2011) 'Analysis of instability during superplastic deformation' In: Superplastic Forming in Advanced Metallic Materials : methods and applications. Cambridge, UK: Woodhead Publishing Ltd. [Details]
(2000) 'Combining Rapid Prototyping, Optical Field View Measurement Techniques and Finite Element Analysis to Test Structural Integrity of Tubular Joints'
C Wykes, S Leen, C Buckberry (2000) 'Combining Rapid Prototyping, Optical Field View Measurement Techniques and Finite Element Analysis to Test Structural Integrity of Tubular Joints' In: Interferometry in Speckle Light. Heidelberg, Germany: Springer Berlin Heidelberg. [DOI] [Details]

Conference Publications

  Year Publication
BioEngineering in Ireland
Grogan, J, O'Brien, B, Leen, S.B., McHugh, P.E., Computational and experimental analysis of the physical performance of biodegradable metallic stents BioEngineering in Ireland [Details]
(2019) PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 4
Devaney, RJ;Connaire, A;O'Donoghue, PE;Leen, SB (2019) PROCESS-STRUCTURE-PROPERTY FATIGUE CHARACTERISATION FOR WELDING OF X100 STEEL CATENARY RISERS PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 4 [Details]
(2019) PROCESS-STRUCTURE-PROPERTY FATIGUE CHARACTERISATION FOR WELDING OF X100 STEEL CATENARY RISERS
Devaney, RJ,Connaire, A,O'Donoghue, PE,Leen, SB, (2019) PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 4 PROCESS-STRUCTURE-PROPERTY FATIGUE CHARACTERISATION FOR WELDING OF X100 STEEL CATENARY RISERS [Details]
(2018) Civil Engineering Research Ireland (CERI) 2018
Mannion B, Nash S, Leen S (2018) Double multiple stream-tube model for high solidity vertical axis tidal turbines Civil Engineering Research Ireland (CERI) 2018 [Details]
(2018) Cyclic plasticity and low cycle fatigue damage characterisation of thermally simulated X100Q heat affected zone
Devaney, RJ,Oesterlin, H,O'Donoghue, PE,Leen, SB,Henaff, G (2018) 12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) Cyclic plasticity and low cycle fatigue damage characterisation of thermally simulated X100Q heat affected zone [DOI] [Details]
(2018) 12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018)
Devaney, RJ;Oesterlin, H;O'Donoghue, PE;Leen, SB (2018) Cyclic plasticity and low cycle fatigue damage characterisation of thermally simulated X100Q heat affected zone 12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) [DOI] [Details]
(2018) 37th International Conference on Ocean, Offshore & Arctic Engineering
Mannion B, Leen SB, McCormack V, Nash S (2018) Numerical Modelling of a Variable-Pitch, Vertical Axis Tidal Turbine Incorporating Flow Acceleration 37th International Conference on Ocean, Offshore & Arctic Engineering [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2018) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2018) The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , pp.2288-2304 [DOI] [Details]
(2017) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 6A
Mac Ardghail, P;Barrett, RA;Harrison, N;Leen, SB (2017) PREDICTIONS OF ICHAZ CYCLIC THERMO-MECHANICAL RESPONSE IN GTAW PROCESS FOR 9CR STEELS PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 6A [Details]
(2017) 44th Leeds-Lyon Symposium
Ashton, PJ, O'Halloran, S, Harte, AM, Leen, SB (2017) Microstructure sensitivity of fretting crack nucleation for ferretic-pearlitic steel 44th Leeds-Lyon Symposium Lyon, , 04-SEP-17 - 06-SEP-17 [Details]
(2017) A COMBINED CREEP AND FATIGUE DAMAGE ESTIMATION TOOL FOR POWER-PLANT MONITORING
Harrison, NM,Adams, A,O'Donoghue, PE,Leen, SB,Ren, W,Zhu, XK,Duncan, A (2017) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6B A COMBINED CREEP AND FATIGUE DAMAGE ESTIMATION TOOL FOR POWER-PLANT MONITORING [Details]
(2017) European Wave and Tidal Energy Conference, Cork, Ireland
Heavey, S.; McGarry, J.P.; Leen, S.B. (2017) Hydrodynamic Modelling of a Vertical Axis Tidal Turbine Using CFD and BEM Methods European Wave and Tidal Energy Conference, Cork, Ireland Cork, Ireland, [Details]
(2017) 44th Leeds-Lyon Symposium
O'Halloran, SM, Harte, AM, Connaire, AD, Leen, SB (2017) Development of a piezoelectrically-actuated fretting wear test rig for pressure armour layer nub-groove contact 44th Leeds-Lyon Symposium Lyon, , 04-SEP-17 - 06-SEP-17 [Details]
(2017) IUTAM 2017 - Multi-scale Fatigue, Fracture & Damage of Materials in Harsh Environments
Ashton, PJ,O’Halloran S, A.M. Harte, AM, Leen, SB (2017) Experimental characterisation and computational modelling of ferritic-pearlitic steel for fatigue in flexible risers . In: Leen, SB, O'Donoghue, P eds. IUTAM 2017 - Multi-scale Fatigue, Fracture & Damage of Materials in Harsh Environments Galway, , 28-AUG-17 - 01-SEP-17 [Details]
(2017) PREDICTIONS OF ICHAZ CYCLIC THERMO-MECHANICAL RESPONSE IN GTAW PROCESS FOR 9CR STEELS
Mac Ardghail, P,Barrett, RA,Harrison, N,Leen, SB,Zhu, XK,Brongers, M,Qian, H (2017) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 6A PREDICTIONS OF ICHAZ CYCLIC THERMO-MECHANICAL RESPONSE IN GTAW PROCESS FOR 9CR STEELS [Details]
(2017) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
O'Hara, EM;Harrison, NM;Polomski, BK;Barrett, RA;Leen, SB (2017) Fatigue damage characterisation of MarBN steel for high temperature flexible operating conditions PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , pp.23-37 [DOI] [Details]
(2017) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
Li, M;Sun, FW;Barrett, RA;Meade, E;Li, DF;O'Donoghue, PE;Leen, SB;O'Dowd, NP (2017) Influence of material inhomogeneity on the mechanical response of a tempered martensite steel PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , pp.14-22 [DOI] [Details]
(2017) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6B
Harrison, NM;Adams, A;O'Donoghue, PE;Leen, SB (2017) A COMBINED CREEP AND FATIGUE DAMAGE ESTIMATION TOOL FOR POWER-PLANT MONITORING PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6B [Details]
(2016) 8th International Symposium on Fretting Fatigue
Ashton, PJ, Harte, AM, McHugh, PE, Sweeney, CA, Leen, SB (2016) Crystal plasticity modelling of statistical size effeccts in fretting crack initiation 8th International Symposium on Fretting Fatigue Brasilia, Brazil, , 17-APR-16 - 20-APR-16 [Details]
(2016) TRIBOLOGY INTERNATIONAL
O'Halloran, SM;Connaire, AD;Harte, AM;Leen, SB (2016) Modelling of fretting in the pressure armour layer of flexible marine risers TRIBOLOGY INTERNATIONAL , pp.306-316 [DOI] [Details]
(2016) International Conference on Materials Design and Applications
O’Hagan CP, Leen SB, Monaghan RFD (2016) Comparison of the Corrosion of P91 and 347 Steel During Biomass Co-Firing International Conference on Materials Design and Applications Porto, Portugal, [Details]
(2016) 26th International Ocean and Polar Engineering Conference, Rhodes, Greece
Heavey, S.; McGarry, J.P.; Leen, S.B. (2016) Analytical modelling of a novel tidal turbine 26th International Ocean and Polar Engineering Conference, Rhodes, Greece Rhodes, Greece, [Details]
(2016) International Conference in Ocean Energy (ICOE), Edinburgh, UK
Heavey, S.; McGarry, J.P.; Leen, S.B. (2016) Hydrodynamic model for a novel vertical axis tidal turbine concept International Conference in Ocean Energy (ICOE), Edinburgh, UK Edinburgh, UK, [Details]
(2016) 8th International Symposium on Fretting Fatigue
O'Halloran, SM, Harte, AM, Connaire, AD, Leen, SB (2016) Combined experimental-computational investigation of fretting in flexible marine risers 8th International Symposium on Fretting Fatigue Brasilia, Brazil, , 17-APR-16 - 20-APR-16 [Details]
(2015) ENERGY & FUELS
O'Hagan, CP;O'Brien, BJ;Griffin, F;Hooper, B;Leen, SB;Monaghan, RFD (2015) Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing ENERGY & FUELS , pp.3082-3095 [DOI] [Details]
(2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3
Leen, SB;Li, M;Barrett, RA;Scully, S;Joyce, D;O'Donoghue, PE (2015) HIGH TEMPERATURE, MULTI-MATERIAL, CYCLIC PLASTICITY OF A P91 WELDED BRANCH-HEADER CONNECTION UNDER CYCLIC PRESSURE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3 [Details]
(2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 6B
O'Hagan, CP;Barrett, RA;Leen, SB;Monaghan, RFD (2015) EFFECT OF HIGH TEMPERATURE CORROSION ON THE SERVICE LIFE OF P91 PIPING IN BIOMASS CO-FIRING ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 6B [Details]
(2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3
Barrett, RA;O'Hara, E;O'Donoghue, PE;Leen, SB (2015) HIGH TEMPERATURE LOW CYCLE FATIGUE BEHAVIOUR OF MARBN AT 600 degrees C ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3 [Details]
(2015) 18th Annual Sir Bernard Crossland Symposium 2015
O'Halloran, SM, Harte, AM, Connaire, AD, Leen, SB (2015) A framewrk for the fatigue design of flexible marine risers 18th Annual Sir Bernard Crossland Symposium 2015 University ofLimerick, Limerick, Ireland, , 29-APR-15 - 30-APR-15 [Details]
(2015) Proceedings of the ASME 2015 Pressure Vessels & Piping Conference
O'Hagan, C. P. and Barrett, R. A. and Leen, S. B. and Monaghan, R. F. D. (2015) EFFECT OF HIGH TEMPERATURE CORROSION ON THE SERVICE LIFE OF P91 PIPING IN BIOMASS CO-FIRING Proceedings of the ASME 2015 Pressure Vessels & Piping Conference [DOI] [Details]
(2015) Finite element based damage assessment of composite tidal turbine blades
Fagan, EM,Leen, SB,Kennedy, CR,Goggins, J, (2015) 11TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2015) Finite element based damage assessment of composite tidal turbine blades [DOI] [Details]
(2015) EFFECT OF HIGH TEMPERATURE CORROSION ON THE SERVICE LIFE OF P91 PIPING IN BIOMASS CO-FIRING
O'Hagan, CP,Barrett, RA,Leen, SB,Monaghan, RFD,Kerr, M,Rudland, D (2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 6B EFFECT OF HIGH TEMPERATURE CORROSION ON THE SERVICE LIFE OF P91 PIPING IN BIOMASS CO-FIRING [Details]
(2015) HIGH TEMPERATURE LOW CYCLE FATIGUE BEHAVIOUR OF MARBN AT 600 degrees C
Barrett, RA,O'Hara, E,O'Donoghue, PE,Leen, SB,Zhao, MX (2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3 HIGH TEMPERATURE LOW CYCLE FATIGUE BEHAVIOUR OF MARBN AT 600 degrees C [Details]
(2015) HIGH TEMPERATURE, MULTI-MATERIAL, CYCLIC PLASTICITY OF A P91 WELDED BRANCH-HEADER CONNECTION UNDER CYCLIC PRESSURE
Leen, SB,Li, M,Barrett, RA,Scully, S,Joyce, D,O'Donoghue, PE,Zhao, MX (2015) ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 3 HIGH TEMPERATURE, MULTI-MATERIAL, CYCLIC PLASTICITY OF A P91 WELDED BRANCH-HEADER CONNECTION UNDER CYCLIC PRESSURE [Details]
(2015) 36th IAHR World Congress
Mannion B, Leen S and Nash S (2015) Testing of a 1/20th scale model novel vertical axis tidal turbine 36th IAHR World Congress [Details]
(2015) 11th Int Conf on Damage Assessment of Structures (DAMAS 2015), Ghent University, Belgium
Fagan, EM, Leen, SB, Goggins, J, (2015) Finite element based damage assessment of composite tidal turbine blades. (won best paper award at DAMAS 2015) 11th Int Conf on Damage Assessment of Structures (DAMAS 2015), Ghent University, Belgium [Details]
(2015) 9th European Solid Mechanics Conference (ESMC 2015), Leganés-Madrid, Spain
Barrett, RA, Li, D, O’Donoghue, P.E., Leen, SB (2015) A microstructure-sensitive modelling framework for advanced high temperature materials in next generation power plant 9th European Solid Mechanics Conference (ESMC 2015), Leganés-Madrid, Spain [Details]
(2015) ASME PVP 2015, Boston Massachusetts, USA
O’Hagan, CP, Barrett, RA, Leen, SB, Monaghan, RFD (2015) Effect of high temperature corrosion on the service life of P91 piping in biomass co-firing ASME PVP 2015, Boston Massachusetts, USA [Details]
(2015) ASME PVP 2015, , Boston, Massachusetts, USA
Leen, S.B., Li, M., Barrett, R.A., Scully, S., Joyce, D., O’Donoghue, P.E. (2015) ‘High temperature, multi-material, cyclic plasticity of a P91 welded branch-header connection under cyclic pressure ASME PVP 2015, , Boston, Massachusetts, USA [Details]
(2015) ASME PVP 2015, Boston, Massachusetts, USA
Barrett, RA, O’Hara, E, O’Donoghue, P.E., Leen, SB (2015) High temperature, low cycle fatigue characterisation of MarBN at 600oC ASME PVP 2015, Boston, Massachusetts, USA [Details]
(2015) 11th European Wind and Tidal Energy Series Conference (EWTEC-11), Nantes, Frances
1) Fagan, EM, Yeung, RW, Leen, SB, Goggins, J (2015) Structural and hydrodynamics modelling of composite tidal turbine blades 11th European Wind and Tidal Energy Series Conference (EWTEC-11), Nantes, Frances [Details]
(2015) 15th International Conference on Computational and Experimental Engineering and Sciences (ICCES'15) Reno, NV, USA
O’Donoghue, P.E., Barrett, R.A., Hyde, C.J., Leen, SB (2015) Thermomechanical fatigue assessment of an ex-service P91 steel through an integrated programme of testing and analysis 15th International Conference on Computational and Experimental Engineering and Sciences (ICCES'15) Reno, NV, USA [Details]
(2015) 20th International Conference on Composite Materials, Copenhagen
Grogan, D.M., Leen, S.B., O’Bradaigh, C.M (2015) Characterisation of cryogenically cycled autoclave & ATL CF/PEEK laminates using 3-D X-ray CT 20th International Conference on Composite Materials, Copenhagen [Details]
(2015) 42nd Leeds-Lyon Symposium on Tribology, Lyon
O’Halloran, SM, Harte, AM, Connaire, AD, Leen, SB (2015) Modelling of fretting in the pressure armour layer of flexible marine risers 42nd Leeds-Lyon Symposium on Tribology, Lyon [Details]
(2015) 42nd Leeds-Lyon Symposium on Tribology, Lyon
Ashton, P.J., Sweeney, C.A., McHugh, P.E., Harte, A.M., Leen, SB (2015) Cyclic crystal plasticity modelling of fatigue with application to fretting 42nd Leeds-Lyon Symposium on Tribology, Lyon [Details]
(2015) AMSE 2015 Pressure Vessels & Piping Conference
O’Hagan CP, Barrett RA, Leen SB, Monaghan RFD (2015) Effect of high temperature corrosion on the service life of P91 piping in biomass co-firing AMSE 2015 Pressure Vessels & Piping Conference [Details]
(2014) 16th European Conference on Composite Materials (ECCM16, Seville, Spain
Kennedy, C, O’Bradaigh, C, Leen, S, (2014) Fatigue of glass fibre reinforced polymers for ocean energy 16th European Conference on Composite Materials (ECCM16, Seville, Spain [Details]
(2014) TRIBOLOGY INTERNATIONAL
McCarthy, OJ;McGarry, JP;Leen, SB (2014) The effect of grain orientation on fretting fatigue plasticity and life prediction TRIBOLOGY INTERNATIONAL , pp.100-115 [DOI] [Details]
(2014) 5th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Belgium
Li, D, Barrett, RA, O’Dowd, NP, Leen, SB, O’Donoghue, PE (2014) Bottom-up multiscale modelling of microstructural response in a P91 martensitic steel 5th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Belgium [Details]
(2014) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION
Farragher, TP;Scully, S;O'Dowd, NP;Leen, SB (2014) HIGH TEMPERATURE, LOW CYCLE FATIGUE CHARACTERISATION OF P91 WELD AND HEAT AFFECTED ZONE MATERIAL PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION [Details]
(2014) PAPERS OF THE 22ND EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY
O'Hagan, CP;O'Brien, BJ;Leen, SB;Monaghan, RFD (2014) EXPERIMENTAL CHARACTERISATION OF MATERIALS FOR BIOMASS CO-FIRING PAPERS OF THE 22ND EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY , pp.723-730 [DOI] [Details]
(2014) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION
Barrett, RA;O'Donoghue, PE;Leen, SB (2014) A UNIFIED VISCOPLASTIC MODEL FOR HIGH TEMPERATURE LOW CYCLE FATIGUE OF SERVICE-AGED P91 STEEL PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION [Details]
(2014) CERAI 2014, Belfast
1) P.E. O'Donoghue, R.A. Barrett, S. Reape, S. Scully, C.J. Hyde, S.B. Leen (2014) Thermo-mechanical fatigue in power plant steels: Enhanced numerical modelling with experimental validation CERAI 2014, Belfast [Details]
(2014) Civil Engineering Research in Ireland(CERI 2014)
O’Halloran, S, Leen, SB, Harte, AM (2014) Contact mechanics for fretting in flexible marine risers Civil Engineering Research in Ireland(CERI 2014) Belfast, UK, , 28-SEP-14 - 29-SEP-14 [Details]
(2014) Proceedings EU Biomass Combustion and Exhibition 2014, Congress Centre, Hamburg, Germany
O’Hagan, CP, Leen, SB, Monaghan, RFD (2014) Experimental characterisation of materials for biomass co-firing Proceedings EU Biomass Combustion and Exhibition 2014, Congress Centre, Hamburg, Germany , pp.723-730 [Details]
(2014) 1st International Conference on Mechanics of Composite Materials, Stony Brook University, Long Island, New York
D. M. Grogan, S. B. Leen, C. M. Ó Brádaigh (2014) Analysis of Microcracking and Permeability in CF/PEEK Linerless Cryogenic Tanks 1st International Conference on Mechanics of Composite Materials, Stony Brook University, Long Island, New York [Details]
(2014) European Mechanics of Materials Conference 9 (EMMC14), Gothenburg, Sweden
O’Halloran, S, Harte, AM, Leen, SB (2014) Wear of the pressure armour wire of flexible marine risers European Mechanics of Materials Conference 9 (EMMC14), Gothenburg, Sweden [Details]
(2014) International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA
Barrett, RA, Li, D, Golden, BJ, O’Dowd, NP, O’Donoghue, PE, Leen, SB (2014) Microstructure sensitive modelling of high temperature fatigue in 9-12 Cr steels International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA [Details]
(2014) 24th International Workshop on Computational Micromechanics of Materials (IWCMM4), , Madrid, Spain
Sweeney, CA, O’Brien, B., McHugh, PE, Leen, SB (2014) Micromechanical modelling of crack initiation in HCF of a CoCr alloy 24th International Workshop on Computational Micromechanics of Materials (IWCMM4), , Madrid, Spain [Details]
(2014) PAPERS OF THE 22ND EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY
O'Hagan, C. P. and O'Brien, B. J. and Leen, S. B. and Monaghan, R. F. D. (2014) EXPERIMENTAL CHARACTERISATION OF MATERIALS FOR BIOMASS CO-FIRING . In: Hoffman, C and Baxter, D and Maniatis, K and Grassi, A and Helm, P eds. PAPERS OF THE 22ND EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY , pp.723-730 [Details]
(2014) HIGH TEMPERATURE, LOW CYCLE FATIGUE CHARACTERISATION OF P91 WELD AND HEAT AFFECTED ZONE MATERIAL
Farragher, TP,Scully, S,O'Dowd, NP,Leen, SB,Shim, DJ,Rudland, D (2014) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION HIGH TEMPERATURE, LOW CYCLE FATIGUE CHARACTERISATION OF P91 WELD AND HEAT AFFECTED ZONE MATERIAL [Details]
(2014) EXPERIMENTAL CHARACTERISATION OF MATERIALS FOR BIOMASS CO-FIRING
O'Hagan, CP,O'Brien, BJ,Leen, SB,Monaghan, RFD,Hoffman, C,Baxter, D,Maniatis, K,Grassi, A,Helm, P (2014) PAPERS OF THE 22ND EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY EXPERIMENTAL CHARACTERISATION OF MATERIALS FOR BIOMASS CO-FIRING , pp.723-730 [Details]
(2014) A UNIFIED VISCOPLASTIC MODEL FOR HIGH TEMPERATURE LOW CYCLE FATIGUE OF SERVICE-AGED P91 STEEL
Barrett, RA,O'Donoghue, PE,Leen, SB,Shim, DJ,Rudland, D (2014) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION A UNIFIED VISCOPLASTIC MODEL FOR HIGH TEMPERATURE LOW CYCLE FATIGUE OF SERVICE-AGED P91 STEEL [Details]
(2013) Durability of Fibre Reinforced Polymer Composite Materials
Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) Fatigue Life of Immersed Glass Reinforced Polymer Composites Durability of Fibre Reinforced Polymer Composite Materials National Composites Centre, Bristol, UK, [Details]
(2013) 17th International Conference on Composite Structures (ICCS-17), Porto, Portugal
D. M. Grogan, S. B. Leen, C. M. Ó Brádaigh (2013) Prediction of microcracking and delamination in composite laminates under cryogenic cycling using XFEM 17th International Conference on Composite Structures (ICCS-17), Porto, Portugal [Details]
(2013) Durability of Fibre Reinforced Polymer Composite Materials
Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) Fatigue Life of Immersed Glass Reinforced Polymer Composites Durability of Fibre Reinforced Polymer Composite Materials National Composites Centre, Bristol, UK, [Details]
(2013) SAMPE SETEC 2013 Conference, Wuppertal, Germany
Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M, (2013) Fatigue of Immersed Glass Reinforced Polymer Composite Tidal Turbine Blades SAMPE SETEC 2013 Conference, Wuppertal, Germany [Details]
(2013) Bioengineering in Ireland 19
Zhang, T, Harrison, NM, McDonnell, PF, McHugh, P.E., Leen, S.B. (2013) Tribological damage in the taper-lock coupling of a prosthetic hip implant Bioengineering in Ireland 19 [Details]
(2013) Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) A hierarchical dislocation-based model for high temperature fatigue Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin [Details]
(2013) Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin
O’Donoghue, PE, Barrett, RA, Leen, SB (2013) Finite element modelling of the thermo-mechanical behaviour of power plant steels Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin [Details]
(2013) Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin
Kennedy, CR, O’Bradaigh, C.M., Leen, S.B (2013) A multiaxial fatigue damage model for fibre-reinforced polymer composites Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, UCD, Dublin [Details]
(2013) INTERNATIONAL JOURNAL OF FATIGUE
Barrett, RA;O'Donoghue, PE;Leen, SB (2013) An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue INTERNATIONAL JOURNAL OF FATIGUE , pp.192-204 [DOI] [Details]
(2013) 9th International Conference on Composite Science and Technology (ICCST9), Sorrento, Italy
Kennedy, C, O’Bradaigh, C.M., Leen, S.B (2013) A multiaxial fatigue damage model for glass fibre reinforced polymer in seawater 9th International Conference on Composite Science and Technology (ICCST9), Sorrento, Italy [Details]
(2013) New Strategy for the prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083 Aluminium Alloy
Otegi, N,Galdos, L,Hurtado, I,Leen, SB,Bernhart, G (2013) SUPERPLASTICITY IN ADVANCED MATERIALS New Strategy for the prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083 Aluminium Alloy [DOI] [Details]
(2013) Bioengineering in Ireland 19
Sweeney, CA, B. O’Brien, McHugh, PE, Leen, SB (2013) Fatigue modelling of CoCr alloy stents Bioengineering in Ireland 19 [Details]
(2013) ASME PVP-2013, Paris, France
T.P. Farragher, S. Scully, N.P. O'Dowd, C.J. Hyde, S.B. Leen, (2013) High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material ASME PVP-2013, Paris, France [Details]
(2013) ASME PVP-2013, Paris, France
Barrett, RA, O’Donoghue, PE, Leen, SB (2013) A unified viscoplastic model for thermo-mechanical fatigue of service-aged P91 steel ASME PVP-2013, Paris, France [Details]
(2013) 9th International Conference on Composite Science and Technology, Sorrento, Italy
Kennedy, C.R., Leen, S.B. and Ó Brádaigh, C.M (2013) A Multiaxial Fatigue Damage Model for Glass Fibre Reinforced Polymers in Seawater 9th International Conference on Composite Science and Technology, Sorrento, Italy [Details]
(2012) IUTAM Symposium Advanced Materials Modelling for Structures
Barrett, RA, O’Donoghue, PE, Leen, SB (2012) Finite element modelling of the thermo‐mechanical behaviour of a 9Cr martensitic steel . In: Serge Kruch eds. IUTAM Symposium Advanced Materials Modelling for Structures [Details]
(2012) Irish Manufacturing Conference, IMC-29
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M. (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks Irish Manufacturing Conference, IMC-29 Belfast, Northern Ireland, [Details]
(2012) 12th International Conference on Materials in a Space Environment
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. and Ó Brádaigh, C.M, (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels in Cryogenic Fuel Storage Applications 12th International Conference on Materials in a Space Environment Noordwijk, The Netherlands, [Details]
(2012) 4th International Conference on Ocean Energy
Hartnett, M; Nash, S; Quinlan, N; Bruzzi, M; Goggins, J; O'Brádaigh, C; Leen, S (2012) Ocean energy numerical modelling and experimental testing facilities at the National University of Ireland, Galway 4th International Conference on Ocean Energy [Details]
(2012) Proceedings of the Irish Manufacturing Conference, IMC-29
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks Proceedings of the Irish Manufacturing Conference, IMC-29 [Details]
(2012) 12th International Conference on Materials in a Space Environment
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. and Ó Brádaigh, C.M (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels in Cryogenic Fuel Storage Applications . In: rotaional moulding eds. 12th International Conference on Materials in a Space Environment Noordwijk, The Netherlands, [Details]
(2012) 39th Leeds-Lyon Symposium on Tribology, Leeds
Zhang, T, Harrison, NM, McDonnell, PF, McHugh, P.E., Leen, S.B. (2012) Fretting wear-fatigue analysis for modular hip implant 39th Leeds-Lyon Symposium on Tribology, Leeds [Details]
(2012) 12th International Conference on Materials in a Space Environment
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. and Ó Brádaigh, C.M (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels in Cryogenic Fuel Storage Applications . In: rotaional moulding eds. 12th International Conference on Materials in a Space Environment Noordwijk, The Netherlands, [Details]
(2012) Irish Manufacturing Conference, IMC-29
Murray, B.R., Leen, S.B. and Ó Brádaigh, C.M. (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks Irish Manufacturing Conference, IMC-29 Belfast, Northern Ireland, [Details]
(2012) 8th European Solid Mechanics Conference (ESMC 2012), Graz, Austria
Sweeney, CA, McHugh, PE, Leen, SB. (2012) Micromechanical modelling of fatigue damage and crack nucleation in cardiovascular stents 8th European Solid Mechanics Conference (ESMC 2012), Graz, Austria [Details]
(2012) Bioengineering in Ireland 18
Sweeney, CA, McHugh, PE, Leen, SB (2012) Micromechanical modelling of fatigue crack nucleation in stents Bioengineering in Ireland 18 [ARAN Link] [Details]
(2012) Bioengineering in Ireland 18, Belfast
Zhang, T, Harrison, NM, McDonnell, PF, McHugh, P.E., Leen, S.B. (2012) Tribological behaviour of Ti6Al4V for the stem-head joint in prosthetic hip implants Bioengineering in Ireland 18, Belfast [Details]
(2012) Proc of 1st Int Conf of Int J of Structural Integrity, Porto, Portugal
Sun, W, Mohammed, MB, Xu, L, Hyde, TH, McCartney, DG, Leen, SB (2012) Evaluation of modelling capability of K-PAW fabrication of thin structures of titanium alloy Proc of 1st Int Conf of Int J of Structural Integrity, Porto, Portugal [Details]
(2012) Int Workshop on Mathematical and Mechanical Modelling for Materials, City University, Hong Kong
Rashid, B, Destrade, M, Gilchrist, MD, Leen, SB, Murphy, J (2012) Mechanics of sheared brain tissu Int Workshop on Mathematical and Mechanical Modelling for Materials, City University, Hong Kong , pp.28-31 [Details]
(2012) IMC 29, 29th Irish Manufacturing Conference, University of Ulster, Belfast
Murray, B, Leen, SB, O’Bradaigh, CM (2012) A study of air void formations in a modified rotational moulding process for COPV liners in hydrogen fuel tanks IMC 29, 29th Irish Manufacturing Conference, University of Ulster, Belfast , pp.29-30 [Details]
(2012) 12th International Symposium on Materials in the Space Environment (ISMSE-12)
Murray, B, Leen, SB, O’Bradaigh, CM (2012) Rotational Moulding of Polymer Liners for Composite Overwrapped Pressure Vessels for Cryogenic Fuel Storage Applications 12th International Symposium on Materials in the Space Environment (ISMSE-12) , pp.24-28 [Details]
(2012) 12th International Symposium on Materials in the Space Environment (ISMSE-12), ESA/ESTEC, Noordwijk, The Netherlands
D. M. Grogan, S. B. Leen, C. Semprimoschnig, C. M. Ó Brádaigh (2012) Modelling of thermal and mechanical fatigue delamination growth in composites using XFEM 12th International Symposium on Materials in the Space Environment (ISMSE-12), ESA/ESTEC, Noordwijk, The Netherlands [Details]
(2012) 4th Int Conf on Ocean Energy 2012 (ICOE 2012), Dublin
Kennedy, C, Leen, S.B., O’Bradaigh, C.M., (2012) Fatigue of glass fibre reinforced polymer composites tidal turbine blades 4th Int Conf on Ocean Energy 2012 (ICOE 2012), Dublin [Details]
(2012) New Strategy for the prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083Aluminium Alloy
Otegi, N., Galdos, L., Hurtado, I.,Leen, S.B (2012) 11th International Conference on Superplasticity in Advanced Materials, ICSAM 2012, Albi, France New Strategy for the prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083Aluminium Alloy [Details]
(2012) 9th International Conference on Creep and Fatigue at Elevated Temperatures, London, UK
Barrett, RA, O’Donoghue, PE, Leen, SB (2012) Multiaxial application of a hyperbolic sine unified viscoplasticity constitutive model to P91 steel 9th International Conference on Creep and Fatigue at Elevated Temperatures, London, UK [Details]
(2012) 9th International Conference on Creep and Fatigue at Elevated Temperatures, London, UK
T.P. Farragher, N.P. O'Dowd, S. Scully, C.J. Hyde, W. Sun, S.B. Leen (2012) High temperature low cycle fatigue behaviour of service-aged P91 material 9th International Conference on Creep and Fatigue at Elevated Temperatures, London, UK [Details]
(2012) ASME PVP-2012, Toronto, Ontario, Canada
Hyde, CJ, Sun, W, Hyde, TH, Rousse, JP, Farragher, T, O’Dowd, N.P., Leen, SB (2012) Cyclic viscoplasticity testing and modelling of a service-aged P91 steel ASME PVP-2012, Toronto, Ontario, Canada [Details]
(2012) Int Conf on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA
McCarthy, OJ, McGarry, JP, Leen, SB (2012) Micromechanical modelling of fretting fatigue crack nucleation in Ti-6Al-4V Int Conf on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA [Details]
(2011) Wear of Materials 2011
Zhang, T, McHugh, P.E., Leen, S.B. (2011) Computational study on the effect of contact geometry on fretting behaviour Wear of Materials 2011 [Details]
(2011) OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands
Kennedy, C, Leen, S.B., O’Bradaigh, C.M. (2011) A study on the effect of seawater on the fatigue life of polymer composites for tidal turbines OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands [Details]
(2011) IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick
McCarthy, OJ, McGarry, JP, Leen, SB (2011) Microstructure sensitive prediction of fretting wear and crack nucleation IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick [Details]
(2011) IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick
Farragher, TP, O’Dowd, NP, Scully, S, Leen, SB, (2011) Thermomechanical characteristion of P91 power plant components IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick [Details]
(2011) IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick
Sweeney, C, McHugh, PE, Leen (2011) Microstructural modelling of fatigue crack nucleation in stents IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick [Details]
(2011) ESAFORM 2011, Belfast
Otegi, N,. Glados, L., Hurtado, I., Leen, S.B. (2011) Analysis of the capabilities of a hyperbolic constitutive equation for Al-5083 superplastic aluminium alloy ESAFORM 2011, Belfast [Details]
(2011) 30th Int Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands
Josse, T., Billet, A, Leen, S.B., (2011) Prediction of supply vessel motion during transfer to an offshore wind turbine structure 30th Int Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands [Details]
(2011) Analysis of the Capabilities of a Hyperbolic Constitutive Equation for Al-5083 Superplastic Aluminium Alloy
Otegi, N,Galdos, L,Hurtado, I,Leen, SB,Menary, G (2011) 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS Analysis of the Capabilities of a Hyperbolic Constitutive Equation for Al-5083 Superplastic Aluminium Alloy , pp.1574-1579 [DOI] [Details]
(2011) WEAR
Tobi, ALM;Shipway, PH;Leen, SB (2011) Gross slip fretting wear performance of a layered thin W-DLC coating: Damage mechanisms and life modelling WEAR , pp.1572-1584 [DOI] [Details]
(2011) OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering
Josse, T., Billet, A, Leen, S.B., (2011) Prediction of supply vessel motion during transfer to an offshore wind turbine structure OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering Rotterdam, The Netherlands, , 19-JUN-11 - 24-JUN-11 [Details]
(2011) OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering
Kennedy, C, Leen, S.B., O'Bradaigh, C.M. (2011) A study on the effect of seawater on the fatigue life of polymer composites for tidal turbines OMAE 2011, 30th Int Conference on Ocean, Offshore and Arctic Engineering Rotterdam, The Netherlands, , 19-JUN-11 - 24-JUN-11 [Details]
(2011) ESAFORM
Otegi, N,. Glados, L., Hurtado, I., Leen, S.B., (2011) Analysis of the capabilities of a hyperbolic constitutive equation for Al-5083 superplastic aluminium alloy ESAFORM Belfast, [Details]
(2011) ASME PVP-2011
Farragher, TP, O'Dowd, NP, Scully, S, Leen, SB (2011) Thermomechanical analysis of a pressurised plain pipe under realistic plant conditions ASME PVP-2011 Baltimore, Maryland, USA, , 17-JUL-11 - 21-JUL-11 [Details]
(2011) ASME PVP-2011, Baltimore, Maryland, USA
Farragher, TP, O’Dowd, NP, Scully, S, Leen, SB (2011) Thermomechanical analysis of a pressurised plain pipe under realistic plant conditions ASME PVP-2011, Baltimore, Maryland, USA [Details]
(2011) Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering
Kennedy, C.R., Leen, S.B., Ó Brádaigh, C.M. (2011) A Study on the Fatigue Life of Glass Reinforced Polymer Composites for Tidal Turbine Blades Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering Rotterdam, The Netherlands, [Details]
(2010) ESAFORM 2010, Brescia, Italy
1) Bennett, CJ, Leen, SB, Shipway, PH. (2010) A finite element analysis of errors in axisymmetric isothermal and Gleeble compression testing of Ti-6Al-4V ESAFORM 2010, Brescia, Italy [Details]
(2010) BioEngineering in Ireland
1) Grogan, J, O’Brien, B, Leen, S.B., McHugh, P.E. (2010) Computational and experimental analysis of the physical performance of biodegradable metallic stents BioEngineering in Ireland [Details]
(2010) A PHENOMIENOLOGICAL MODEL OF CORROSION IN BIODEGRADABLE METALLIC STENTS
Grogan, J,Leen, S,McHugh, P, (2010) PROCEEDINGS OF THE ASME SUMMER BIOENGINEERING CONFERENCE, 2010 A PHENOMIENOLOGICAL MODEL OF CORROSION IN BIODEGRADABLE METALLIC STENTS , pp.117-118 [Details]
(2010) Finite element modelling and experimental testing of thermomechanical behaviour and failure of titanium superplastic forming dies
Leen, SB,Deshpande, AA,Hyde, TH,Sanders, DG (2010) SUPERPLASTICITY IN ADVANCED MATERIALS Finite element modelling and experimental testing of thermomechanical behaviour and failure of titanium superplastic forming dies , pp.247-256 [DOI] [Details]
(2010) PROCEEDINGS OF THE ASME SUMMER BIOENGINEERING CONFERENCE, 2010
Grogan, J;Leen, S;McHugh, P (2010) A PHENOMIENOLOGICAL MODEL OF CORROSION IN BIODEGRADABLE METALLIC STENTS PROCEEDINGS OF THE ASME SUMMER BIOENGINEERING CONFERENCE, 2010 , pp.117-118 [Details]
(2010) INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
Hyde, CJ;Sun, W;Leen, SB (2010) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , pp.365-372 [DOI] [Details]
(2010) TRIBOLOGY INTERNATIONAL
Tobi, ALM;Ding, J;Pearson, S;Leen, SB;Shipway, PH (2010) The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems TRIBOLOGY INTERNATIONAL , pp.1917-1932 [DOI] [Details]
(2010) ESAFORM
Bennett, CJ, Leen, SB, Shipway, PH, (2010) A finite element analysis of errors in axisymmetric isothermal and Gleeble compression testing of Ti-6Al-4V ESAFORM Brescia, Italy, , 07-APR-10 - 09-APR-10 [Details]
(2010) SUPERPLASTICITY IN ADVANCED MATERIALS
LEEN, SB et al. (2010) Finite element modelling and experimental testing of thermomechanical behaviour and failure of titanium superplastic forming dies SUPERPLASTICITY IN ADVANCED MATERIALS , pp.247-256 [Details]
(2010) EuroSPF
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2010) Comparison study of two constitutive equations for Al-5083 aluminium alloy EuroSPF Donostia-San Sebastián, Euskadi, Spain, , 08-SEP-10 - 10-SEP-10 [Details]
(2010) ESAFORM 2010
A A Deshpande, S B Leen, W Sun, T H Hyde, (2010) Thermo-mechanical analysis and lifing of Ni-Cr SPF tool ESAFORM 2010 Brescia, Italy, , 07-APR-10 - 09-APR-10 [Details]
(2010) EuroSPF 2010, Donostia-San Sebastián, Euskadi, Spain
Otegi, N, Galdos, L, Hurtado, I, Leen, SB (2010) Comparison study of two constitutive equations for Al-5083 aluminium alloy EuroSPF 2010, Donostia-San Sebastián, Euskadi, Spain [Details]
(2009) WEAR
Tobi, ALM;Ding, J;Bandak, G;Leen, SB;Shipway, PH (2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V WEAR , pp.270-282 [DOI] [Details]
(2009) Finite element modelling of damage in superplastic forming of a titanium alloy
Leen, S. B. & Stoyanov, M. (2009) Finite element modelling of damage in superplastic forming of a titanium alloy Finite element modelling of damage in superplastic forming of a titanium alloy , 27-APR-09 - 29-APR-09 [Details]
(2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V
Mohd Tobi, A. L., Ding, J., Bandak, G., Leen, S. B. & Shipway, P. H. (2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V , 19-APR-09 - 22-APR-09 [Details]
(2009) Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation
Everitt, N., Ding, J., Bandak, G., Leen, S. B., Williams, J. & Shipway, P. H. (2009) Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation Characterisation of mechanical properties of fretting-induced debris structure via nano-indentation , 19-APR-09 - 22-APR-09 [Details]
(2009) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel
Hyde, C. J., Sun, W., Leen, S. B. (2009) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel Cyclic thermo-mechanical material modelling and testing of 316 stainless steel , 21-APR-09 - 23-APR-09 [Details]
(2009) ICSAM
Leen, S.B., Deshpande, A., Hyde, T.H., (2009) Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies ICSAM Seattle, Washington, US, , 29-JUN-09 - 02-JUL-09 [Details]
(2009) Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy
Deshpande, A., Leen, S. B. & Hyde, T. H. (2009) Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy Experimental and numerical characterisation of the cyclic thermo-mechanical behaviour of a high temperature forming tool alloy , 26-JUL-09 - 30-JUL-09 [Details]
(2009) A holistic approach on structural integrity of high temperature welds in power plants
Hyde, T. H., Sun, W., Becker, A. A., Leen, S. B., Shipway, P. H., Thomson, R. C., Yaghi, A. H., Sanchez-Hanton, J. (2009) A holistic approach on structural integrity of high temperature welds in power plants A holistic approach on structural integrity of high temperature welds in power plants , 06-APR-09 - 07-APR-09 [Details]
(2009) Leeds-Lyon Symposium on Tribology
A. L. Mohd Tobi, J. Ding, S Pearson, S. B. Leen, P. H. Shipway, (2009) The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems Leeds-Lyon Symposium on Tribology Lyon, [Details]
(2009) TRIBOLOGY INTERNATIONAL
Ding, J;Bandak, G;Leen, SB;Williams, EJ;Shipway, PH (2009) Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V TRIBOLOGY INTERNATIONAL , pp.1651-1662 [DOI] [Details]
(2009) A multi-scale model for fretting wear with oxidation-debris effects
Ding, J,Leen, SB,Williams, EJ,Shipway, PH (2009) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY A multi-scale model for fretting wear with oxidation-debris effects , pp.1019-1031 [DOI] [Details]
(2009) Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V
Ding, J,Bandak, G,Leen, SB,Williams, EJ,Shipway, PH (2009) TRIBOLOGY INTERNATIONAL Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V , pp.1651-1662 [DOI] [Details]
(2009) A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V
Tobi, ALM,Ding, J,Bandak, G,Leen, SB,Shipway, PH (2009) WEAR A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V , pp.270-282 [DOI] [Details]
(2009) Characterisation of fretting-induced wear debris for Ti-6Al-4 V
Everitt, NM,Ding, J,Bandak, G,Shipway, PH,Leen, SB,Williams, EJ (2009) WEAR Characterisation of fretting-induced wear debris for Ti-6Al-4 V , pp.283-291 [DOI] [Details]
(2009) Leeds-Lyon Symposium on Tribology, Lyon
A. L. Mohd Tobi, J. Ding, S Pearson, S. B. Leen, P. H. Shipway (2009) The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems Leeds-Lyon Symposium on Tribology, Lyon [Details]
(2009) ICSAM 2009, Seattle, Washington, US
Leen, S.B., Deshpande, A., Hyde, T.H. (2009) Finite element modelling and experimental testing for prediction of thermo-mechanical behaviour and failure of titanium superplastic forming dies ICSAM 2009, Seattle, Washington, US [Details]
(2009) Cyclic Thermo-mechanical Material Modelling and Testing of 316 Stainless Steel
Hyde, CJ,Sun, W,Leen, SB,Shibli, IA,Holdsworth Sr (2009) CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS Cyclic Thermo-mechanical Material Modelling and Testing of 316 Stainless Steel [Details]
(2009) A Holistic Approach to Structural Integrity of High Temperature Welds in Power Plants
Hyde, TH,Sun, W,Becker, AA,Leen, SB,Shipway, PH,Zhang, Y,Thomson, RC,Yaghi, AH,Sanchez-Hanton, J, (2009) 2009 INTERNATIONAL CONFERENCE ON SUSTAINABLE POWER GENERATION AND SUPPLY, VOLS 1-4 A Holistic Approach to Structural Integrity of High Temperature Welds in Power Plants [Details]
(2009) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
Ding, J;Leen, SB;Williams, EJ;Shipway, PH (2009) A multi-scale model for fretting wear with oxidation-debris effects PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , pp.1019-1031 [DOI] [Details]
(2009) 2009 INTERNATIONAL CONFERENCE ON SUSTAINABLE POWER GENERATION AND SUPPLY, VOLS 1-4
Hyde, TH;Sun, W;Becker, AA;Leen, SB;Shipway, PH;Zhang, Y;Thomson, RC;Yaghi, AH;Sanchez-Hanton, J (2009) A Holistic Approach to Structural Integrity of High Temperature Welds in Power Plants 2009 INTERNATIONAL CONFERENCE ON SUSTAINABLE POWER GENERATION AND SUPPLY, VOLS 1-4 [Details]
(2009) CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS
Hyde, CJ;Sun, W;Leen, SB (2009) Cyclic Thermo-mechanical Material Modelling and Testing of 316 Stainless Steel CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS [Details]
(2009) WEAR
Everitt, NM;Ding, J;Bandak, G;Shipway, PH;Leen, SB;Williams, EJ (2009) Characterisation of fretting-induced wear debris for Ti-6Al-4 V WEAR , pp.283-291 [DOI] [Details]
(2008) 2008 ASME PVP Conference, Chicago
Leen, SB, Hyde, Peravali, S, Sun, W. (2008) A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method 2008 ASME PVP Conference, Chicago [Details]
(2008) An asperity-contact based oxidation model for fretting wear with the presence of debris
1) Ding, J, Leen, SB, Williams, EJ, Shipway, PH. (2008) 5th China International Symp on Tribology and 1st Int Tribology Symp of IFToMM, Bejing, China An asperity-contact based oxidation model for fretting wear with the presence of debris [Details]
(2008) Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V
Ding, J., Bandak, G., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V Experimental characterisation and numerical simulation of contact evolution during fretting for TI-6Al-4V , 09-SEP-08 - 12-SEP-08 [Details]
(2008) Multiaxial fretting fatigue testing and prediction for splined couplings
Houghton, D., Wavish, P. M., Williams, E. J. & Leen, S. B. (2008) Multiaxial fretting fatigue testing and prediction for splined couplings Multiaxial fretting fatigue testing and prediction for splined couplings , 14-SEP-08 [Details]
(2008) An asperity-contact based oxidation model for fretting wear with the presence of debris
Ding, J., Leen, S. B., Williams, E. J. & Shipway, P. H. (2008) An asperity-contact based oxidation model for fretting wear with the presence of debris An asperity-contact based oxidation model for fretting wear with the presence of debris , 24-SEP-08 - 27-SEP-08 [Details]
(2008) Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions
Deshpande, A. A., Leen, S. B. & Hyde, T. H. (2008) Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions Progressive distortion behaviour of large SPF tool under thermo-mechanical fatigue and fatigue-creep interactions , 23-JUN-08 - 26-JUN-08 [Details]
(2008) High-temperature experimental characterisation of XN40F for life prediction of SPF tools
Deshpande, A. A., Leen, S. B. & Hyde, T. H. (2008) High-temperature experimental characterisation of XN40F for life prediction of SPF tools High-temperature experimental characterisation of XN40F for life prediction of SPF tools , 03-SEP-08 - 05-SEP-08 [Details]
(2008) Int Conf on Fatigue Damage of Structural Materials VII, Hyannis, USA
1) Houghton, D, Wavish, P.M., Williams, EJ, Leen, SB (2008) Multiaxial fretting fatigue testing and prediction for splined couplings Int Conf on Fatigue Damage of Structural Materials VII, Hyannis, USA [Details]
(2008) A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method
Leen, S. B., Hyde, T. H., Peravali, S. & Sun, W. (2008) A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method A comparative study of a single damage parameter life prediction method and a physically-based damage mechanics method , 27-JUL-08 - 31-JUL-08 [Details]
(2008) A comparison of failure prediction methods for superplastic deformation
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2008) A comparison of failure prediction methods for superplastic deformation A comparison of failure prediction methods for superplastic deformation , 25-APR-08 - 28-APR-08 [Details]
(2007) Failure prediction for titanium alloys using a superplastic forming limit diagram
Leen, S. B., Krohn, M. A. & Hyde, T. H. (2007) Failure prediction for titanium alloys using a superplastic forming limit diagram Failure prediction for titanium alloys using a superplastic forming limit diagram , 05-SEP-07 - 07-SEP-07 [Details]
(2007) An anisotropic creep damage model for anisotropic weld metal
Peravali, S., Hyde, T. H., Cliffe, K. A. & Leen, S. B. (2007) An anisotropic creep damage model for anisotropic weld metal An anisotropic creep damage model for anisotropic weld metal , 22-JUL-07 - 26-JUL-07 [Details]
(2007) Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings
Houghton, D., Wavish, P. M., Leen, S. B. & Williams, E. J. (2007) Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings Improved correlation of measured and predicted hysteresis loops in a multiaxial fretting fatigue test rig for splined couplings , 04-SEP-07 - 06-SEP-07 , pp.37-42 [Details]
(2007) Finite element based predictions for life-limiting behaviour for large SPF tools
Deshpande, A., Leen, S. B. & Hyde, T. H. (2007) Finite element based predictions for life-limiting behaviour for large SPF tools Finite element based predictions for life-limiting behaviour for large SPF tools , 05-SEP-07 - 07-SEP-07 [Details]
(2007) An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding
Sabesan, R., Leen, S. B. & Hyde, T. H. (2007) An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding An interpolation method to predict elastic-plastic notch stresses and strains for a power hardening material under large scale yielding , 26-MAR-07 - 28-MAR-07 [Details]
(2007) The critical role of fretting wear in the analysis of fretting fatigue
Madge, J.J., Leen, S. B. & Shipway, P. H. (2007) The critical role of fretting wear in the analysis of fretting fatigue The critical role of fretting wear in the analysis of fretting fatigue [Details]
(2007) Fatigue crack growth in aeroengine shafts using the finite element method
Sabesan, R., Leen, S. B. & Williams, E. J. (2007) Fatigue crack growth in aeroengine shafts using the finite element method Fatigue crack growth in aeroengine shafts using the finite element method , 26-MAR-07 - 28-MAR-07 [Details]
(2007) A finite element based approach to simulating the effects of debris on fretting wear
Ding, J., McColl, I. R. & Leen, S. B. (2007) A finite element based approach to simulating the effects of debris on fretting wear A finite element based approach to simulating the effects of debris on fretting wear [Details]
(2007) Development of an anisotropic damage model for creep of welds
Peravali, S., Hyde, T. H., Cliffe, K. A. & Leen, S. B. (2007) Development of an anisotropic damage model for creep of welds Development of an anisotropic damage model for creep of welds , 24-APR-07 - 26-APR-07 , pp.267-283 [Details]
(2006) Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods
Rajaratnam, S., Hyde, T. H. & Leen, S. B. (2006) Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods Characterisation of a simplified aeroengine casing subjected to a radial loading condition using FE and approximate methods [Details]
(2006) Towards the modelling of fretting wear and fatigue interaction in spline couplings
Ding, K., Madge, J. J., Leen, S. B. & Williams, E. J. (2006) Towards the modelling of fretting wear and fatigue interaction in spline couplings Towards the modelling of fretting wear and fatigue interaction in spline couplings , 05-SEP-06 - 07-SEP-06 , pp.165-172 [Details]
(2006) Strain-based failure prediction for superplastic forming
Leen, S. B., Krohn, M. & Hyde, T. H. (2006) Strain-based failure prediction for superplastic forming Strain-based failure prediction for superplastic forming , 26-APR-06 - 28-APR-06 , pp.351-354 [Details]
(2006) High temperature life prediction of superplastic forming dies
Leen, S. B., Shang, J. & Hyde, T. H. (2006) High temperature life prediction of superplastic forming dies High temperature life prediction of superplastic forming dies , 05-DEC-06 - 06-DEC-06 , pp.53-54 [Details]
(2006) Experimental testing and FE modelling of the forming of two titanium SPF alloys
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2006) Experimental testing and FE modelling of the forming of two titanium SPF alloys Experimental testing and FE modelling of the forming of two titanium SPF alloys , 13-SEP-06 - 14-SEP-06 [Details]
(2006) A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens
Madge, J. J., McColl, I. R., Leen & S. B. (2006) A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens A computational study on the wear induced-evolution of fatigue damage parameters in fretting fatigue specimens , 14-MAY-06 - 19-MAY-06 [Details]
(2006) Modern Practice in Stress and Vibration Analysis VI, Bath, Sept 2006, Ed P.S. Keogh
1) Ding, K, Madge, JJ, Leen, SB, Williams, EJ (2006) Towards the modelling fretting wear and fatigue interaction in spline couplings Modern Practice in Stress and Vibration Analysis VI, Bath, Sept 2006, Ed P.S. Keogh [Details]
(2005) Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings
Bansal, P., Shipway, P. H. & Leen, S. B. (2005) Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings Finite element modelling of acoustic emission behaviour of thermally-sprayed WC-Co coatings , 02-MAY-05 - 04-MAY-05 [Details]
(2005) The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die
Shang, J., Leen, S. B. & Hyde, T. H. (2005) The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die The time-dependent, elastic-plastic, cyclic behaviour of a representative SPF die , pp.129-134 [Details]
(2005) Some microstructural observations of a superplastic titanium alloy
Krohn, M. A., Pan, W., Leen, S. B., Hyde, T. H. & Walloe, S. (2005) Some microstructural observations of a superplastic titanium alloy Some microstructural observations of a superplastic titanium alloy , pp.47-52 [Details]
(2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units
Leen, S. B., Hyde, T. H., Rajaratnam, S. and Pan, W. (2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units , 05-JUL-05 - 07-JUL-05 , pp.261-268 [Details]
(2005) Design of a multi-axial test specimen for fretting fatigue in splined couplings
Wavish, P., McColl, I. R. & Leen, S. B. (2005) Design of a multi-axial test specimen for fretting fatigue in splined couplings Design of a multi-axial test specimen for fretting fatigue in splined couplings , 06-SEP-05 - 08-SEP-05 , pp.267-272 [Details]
(2004) An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel
Soh, H. P., Ding, K., Leen, S. B. & McColl, I. R. (2004) An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel An experimental and numerical study on the effects of nitriding on the fretting wear behaviour of a CrMoV steel , 29-AUG-04 - 02-SEP-04 [Details]
(2004) FE modelling of transient heat transfer in SPF dies
Shang, J., Leen, S. B., Pashby, I. R., Hyde, T. H. & Kennedy, A. R. (2004) FE modelling of transient heat transfer in SPF dies FE modelling of transient heat transfer in SPF dies , 07-JUL-04 - 09-JUL-04 , pp.125-131 [Details]
(2004) Application of a general formulation approach for steady-state creep lifing of welded branched pipes
Leen, S. B., Hyde, T. H. and Rayner, G. (2004) Application of a general formulation approach for steady-state creep lifing of welded branched pipes Application of a general formulation approach for steady-state creep lifing of welded branched pipes , 14-APR-04 - 16-APR-04 [Details]
(2004) Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation
Pan, W., Krohn, M., Leen, S. B., Hyde, T. H. and Walloe, S. (2004) Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation Superplastic forming of Ti-6Al-2Sn-4Zr-2Mo: experiments and simulation , pp.1101-1106 [Details]
(2003) Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour
Pan, W., Leen, S. B. & Hyde, T. H. (2003) Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour Investigations on simplified modelling of framework collapse analyses with non-linear joint behaviour , 18-SEP-03 - 20-SEP-03 , pp.491-499 [Details]
(2003) Parametric analysis of stresses in a welded branched pipe under creep conditions
Rayner, G., Hyde, T. H. and Leen, S. B. (2003) Parametric analysis of stresses in a welded branched pipe under creep conditions Parametric analysis of stresses in a welded branched pipe under creep conditions , pp.359-369 [Details]
(2003) FE analysis of the creep of branched pipes
Hyde, T. H., Sun, W., Leen, S. B. & Rayner, G. (2003) FE analysis of the creep of branched pipes FE analysis of the creep of branched pipes , pp.41-66 [Details]
(2003) Simplified method to predict elastic-plastic behaviour of aeroengine casings
Sabesan, R., Leen, S. B. & Hyde, T. H. (2003) Simplified method to predict elastic-plastic behaviour of aeroengine casings Simplified method to predict elastic-plastic behaviour of aeroengine casings , pp.373-380 [Details]
(2003) Effect of coefficient of friction on the fatigue life of splines
Ratsimba, C. H. H., Leen, S. B., McColl, I. R. & Williams, E. J. (2003) Effect of coefficient of friction on the fatigue life of splines Effect of coefficient of friction on the fatigue life of splines , pp.35-44 [Details]
(2002) Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens
Kim, J. H., Leen, S. B. & Wykes, C. (2002) Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens Out-of-plane ESPI measurement and FEM analysis using RP and conventional material specimens , pp.9-12 [Details]
(2002) 6th Int. Conf. on Eng. Structural Integrity Assessment, UMIST, Manchester, UK
1) Hyde, T.H., Rayner, G., Leen, S.B. and Sun, W. (2002) Study on creep behaviour of typical welded branched pipes 6th Int. Conf. on Eng. Structural Integrity Assessment, UMIST, Manchester, UK , pp.147-154 [Details]
(2002) Proc. of Twelfth (2002) Int. Offshore and Polar Engineering Conference, Japan
1) Pan, W., Leen, S.B., Hyde, T.H. (2002) Static analysis of frame by localised representation of tubular joint Proc. of Twelfth (2002) Int. Offshore and Polar Engineering Conference, Japan , pp.21-25 [Details]
(2002) Fatigue of a representative aeroengine splined coupling
Leen, S. B., Ratsimba, C. H. H., Williams, E. J. & McColl, I. R. (2002) Fatigue of a representative aeroengine splined coupling Fatigue of a representative aeroengine splined coupling , pp.1079-1086 [Details]
(2001) Finite element study on the static strength of a cracked tubular T-joint
Saad, S.B., Leen, S. B. and Hyde, T. H. (2001) Finite element study on the static strength of a cracked tubular T-joint Finite element study on the static strength of a cracked tubular T-joint , 03-APR-01 - 05-APR-01 , pp.247-255 [Details]
(2001) Aerospace Transmissions Technology into the 21st Century, IMechE European Seminar, Marseilles, France
S.B.Leen, I.J. Richardson, C.H.H. Ratsimba, I.R. McColl, E.J. Williams (2001) Fatigue of a representative aeroengine splined coupling under torque overload Aerospace Transmissions Technology into the 21st Century, IMechE European Seminar, Marseilles, France [Details]
(2000) A representative model for life assessment of spline couplings
Hyde, T. R., Leen, S. B., McColl, I. R., Williams, E. J. & Taylor, J. W. (2000) A representative model for life assessment of spline couplings A representative model for life assessment of spline couplings , pp.625-635 [Details]
(2000) The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints
Leen, S. B. and Hyde, T. H. (2000) The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints The effect of chord support conditions on the force-displacement characteristics of tubular YT-joints , 28-MAY-00 - 02-JUN-00 , pp.45-52 [Details]
(1999) Experimental and finite element investigations on the static strength of a plane tubular framework structure
Hyde, T. H., Ou, H. and Leen, S. B. (1999) Experimental and finite element investigations on the static strength of a plane tubular framework structure Experimental and finite element investigations on the static strength of a plane tubular framework structure , pp.63-70 [Details]
(1998) Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld
Leen, S. B. and Hyde, T. H. (1998) Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld Load-displacement characterisation and prediction for combined loading of a YT tubular joint with and without fillet weld , 26-AUG-98 - 28-AUG-98 , pp.285-292 [Details]
(1998) Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes
Leen, S. B. and Hyde, T. H. (1998) Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes Prediction of elastic-plastic generalised force-displacement responses of tubular joints for three different loading modes , 30-NOV-98 - 04-DEC-98 , pp.24-31 [Details]
(1998) A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints
Hyde, T. H., Saad, S. B., Khalid, Y., Leen, S. B. and Warrior, N. A. (1998) A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints A critical assessment of the finite element method for predicting the static strength of tubular T- and YT-joints , 26-AUG-98 - 28-AUG-98 , pp.293-302 [Details]
(1998) Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction
Leen, S. B. and Hyde, T. H. (1998) Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction Elastic-plastic moment-rotation characterisation of tubular YT-joint using an energy method for response prediction , 24-APR-98 - 29-MAY-98 , pp.56-63 [Details]

Conference Contributions

  Year Publication
(2011) IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials,
Grogan, J, O’Brien, B, Leen, S.B., McHugh, P.E. (2011) A phenomenological corrosion model for biodegradable metals with application in bioabsorbable stent assessment and design. [Oral Presentation], IWCMM 21, 21st Int Workshop on Computational Mechanics of Materials, University of Limerick , 21-AUG-11 - 24-AUG-11. [Details]

Correction

  Year Publication
(2010) Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy (vol 132, 051013, 2010).
Deshpande, AA,Leen, SB,Hyde, TH (2010) Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy (vol 132, 051013, 2010). Correction [Details]

Editorial

  Year Publication
(2019) Multi-scale fatigue, fracture and damage of materials in harsh environments at NUI Galway, Ireland.
Leen, SB,O'Donoghue, PE (2019) Multi-scale fatigue, fracture and damage of materials in harsh environments at NUI Galway, Ireland. Editorial [DOI] [Details]

Reviews

  Year Publication
(2020) A review of thermal, microstructural and constitutive modelling of 9Cr steel for power plant applications: Towards a through-process model for structural integrity of welded connections.
Mac Ardghail, P;Leen, SB;Harrison, NM (2020) A review of thermal, microstructural and constitutive modelling of 9Cr steel for power plant applications: Towards a through-process model for structural integrity of welded connections. OXFORD: Reviews [DOI] [Details]
(2019) A review of the integrity of metallic vehicle armour to projectile attack.
Lenihan, D;Ronan, W;O'Donoghue, PE;Leen, SB (2019) A review of the integrity of metallic vehicle armour to projectile attack. LONDON: Reviews [DOI] [Details]

Workshops

  Year Publication
(2008) Contact evolution based fretting fatigue prediction, Part One: Experimental and Numerical Modelling Aspects.
Leen, S. B. (2008) Contact evolution based fretting fatigue prediction, Part One: Experimental and Numerical Modelling Aspects. Workshops [Details]
(2006) Finite element simulation of superplastic forming.
Krohn, M. A., Leen, S. B. & Hyde, T. H. (2006) Finite element simulation of superplastic forming. Workshops [Details]
(2005) Life prediction in aeroengine splines.
Williams, E. J., McColl, I. R., Leen, S. B., Sum, W. S., Ding, J. & Ratsimba, C. H. H. (2005) Life prediction in aeroengine splines. Workshops [Details]
(2005) Overview of material behaviour modelling for FE simulation in superplastic forming.
Leen, S. B. (2005) Overview of material behaviour modelling for FE simulation in superplastic forming. Workshops [Details]
(2003) Fretting and fatigue in splined couplings.
Leen, S. B. Hyde, T. R. & McColl, I. R. (2003) Fretting and fatigue in splined couplings. Workshops [Details]
(2001) Fatigue of a representative aeroengine splined coupling under torque overload.
Leen, S. B., Richardson, I. J., Ratsimba, C. H. H., McColl, I. R. & Williams, E. J. (2001) Fatigue of a representative aeroengine splined coupling under torque overload. Workshops [Details]