Course Overview

Science 2020 badge

This MSc programme is designed to meet the demand for qualified medical physicists. It is primarily geared toward training for physicists in the application of radiation physics in medicine but maintains a reasonable exposure to key aspects of clinical engineering so that students receive a comprehensive knowledge of the application of the physical sciences and engineering to medicine.

The course is unique in that it is closely integrated with the University Hospital Galway.
The majority of lectures and course materials are delivered by hospital staff.
The course provides a unique opportunity to see the operation of a busy academic hospital.

September 2015: University of Galway’s MSc in Medical Physics is the first European MSc programme to be awarded accreditation from the Commission on Accreditation of Medical Physics Education Programmes (CAMPEP) and the second programme worldwide. Read more here.

Scholarships available
Find out about our Postgraduate Scholarships here.

L–R: Dr Christoph Kleefeld (Clinical director MSc in Medical Physics), Ryan Muddiman, Morgan Healy, Kevin Byrne, Sthuthi Medepalli, Michael Moran, David Connolly & Dr Mark Foley (Academic director MSc in Medical Physics).

2019 Medical Physics postgraduate scholars

Med Physics scholars

L–R: Dr Christoph Kleefeld (Clinical Director, MSc in Medical Physics), Ryan Muddiman, Morgan Healy, Kevin Byrne, Sthuthi Medepalli, Michael Moran, David Connolly & Dr Mark Foley (Academic Director,  MSc in Medical Physics).

  • 2019 Walton scholarship award—Kevin Byrne
  • 2019 van der Putten scholarship award—David Connolly
  • 2019 George Johnstone Stoney scholarship award—Michael Moran
  • 2019 Postgraduate International Merit scholarship award—Sthuthi Medepalli
  • 2019 Postgraduate scholarship—Morgan Healy & Ryan Muddiman

Absent from the picture were international student scholarship holders Anwar Beleehan & Rawan Tawatti.

Applications and Selections

Applications are made online via the University of Galway Postgraduate Applications System. Selection is based on the candidate's academic record at under-graduate level and their aptitude for the course. Candidates may be interviewed to determine suitability.

Who Teaches this Course

Requirements and Assessment

Assssments take the form of assignments, essays, presentations and conventional exams. There is an increasing emphasis on self-directed learning. A small research project counts for about 30% of the overall marks.

Key Facts

Entry Requirements

Graduates must hold at least a Second Class Honours, Level 8 degree (or equivalent international qualification) in physics or experimental physics, electronic engineering, or another relevant discipline as determined by the College of Science. Candidates with a primary degree without honours and with three years’ relevant and appropriate practical experience may be also considered.

Additional Requirements

Garda vetting/police clearance is required for this programme.

Recognition of Prior Learning (RPL)

Candidates with a primary degree without honours and with three years’ relevant and appropriate practical experience may be also considered.

Duration

1 year, full-time

Next start date

September 2024

A Level Grades ()

Average intake

Up to 20

QQI/FET FETAC Entry Routes

Closing Date

No set closing date. Offers made on a continuous basis.

NFQ level

Mode of study

ECTS weighting

90

Award

CAO

Course code

MSC-PY

Course Outline

The MSc consists of a fairly intense programme of lectures, workshops, laboratory sessions, tutorials and self-directed learning, followed by a four to five-month research project. The syllabus contains modules covering traditional Medical Physics topics, such as Radiation Fundamentals, and Hospital and Radiation Safety, but also provides an introduction to other areas like Clinical Instrumentation, Modules in Anatomy, Physiology, Medical Informatics and Safety and Risk Management. 

Save

Curriculum Information

Curriculum information relates to the current academic year (in most cases).
Course and module offerings and details may be subject to change.

Glossary of Terms

Credits
You must earn a defined number of credits (aka ECTS) to complete each year of your course. You do this by taking all of its required modules as well as the correct number of optional modules to obtain that year's total number of credits.
Module
An examinable portion of a subject or course, for which you attend lectures and/or tutorials and carry out assignments. E.g. Algebra and Calculus could be modules within the subject Mathematics. Each module has a unique module code eg. MA140.
Optional
A module you may choose to study.
Required
A module that you must study if you choose this course (or subject).
Semester
Most courses have 2 semesters (aka terms) per year.

Year 1 (90 Credits)

Required SI2103: Fundamentals of Physiology


Semester 1 | Credits: 5

Fundamental Physiology (SI210) is a blended learning 5 ECTS module that has been specifically created to provide students of Health & Safety Systems with some fundamental knowledge of human body function that is relevant to their course of study.
(Language of instruction: English)

Learning Outcomes
  1. Appreciate the role of Physiology in a range of professional careers.
  2. Appreciate the concept of homeostatic mechanisms within the body or ‘body balance’.
  3. Understand the importance of water in the body, and the relevance of body fluid compartments.
  4. Demonstrate knowledge of how foreign substances or pathogens can gain access to the body to cause toxicity or disease, both at a systemic and at a cellular level.
  5. Demonstrate knowledge of the physiology of the common routes of toxin entry, including the respiratory and gastrointestinal systems.
  6. Demonstrate a basic knowledge of the physiology of the nervous system and some well-known examples of neurotoxins.
  7. Demonstrate a basic knowledge of how muscles work, and some musculoskeletal disorders that are common in the workplace.
  8. Demonstrate a basic knowledge of the functions and composition of the blood and some common vascular disorders.
  9. Understand the fundamentals of how the heart works, and the electrocardiogram (ECG).
  10. Demonstrate a basic knowledge of some mechanisms that the body uses to defend itself against disease and injury, including inflammation.
  11. Demonstrate a basic knowledge of the physiological changes that occur in pregnancy, the development of a baby during pregnancy and the risks associated with teratogens.
Assessments
  • Continuous Assessment (40%)
  • Computer-based Assessment (60%)
Teachers
The above information outlines module SI2103: "Fundamentals of Physiology" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5122: AI Applications in Medical Physics


Semester 1 | Credits: 5

This is a self-contained module designed to train the student into the fundamentals and applications of relevant AI methodologies in contemporary medical physics. Extensive use is made of the Python programming ecosystem in demonstrating and illustrating practical applications of these AI methodologies using differing medical physics contexts including medical imaging, radiotherapy and virtual clinical trials. This module directly addresses SDG 3:'Good Health and Well-Being' and SDG 4:'Quality Education' by providing a robust foundational understanding of how quantitative & AI methodologies can be used to optimise the resolution of complex, data intense problems confronted by practicing medical physicists, as well as developing intuitive skills in how best to engage and progress data science solutions that are transferable to resolving contemporary societal challenges.
(Language of instruction: English)

Learning Outcomes
  1. Deploy effective programming skills using Python to preprocess and conduct exploratory analysis of medical physics related data products.
  2. Develop and deploy solutions using the Python programming and other cognate computational processing ecosystems to process image/time-series datasets, based around a solid understanding of the fundamental algorithms involved and their contextual relevance to contemporary medical physics applications.
  3. Develop and apply practical statistical and AI based solutions to complex data science problems in contemporary medical physics using the Python/R software ecosystems.
  4. Articulate and define the statistical properties of complex high-dimensional data & how to build, test and deploy a statistical/AI model based upon such data
  5. Design and implement clinical trials in support of precision medical physics applications, and the AI can play in their acceleration, expediting their potential impact for patient welfare.
Assessments
  • Written Assessment (70%)
  • Continuous Assessment (30%)
Teachers
The above information outlines module PH5122: "AI Applications in Medical Physics" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5110: Research Project


12 months long | Credits: 30

The student will conduct independent research on a clinical problem and summarise the research and results in a short thesis. The student will also be introduced to the concepts of ethics in research, publication and in medicine and the clinical practice.

Learning Outcomes
  1. Understand the basic concepts of conducting independent research
  2. Define a clinical problem and a possible solution grounded in the application of physics in medicine to solve it
  3. Conduct in-depth literature research focused on the research problem
  4. Conduct the proposed research, taking account of appropriate timelines and available resources
  5. Write a 10,000 word thesis, appropriately referenced, which describes the research in detail
  6. Successfully interact with clinical staff of different disciplines
  7. Present the research at a standard which is comparable to that of a scientific meeting
  8. Know the main principles of ethics in research and publication
  9. Understand the concepts of ethics and the role of ethics in medicine and in the clinical practice
  10. Recognize ethical issues and deal with the issues in a systematic manner with special considerations of the ethical aspects of AI applications
  11. Understand professionalism issues and be familiar with the codes of professional and ethical conduct in medical physics
Assessments
  • Continuous Assessment (20%)
  • Research (80%)
Teachers
The above information outlines module PH5110: "Research Project" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5104: Medical Imaging


Semester 1 | Credits: 10

An overview and introduction of the physical basis and clinical utility of the major imaging modalities which can be found in modern health care.

Learning Outcomes
  1. Understand general role of imaging in healthcare
  2. Understand the theoretical basis of image formation including Fourier Transforms and reconstruction from Projections.
  3. Understand the basic theory of general projection radiography. Understand physics and engineering principles of x-ray equipment.
  4. Understand the basic theory of Computed Tomography Scanning. Understand physics and engineering principles of CT scanners. Understand Image reconstruction.
  5. Understand the basic theory of ultrasound. Understand physics and engineering principles of ulrasound equipment.
  6. Understand the basic theory of nuclear medicine. Understand physics and engineering principles of gamma ray detection, SPECT and PET scanning equipment.
  7. Understand the basic theory of Magnetic resonance Imaging. Understand physics and engineering principles of MRI equipment.
  8. Understand the basics of image processing
Assessments
  • Continuous Assessment (100%)
Teachers
Reading List
  1. "Physical principles of medical imaging." by Perry Sprawls Madison
    Publisher: Medical Physics Pub.
  2. "The essential physics of medical imaging." by Jerrold T Bushberg Philadelphia
    Publisher: Lippincott Williams & Wilkins
  3. "Physics of radiology" by Anthony B. Wolbarst,
    Publisher: Medical Physics Pub
The above information outlines module PH5104: "Medical Imaging" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5103: Radiation Fundamentals


Semester 1 | Credits: 5

An overview and introduction of the physics of the interaction of ionising radiation with matter and the theory and practice of measuring radiation. Calibration of medical irradiators

Learning Outcomes
  1. Understand basics of Atomic and Nuclear Physics. Radiation from charged particles.
  2. Understand production of X-ray generation. Concept of X-Ray quality. Attenuation of Photon Beams in Matter.
  3. Understand interaction of Photons with Matter. Interaction of Charged Particles with matter. Introduction to Monte Carlo techniques.
  4. Understand basic concepts of Dosimetry. Including Cavity Theory.
  5. Understand design and operation of Radiation Detectors. Practical aspects and operation of Ionization chambers, electrometers and other detectors.
  6. Introduce to the basic principles of patient dosimetry
  7. Provide an overview of image detector technology
Assessments
  • Written Assessment (100%)
Teachers
Reading List
  1. "Radiation dosimetry." by Frank H Attix; William C Roesch; Eugene Tochilin
    Publisher: Academic Press 1966-69
  2. "The physics of radiology." by Harold Elford Johns John Robert Cunningham
    Publisher: Charles C. Thomas
The above information outlines module PH5103: "Radiation Fundamentals" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required AN230: Human Body Structure


Semester 1 | Credits: 5

Human Body Structure is delivered by the anatomy department to students at the first, second and masters level in university for whom anatomy is not a core degree element who require a sound basic knowledge of the structure of the human body. The content will cover topics including the following: * Organisation of human body, anatomical terminology, the principles of support and movement, the control systems of the human body, maintenance and continuity of the body and finally, biomechanics and functional anatomy of the limbs. The module will be comprised of lectures delivered in person or online as appropriate.
(Language of instruction: English)

Learning Outcomes
  1. Established a sound basic knowledge of the organization and structure of the human body including the location and anatomical relations of the major organ systems
  2. Developed a basic understanding of the principles of support and movement, the control systems of the body, maintenance and continuity of the human body.
  3. Understand and describe the biomechanics and functional anatomy of the human limbs and musculoskeletal system
  4. Explain how specific aspects of human anatomy relate to your field of study
  5. Begun to develop your ability to look up and synthesize anatomical subject matter in a self-directed manner
Assessments
  • Continuous Assessment (100%)
Teachers
Reading List
  1. "Introduction to the human body" by Gerard J. Tortora, Bryan Derrickson.
    ISBN: 9781118583180.
    Publisher: New York; Wiley
  2. "Human Anatomy" by Michael McKinley,Valerie O'Loughlin,Ronald Harris,Elizabeth Pennefather-O'Brien
    ISBN: 9780073525730.
    Publisher: McGraw-Hill Science/Engineering/Math
    Chapters: 2024-08-12T00:00:00
The above information outlines module AN230: "Human Body Structure" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required ST314: Introduction to Biostatistics


Semester 1 | Credits: 5

This course will introduce students to statistical concepts and thinking by providing a practical introduction to data analysis. The importance and practical usefulness of statistics in biomedical and clinical environments will be demonstrated through a large array of case studies. Students attending this course will be encouraged and equipped to apply simple statistical techniques to design, analyse and interpret studies in a wide range of disciplines.

Learning Outcomes
  1. understand the key concept of variability;
  2. understand the ideas of population, sample, parameter, statistic and probability;
  3. understand simple ideas of point estimation;
  4. recognise the additional benefits of calculating interval estimates for unknown parameters and be able to interpret interval estimates correctly;
  5. carry out a variety of commonly used hypothesis tests
  6. understand the difference between paired and independent data and be able to recognise both in practice;
  7. understand the aims and desirable features of a designed experiment;
  8. calculate the sample size needed for one and two sample problems.
Assessments
  • Continuous Assessment (100%)
Teachers
The above information outlines module ST314: "Introduction to Biostatistics" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5120: Radiological Imaging Technology and Safety


Semester 2 | Credits: 5

An overview of the Science of Risk and Safety. Basic concepts of ionizing and non-ionizing radiation safety. Quality Assurance
(Language of instruction: English)

Learning Outcomes
  1. Understand concepts of radiation safety in the workplace.
  2. Understand concepts of radiation shielding.
  3. Understand patient dose calculation in diagnostic radiology and has ability to use dedicated software for this.
  4. Understand quality assurance principles and quality control in diagnostic radiology.
  5. Understand basic concepts of safety with artificial optical radiation (lasers UV).
Assessments
  • Written Assessment (70%)
  • Continuous Assessment (30%)
Teachers
The above information outlines module PH5120: "Radiological Imaging Technology and Safety" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5121: Introduction to Workplace Hazards in Healthcare


Semester 2 | Credits: 5

This module aims to provide students with an introduction to skills required to anticipate, evaluate and control workplace hazards including radiation safety issues
(Language of instruction: English)

Learning Outcomes
  1. Understand the importance of the role of occupational health and safety risk assessment and the relevance of exposure measurement.
  2. Identify, locate and interpret health and safety legislation, guidance and standards relevant to the measurement and control of workplace hazards
  3. Identify, locate and interpret primary legislation and associated best practice and guidance governing safety in the use of ionizing and non-ionizing radiation in Ireland
  4. Describe techniques used to evaluate exposure risk from physical, chemical and biological hazards in the work environment
  5. Interpret and communicate occupational exposure data
  6. Appreciate the need for suitable workplace exposure control
  7. Appreciate the need for continuous professional development and the role of professional ethics in this area
  8. Understand basic concepts of Risk and Safety management and assessment in a hospital setting.
Assessments
  • Written Assessment (70%)
  • Continuous Assessment (30%)
Teachers
Reading List
  1. "Monitoring for health hazards at work." by J.W. Cherrie, R.M. Howie and S. Semple.
    Publisher: Blackwell Science.
  2. "Occupational Hygiene" by K. Gardiner and J.M. Harrington (Ed’s)
The above information outlines module PH5121: "Introduction to Workplace Hazards in Healthcare" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5102: Clinical Instrumentation


Semester 2 | Credits: 5

An overview of the role of physical phenomena and the way these are measured in the hospital.

Learning Outcomes
  1. Understand the physiological processes which give rise to physical signals which can be measured.
  2. Understand the basic theory of electrical measurement of biophysical signals. Describe the basic design of electrophysiological instrumentation
  3. Understand the basics of bio-fluid mechanics and the measurement of flow
  4. Understand the physics of the senses such as cutaneous and chemical sensors, auditory and vision sensing. Describe concepts of psychophysics.
  5. Understand electrical safety within the context of electromedical equipment
Assessments
  • Written Assessment (70%)
  • Continuous Assessment (30%)
Teachers
Reading List
  1. "Medical physics and biomedical engineering" by B. H Brown (Brian H.);
    Publisher: Institute of Physics Pub. C1999
  2. "Biomedical engineering fundamentals" by Joseph D. Bronzino
    Publisher: 1937-Boca Raton : CRC/Taylor & Francis
The above information outlines module PH5102: "Clinical Instrumentation" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Required PH5105: Physics of Radiotherapy


Semester 2 | Credits: 10

An overview of the basics of the physics of radiotherapy.

Learning Outcomes
  1. Understand interaction of a single beam of radiation in a scattering medium
  2. Understand basic concepts of treatment planning for combinations of photon beams.
  3. Be able to operate a Treatment Planning computer, prepare a treatment plan and interpret the results.
  4. Understand the interaction of particle beams with matter including electrons and heavy charged particles.
  5. Understand the physics and engineering principles of radiation treatment machines with an emphasis on linear accelerators
  6. Understand the concept of relative dosimetry
  7. Understand the basic principles of dose calculation algorithms
  8. Understand the concept of brachytherapy
  9. Understand concepts of dosimetry with unsealed source isotopes.
  10. Understand the basic concepts of radiobiology as it applies to radiotherapy
  11. Understand the calibration of radiotherapy machines
Assessments
  • Written Assessment (50%)
  • Continuous Assessment (50%)
Teachers
Reading List
  1. "The physics of radiation therapy," by Faiz M. Khan Baltimore, MD
    Publisher: Lippincott Williams & Wilkins
  2. "adiation oncology physics : a handbook for teachers and students." by Ervin D Podgorsak; International Atomic Energy Agency.
    Publisher: International Atomic Energy Agency.
  3. "The physics of radiology." by Harold Elford Johns John Robert Cunningham.
    Publisher: Charles C. Thomas
The above information outlines module PH5105: "Physics of Radiotherapy" and is valid from 2023 onwards.
Note: Module offerings and details may be subject to change.

Optional PH333: Quantum Physics


Semester 1 | Credits: 5

This module provides an introduction to quantum physics. It describes the origin of quantum physics using the theories of Planck for blackbody radiation and Einstein for specific heat. The course then progresses to describe matter using wave functions. The Schrodinger equation is introduced and solved for a number of model problems. The development of operators to extract information from matter waves is considered next. The formal structure of quantum mechanics is then introduced. The course finally considers a two identical particle problem and introduces the concept of the Pauli Exclusion Principle.
(Language of instruction: English)

Learning Outcomes
  1. Define terms and explain concepts relating to the physical principles covered by this module’s syllabus
  2. Describe the physical laws that connect terms and concepts covered by this module’s syllabus and, where appropriate, derive the mathematical relationships between those terms and concepts.
  3. Outline applications to real-world situations of the physical principles covered by this module’s syllabus.
  4. Analyze physical situations using concepts, laws and techniques learned in this module.
  5. Identify and apply pertinent physics concepts, and appropriate mathematical techniques, to solve physics problems related to the content of this module’s syllabus.
Assessments
  • Written Assessment (80%)
  • Continuous Assessment (20%)
Teachers
The above information outlines module PH333: "Quantum Physics" and is valid from 2021 onwards.
Note: Module offerings and details may be subject to change.

Optional BES5102: Cell & Molecular Biology: Advanced Technologies


Semester 1 | Credits: 5

This module it is designed to bring students to a common point where all will share the appropriate biological knowledge and understanding of the fundamentals in cellular and molecular biology. The module explores the following: cell composition; sub-cellular organelles; structure of DNA and RNA; transcription, protein synthesis; cell signalling, cell cycle; PubMed, DNA recombination, PCR; transformation, transfection; advanced molecular and cellular biology techniques.
(Language of instruction: English)

Learning Outcomes
  1. Illustrate the structure of DNA, explaining how DNA is replicated during the polymerase chain reaction technique.
  2. Explain what is meant by the 'genetic code' and how it relates to protein synthesis.
  3. Carry out a Pubmed search in order to identify molecules implicated in a human disease chosen by you.
  4. Use the National cancer and Biological Institute (NCBI) nucleotide database to discover the DNA sequence encoding a protein of your choice and determine the length of the coding sequence and the number of amino acids contained in the protein encoded.
  5. Describe how mammalian cell culture, PCR, DNA recombination, DNA plasmids, bacterial transformation and cellular transfection can be used to understand protein function, localisation and possible relevance to disease.
  6. Name the major structural components a mammalian cell and its constituent organelles.
  7. List cytoskeletal, extracellular matrix, membrane and signalling proteins involved in mammalian cell interactions with each other and with the extracellular environment.
  8. Explain how the mitochondria meet the energy requirements of the cell.
  9. Recognise cellular organelles involved in trafficking newly-synthesised proteins through and out of the cell.
  10. Summarise the main steps and in the cell cycle and proteins involved in regulation of each stage.
  11. Study and present on advanced technologies in cell and molecular biology
Assessments
  • Department-based Assessment (100%)
Teachers
Reading List
  1. "The Cell: A Molecular Approach" by Geoffrey M. Cooper, Robert E. Hausman
    Publisher: ASM press
The above information outlines module BES5102: "Cell & Molecular Biology: Advanced Technologies" and is valid from 2015 onwards.
Note: Module offerings and details may be subject to change.

Optional PH338: Properties of Materials


Semester 1 | Credits: 5

This course provides a comprehensive introduction to the physics of materials. The mechanical, thermal, electronic, and optical properties of “hard” and “soft” condensed matter are introduced using concepts primarily based on classical physics with some quantum concepts where appropriate.
(Language of instruction: English)

Learning Outcomes
  1. Define terms and explain concepts relating to the physical principles covered by this module’s syllabus.
  2. Describe the physical laws that connect terms and concepts covered by this module’s syllabus and, where appropriate, derive the mathematical relationships between those terms and concepts.
  3. Outline applications to real-world situations of the physical principles covered by this module’s syllabus.
  4. Analyze physical situations using concepts, laws and techniques learned in this module.
  5. Identify and apply pertinent physics concepts, and appropriate mathematical techniques, to solve physics problems related to the content of this module’s syllabus.
Assessments
  • Written Assessment (80%)
  • Continuous Assessment (20%)
Teachers
The above information outlines module PH338: "Properties of Materials" and is valid from 2021 onwards.
Note: Module offerings and details may be subject to change.

Optional PH339: Radiation and Medical Physics


Semester 1 | Credits: 5

This module provides an introduction to the medical imaging and instrumentation aspects of real imaging environments, ranging from obsolete modalities to the modern tomographic imaging modalities (such as PET and SPECT). This module also covers the fundamental processes involved in forming images using ionising radiation, safety issues associated with ionising radiation and methods of radiation detection.
(Language of instruction: English)

Learning Outcomes
  1. define terms and explain concepts relating to the physical principles covered by this module’s syllabus.
  2. describe the physical laws that connect terms and concepts covered by this module’s syllabus and, where appropriate, derive the mathematical relationships between those terms and concepts.
  3. outline applications to real-world situations of the physical principles covered by this module’s syllabus.
  4. analyze physical situations using concepts, laws and techniques learned in this module.
  5. identify and apply pertinent physics concepts, and appropriate mathematical techniques, to solve physics problems related to the content of this module’s syllabus.
  6. analyze data, interpret results and draw appropriate conclusions.
  7. prepare scientific reports.
Assessments
  • Written Assessment (80%)
  • Continuous Assessment (20%)
Teachers
The above information outlines module PH339: "Radiation and Medical Physics" and is valid from 2021 onwards.
Note: Module offerings and details may be subject to change.

Optional PH335: Nuclear & Particle Physics


Semester 2 | Credits: 5

In this module students learn how subatomic particles form nuclei, study nuclear properties, and radioactive decay, and see how nuclear energy may be released in fission and fusion processes. Students also study fundamental particles, which are the building blocks of nature, and consider the ways in which these particles interact with each other. Prior knowledge is assumed to the level of material covered in PH2103Thermodynamics and Atomic Physics and PH333 Quantum Physics.
(Language of instruction: English)

Learning Outcomes
  1. Define terms and explain concepts relating to the physical principles covered by this module’s syllabus.
  2. Describe the physical laws that connect terms and concepts covered by this module’s syllabus and, where appropriate, derive the mathematical relationships between those terms and concepts.
  3. Outline applications to real-world situations of the physical principles covered by this module’s syllabus.
  4. Analyze physical situations using concepts, laws and techniques learned in this module.
  5. Identify and apply pertinent physics concepts, and appropriate mathematical techniques, to solve physics problems related to the content of this module’s syllabus.
Assessments
  • Written Assessment (80%)
  • Continuous Assessment (20%)
Teachers
The above information outlines module PH335: "Nuclear & Particle Physics" and is valid from 2021 onwards.
Note: Module offerings and details may be subject to change.

Why Choose This Course?

Career Opportunities

The course has been successful in its aims in providing individuals with a good grounding in Medical Physics.

A recent survey of graduates showed that around 75% of them had found employment in a Medical Physics-based career. This includes several individuals who have pursued or are pursuing a PhD. About 20% are employed abroad, in countries like the UK , the US, Australia and New Zealand.

Who’s Suited to This Course

Learning Outcomes

Transferable Skills Employers Value

Work Placement

Study Abroad

Related Student Organisations

Course Fees

Fees: EU

€8,640 p.a. (including levy) 2024/25

Fees: Tuition

€8,500 p.a. 2024/25

Fees: Student levy

€140 p.a. 2024/25

Fees: Non EU

€33,000 p.a. (€33,140 including levy) 2024/25


Postgraduate students in receipt of a SUSI grant—please note an F4 grant is where SUSI will pay €4,000 towards your tuition (2024/25).  You will be liable for the remainder of the total fee.  A P1 grant is where SUSI will pay tuition up to a maximum of €6,270. SUSI will not cover the student levy of €140.

Postgraduate fee breakdown = Tuition (EU or NON EU) + Student levy as outlined above.

Note to non-EU students: learn about the 24-month Stayback Visa here

Find out More

Programme Director
Dr Christoph Kleefeld 
T: +353 91 542 870
E: christoph.kleefeld@universityofgalway.ie

International Scholarships

Postgraduate Scholarships